Hi Benoit,
On 05/10/2012 04:56 AM, Cousson, Benoit wrote:
> Hi Jon & Ming,
>
> On 5/9/2012 11:35 PM, Jon Hunter wrote:
>> From: Ming Lei<ming.lei@xxxxxxxxxxxxx>
>>
>> The following modules is required to be enabled before configuring
>> cross trigger interface for enabling pmu irq:
>>
>> l3_instr, l3_main_3, debugss
>>
>> so build the arm-pmu device via the three hwmods.
>>
>> Cc: Ming Lei<ming.lei@xxxxxxxxxxxxx>
>> Cc: Will Deacon<will.deacon@xxxxxxx>
>> Cc: Benoit Cousson<b-cousson@xxxxxx>
>> Cc: Paul Walmsley<paul@xxxxxxxxx>
>> Cc: Kevin Hilman<khilman@xxxxxx>
>>
>> Signed-off-by: Ming Lei<ming.lei@xxxxxxxxxxxxx>
>> Signed-off-by: Will Deacon<will.deacon@xxxxxxx>
>> Signed-off-by: Jon Hunter<jon-hunter@xxxxxx>
>> ---
>> arch/arm/mach-omap2/devices.c | 61
>> ++++++++++++++++++++++++++++++++++++++---
>> 1 files changed, 57 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/devices.c
>> b/arch/arm/mach-omap2/devices.c
>> index 58682d1..d75b7d3 100644
>> --- a/arch/arm/mach-omap2/devices.c
>> +++ b/arch/arm/mach-omap2/devices.c
>> @@ -423,14 +423,67 @@ static struct platform_device omap_pmu_device = {
>> .num_resources = 1,
>> };
>>
>> -static void omap_init_pmu(void)
>> +static struct arm_pmu_platdata omap4_pmu_data;
>> +static struct omap_device_pm_latency omap_pmu_latency[] = {
>> + [0] = {
>> + .deactivate_func = omap_device_idle_hwmods,
>> + .activate_func = omap_device_enable_hwmods,
>> + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
>> + },
>> +};
>
> You can get rid of that, and use a NULL value during
> omap_device_build_ss. It will use the default value automatically.
I have removed this now for V2.
>> +static struct platform_device* __init omap4_init_pmu(void)
>> {
>> - if (cpu_is_omap24xx())
>> + int id = -1;
>> + const char *hw;
>> + struct platform_device *pd;
>> + struct omap_hwmod* oh[3];
>> + char *dev_name = "arm-pmu";
>> +
>> + hw = "l3_main_3";
>> + oh[0] = omap_hwmod_lookup(hw);
>> + if (!oh[0]) {
>> + pr_err("Could not look up %s hwmod\n", hw);
>> + return NULL;
>> + }
>> + hw = "l3_instr";
>> + oh[1] = omap_hwmod_lookup(hw);
>> + if (!oh[1]) {
>> + pr_err("Could not look up %s hwmod\n", hw);
>> + return NULL;
>> + }
>> + hw = "debugss";
>> + oh[2] = omap_hwmod_lookup(hw);
>> + if (!oh[2]) {
>> + pr_err("Could not look up %s hwmod\n", hw);
>> + return NULL;
>> + }
>> +
>> + pd = omap_device_build_ss(dev_name, id, oh, 3,&omap4_pmu_data,
>> + sizeof(omap4_pmu_data),
>> + omap_pmu_latency,
>> + ARRAY_SIZE(omap_pmu_latency), 0);
>> + WARN(IS_ERR(pd), "Can't build omap_device for %s.\n",
>> + dev_name);
>> + return pd;
>> +}
>> +static void __init omap_init_pmu(void)
>> +{
>> + if (cpu_is_omap24xx()) {
>> omap_pmu_device.resource =&omap2_pmu_resource;
>
> Ideally, OMAP2 and 3 should use the hwmod device creation as well.
Do you know for OMAP2/3 what hwmods are needed for PMU support? Is it
just the MPU?
I see two options here for OMAP2/3 ...
1. Add the appropriate PMU interrupts to the MPU HWMOD and use the MPU
HWMOD to build the pmu device.
2. Create a new PMU HWMOD for OMAP2/3.
Please note that for 4460, I can get PMU to work without needing the EMU
PD if I use the PMU interrupts and not CTI. So this really simplifies
matters for 4460 (and 4470). For 4460 I have created the PMU device by
just using the MPU HWMOD and adding the PMU interrupts to the MPU HWMOD.
Cheers
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
