On Thu, May 17, 2012 at 4:35 AM, Kevin Hilman <khilman@xxxxxx> wrote:
> Tero Kristo <t-kristo@xxxxxx> writes:
>
>> From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
>>
>> The ROM BUG is when MPU Domain OFF wake up sequence that can compromise
>> IVA and Tesla execution.
>>
>> At wakeup from MPU OFF on HS device only (not GP device), when
>> restoring the Secure RAM, the ROM Code reconfigures the clocks the
>> same way it is done at Cold Reset.
>
> Ouch.
>
>> The IVAHD Clocks and Power Domain settings are:
>> IVAHD_CM2 IVAHD_CLKCTRL_MODULE_MODE = DISABLE
>> IVAHD_CM2 SL2_CLKCTRL_MODULE_MODE = DISABLE
>> IVAHD_CM2 SL2_CLKSTCTRL_CLKTRCTRL = HW_AUTO
>> IVAHD_PRM IVAHD_PWRSTCTRL_POWERSTATE = OFF
>> The TESLA Clocks and Power Domain settings are:
>> TESLA_CM1 TESLA_CLKCTRL_MODULE_MODE = DISABLE
>> TESLA_CM1 TESLA_CLKSTCTRL_CLKTRCTRL = HW_AUTO
>> TESLA_PRM TESLA_PWRSTCTRL_POWERSTATE = OFF
>>
>> This patch fixes the low power OFF mode code so that the these
>> registers are saved and restore across MPU OFF state.
>>
>> Also because of this limitation, MPU OFF alone is not targeted without
>> device OFF to avoid IVAHD and TESLA execution impact
>
> I don't see where this restriction is implemented.
>
It's handled and the patch is in mainline for some time.
We de-scoped MPU OFF from OMAP4430 devices in SW and
hardware team de-scoped it in hardware from OMAP4460 onwards.
Deepest state on MPUSS cluster is OSWR.
------------
commit a57341f780660800e1463eaedb80ed152ad6b5de
Author: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Date: Sat Jul 9 20:42:59 2011 -0600
OMAP4: powerdomain data: Remove unsupported MPU powerdomain state
On OMAP4430 devices, because of boot ROM code bug, MPU OFF state can't
be attempted independently. When coming out of MPU OFF state, ROM code
disables the clocks of IVAHD, TESLA which is not desirable. Hence the
MPU OFF state is not usable on OMAP4430 devices.
OMAP4460 onwards, MPU OFF state will be descoped completely because
the DDR firewall falls in MPU power domain. When the MPU hit OFF state,
DDR won't be accessible for other initiators. The deepest state supported
is open switch retention (OSWR) just like CORE and PER PD on OMAP4430.
So in summary MPU power domain OFF state is not supported on OMAP4
and onwards designs. Thanks to new PRCM design, device off mode can
still be achieved with power domains hitting OSWR state.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
[b-cousson@xxxxxx: Fix changelog typos]
Signed-off-by: Benoit Cousson <b-cousson@xxxxxx>
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
---------------------------------------------
> And, can this be hooked into cluster PM notifiers.
>
Not needed.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
