Hi Mohammed! Thanks a lot! This code certainly can be used as a reference. I just wonder why it was not possible to rewrite tps65910 driver to comply with current twl interface? For example tps65910 API for the Craneboard is 100% the same as for OMAP3 and therefore porting features from Beagleboard to any board with tps65910 would be like 1-2-3. am33xx BSP is supported by TI, omap3evm is supported by TI, though both BSPs have absolutely different PMIC API in spite of they implement the same features.. Max 2012/5/18 Mohammed, Afzal <afzal@xxxxxx>: > Hi Maxim, > > On Fri, May 18, 2012 at 13:23:53, Maxim Podbereznyy wrote: >> Hey guys! >> >> Who knows how to initialize and use tps65910 driver in linux with >> am3517? I designed a board using the Craneboard schematic as a >> reference. Mistral provides the kernel 2.6.32 and it works fine. Now >> I'm porting the BSP to kernel 3.0.17 and don't know how to implement >> voltage regulator features with the tps65910 driver (it appeared in >> kernel 3.0 ) under kernel 3.0 environment. >> >> I'm watching board-omap3beagle.c as a reference and tps65910.c driver >> and can't find any correlation. Any suggestions? >> >> Any help is appreciated! > > AM335X EVM (support not yet in mainline) works with tps65910, in case AM335X > release helps you, > > git://arago-project.org/git/projects/linux-am33x.git v3.2_AM335xPSP_04.06.00.07 > > Regards > Afzal -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
