Re: [CFT 01/11] dmaengine: add OMAP DMA engine driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 7, 2012 at 6:10 PM, S, Venkatraman <svenkatr@xxxxxx> wrote:
> On Thu, Jun 7, 2012 at 4:36 PM, Russell King
> <rmk+kernel@xxxxxxxxxxxxxxxx> wrote:
>> Tested-by: Tony Lindgren <tony@xxxxxxxxxxx>
>> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
>> ---
>>  drivers/dma/Kconfig      |    6 +
>>  drivers/dma/Makefile     |    1 +
>>  drivers/dma/omap-dma.c   |  522 ++++++++++++++++++++++++++++++++++++++++++++++
>>  include/linux/omap-dma.h |   24 ++
>>  4 files changed, 553 insertions(+), 0 deletions(-)
>>  create mode 100644 drivers/dma/omap-dma.c
>>  create mode 100644 include/linux/omap-dma.h
>>
>> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
>> index eb2b60e..8be3bf6 100644
>> --- a/drivers/dma/Kconfig
>> +++ b/drivers/dma/Kconfig
>> @@ -261,6 +261,12 @@ config DMA_SA11X0
>>          SA-1110 SoCs.  This DMA engine can only be used with on-chip
>>          devices.
>>
>> +config DMA_OMAP
>> +       tristate "OMAP DMA support"
>> +       depends on ARCH_OMAP
>> +       select DMA_ENGINE
>> +       select DMA_VIRTUAL_CHANNELS
>> +
>>  config DMA_ENGINE
>>        bool
>>
>> diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
>> index fc05f7d..ddc291a 100644
>> --- a/drivers/dma/Makefile
>> +++ b/drivers/dma/Makefile
>> @@ -29,3 +29,4 @@ obj-$(CONFIG_PCH_DMA) += pch_dma.o
>>  obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
>>  obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
>>  obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
>> +obj-$(CONFIG_DMA_OMAP) += omap-dma.o
>> diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
>> new file mode 100644
>> index 0000000..500bc71
>> --- /dev/null
>> +++ b/drivers/dma/omap-dma.c
>> @@ -0,0 +1,522 @@
>> +/*
>> + * OMAP DMAengine support
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +#include <linux/dmaengine.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/list.h>
>> +#include <linux/module.h>
>> +#include <linux/omap-dma.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/spinlock.h>
>> +
>> +#include "virt-dma.h"
> Russell,
>  I applied your entire series on 3.5-rc1 and build fails as it can't
> find virt-dma.h
> Perhaps a missed "git add" ?
>
Ok I reread your messages again and these 11 are based on the generic
dma-engine series.

>> +#include <plat/dma.h>
>> +
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux