Palmas has both Switched Mode (SMPS) and Linear (LDO) regulators in it.
This regulator driver allows software control of these regulators.
The regulators available on Palmas series chips vary depending on the muxing.
This is handled automatically in the driver by reading the mux info from OTP.
Signed-off-by: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
---
drivers/regulator/palmas-regulator.c | 822 ++++++++++++++++++++++++++++++++++
include/linux/mfd/palmas.h | 125 ++++++
2 files changed, 947 insertions(+)
create mode 100644 drivers/regulator/palmas-regulator.c
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
new file mode 100644
index 0000000..c4435f6
--- /dev/null
+++ b/drivers/regulator/palmas-regulator.c
@@ -0,0 +1,822 @@
+/*
+ * Driver for Regulator part of Palmas PMIC Chips
+ *
+ * Copyright 2011-2012 Texas Instruments Inc.
+ *
+ * Author: Graeme Gregory <gg@xxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/mfd/palmas.h>
+
+struct regs_info {
+ char *name;
+ u8 vsel_addr;
+ u8 ctrl_addr;
+ u8 tstep_addr;
+};
+
+static const struct regs_info palmas_regs_info[] = {
+ {
+ .name = "SMPS12",
+ .vsel_addr = PALMAS_SMPS12_VOLTAGE,
+ .ctrl_addr = PALMAS_SMPS12_CTRL,
+ .tstep_addr = PALMAS_SMPS12_TSTEP,
+ },
+ {
+ .name = "SMPS123",
+ .vsel_addr = PALMAS_SMPS12_VOLTAGE,
+ .ctrl_addr = PALMAS_SMPS12_CTRL,
+ .tstep_addr = PALMAS_SMPS12_TSTEP,
+ },
+ {
+ .name = "SMPS3",
+ .vsel_addr = PALMAS_SMPS3_VOLTAGE,
+ .ctrl_addr = PALMAS_SMPS3_CTRL,
+ },
+ {
+ .name = "SMPS45",
+ .vsel_addr = PALMAS_SMPS45_VOLTAGE,
+ .ctrl_addr = PALMAS_SMPS45_CTRL,
+ .tstep_addr = PALMAS_SMPS45_TSTEP,
+ },
+ {
+ .name = "SMPS457",
+ .vsel_addr = PALMAS_SMPS45_VOLTAGE,
+ .ctrl_addr = PALMAS_SMPS45_CTRL,
+ .tstep_addr = PALMAS_SMPS45_TSTEP,
+ },
+ {
+ .name = "SMPS6",
+ .vsel_addr = PALMAS_SMPS6_VOLTAGE,
+ .ctrl_addr = PALMAS_SMPS6_CTRL,
+ .tstep_addr = PALMAS_SMPS6_TSTEP,
+ },
+ {
+ .name = "SMPS7",
+ .vsel_addr = PALMAS_SMPS7_VOLTAGE,
+ .ctrl_addr = PALMAS_SMPS7_CTRL,
+ },
+ {
+ .name = "SMPS8",
+ .vsel_addr = PALMAS_SMPS8_VOLTAGE,
+ .ctrl_addr = PALMAS_SMPS8_CTRL,
+ .tstep_addr = PALMAS_SMPS8_TSTEP,
+ },
+ {
+ .name = "SMPS9",
+ .vsel_addr = PALMAS_SMPS9_VOLTAGE,
+ .ctrl_addr = PALMAS_SMPS9_CTRL,
+ },
+ {
+ .name = "SMPS10",
+ },
+ {
+ .name = "LDO1",
+ .vsel_addr = PALMAS_LDO1_VOLTAGE,
+ .ctrl_addr = PALMAS_LDO1_CTRL,
+ },
+ {
+ .name = "LDO2",
+ .vsel_addr = PALMAS_LDO2_VOLTAGE,
+ .ctrl_addr = PALMAS_LDO2_CTRL,
+ },
+ {
+ .name = "LDO3",
+ .vsel_addr = PALMAS_LDO3_VOLTAGE,
+ .ctrl_addr = PALMAS_LDO3_CTRL,
+ },
+ {
+ .name = "LDO4",
+ .vsel_addr = PALMAS_LDO4_VOLTAGE,
+ .ctrl_addr = PALMAS_LDO4_CTRL,
+ },
+ {
+ .name = "LDO5",
+ .vsel_addr = PALMAS_LDO5_VOLTAGE,
+ .ctrl_addr = PALMAS_LDO5_CTRL,
+ },
+ {
+ .name = "LDO6",
+ .vsel_addr = PALMAS_LDO6_VOLTAGE,
+ .ctrl_addr = PALMAS_LDO6_CTRL,
+ },
+ {
+ .name = "LDO7",
+ .vsel_addr = PALMAS_LDO7_VOLTAGE,
+ .ctrl_addr = PALMAS_LDO7_CTRL,
+ },
+ {
+ .name = "LDO8",
+ .vsel_addr = PALMAS_LDO8_VOLTAGE,
+ .ctrl_addr = PALMAS_LDO8_CTRL,
+ },
+ {
+ .name = "LDO9",
+ .vsel_addr = PALMAS_LDO9_VOLTAGE,
+ .ctrl_addr = PALMAS_LDO9_CTRL,
+ },
+ {
+ .name = "LDOLN",
+ .vsel_addr = PALMAS_LDOLN_VOLTAGE,
+ .ctrl_addr = PALMAS_LDOLN_CTRL,
+ },
+ {
+ .name = "LDOUSB",
+ .vsel_addr = PALMAS_LDOUSB_VOLTAGE,
+ .ctrl_addr = PALMAS_LDOUSB_CTRL,
+ },
+};
+
+#define SMPS_CTRL_MODE_OFF 0x00
+#define SMPS_CTRL_MODE_ON 0x01
+#define SMPS_CTRL_MODE_ECO 0x02
+#define SMPS_CTRL_MODE_PWM 0x03
+
+/* These values are derived from the data sheet. And are the number of steps
+ * where there is a voltage change, the ranges at beginning and end of register
+ * max/min values where there are no change are ommitted.
+ *
+ * So they are basically (maxV-minV)/stepV
+ */
+#define PALMAS_SMPS_NUM_VOLTAGES 116
+#define PALMAS_SMPS10_NUM_VOLTAGES 2
+#define PALMAS_LDO_NUM_VOLTAGES 50
+
+#define SMPS10_VSEL (1<<3)
+#define SMPS10_BOOST_EN (1<<2)
+#define SMPS10_BYPASS_EN (1<<1)
+#define SMPS10_SWITCH_EN (1<<0)
+
+#define REGULATOR_SLAVE 0
+
+static int palmas_smps_read(struct palmas *palmas, unsigned int reg,
+ unsigned int *dest)
+{
+ unsigned int addr;
+
+ addr = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, reg);
+
+ return regmap_read(palmas->regmap[REGULATOR_SLAVE], addr, dest);
+}
+
+static int palmas_smps_write(struct palmas *palmas, unsigned int reg,
+ unsigned int value)
+{
+ unsigned int addr;
+
+ addr = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, reg);
+
+ return regmap_write(palmas->regmap[REGULATOR_SLAVE], addr, value);
+}
+
+static int palmas_ldo_read(struct palmas *palmas, unsigned int reg,
+ unsigned int *dest)
+{
+ unsigned int addr;
+
+ addr = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, reg);
+
+ return regmap_read(palmas->regmap[REGULATOR_SLAVE], addr, dest);
+}
+
+static int palmas_ldo_write(struct palmas *palmas, unsigned int reg,
+ unsigned int value)
+{
+ unsigned int addr;
+
+ addr = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, reg);
+
+ return regmap_write(palmas->regmap[REGULATOR_SLAVE], addr, value);
+}
+
+static int palmas_is_enabled_smps(struct regulator_dev *dev)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ unsigned int reg;
+
+ palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
+
+ reg &= PALMAS_SMPS12_CTRL_STATUS_MASK;
+ reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT;
+
+ return !!(reg);
+}
+
+static int palmas_enable_smps(struct regulator_dev *dev)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ unsigned int reg;
+
+ palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
+
+ reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
+ reg |= SMPS_CTRL_MODE_ON;
+
+ palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg);
+
+ return 0;
+}
+
+static int palmas_disable_smps(struct regulator_dev *dev)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ unsigned int reg;
+
+ palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
+
+ reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
+
+ palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg);
+
+ return 0;
+}
+
+
+static int palmas_set_mode_smps(struct regulator_dev *dev, unsigned int mode)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ unsigned int reg;
+
+ palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
+ reg &= ~PALMAS_SMPS12_CTRL_STATUS_MASK;
+ reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT;
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ reg |= SMPS_CTRL_MODE_ON;
+ break;
+ case REGULATOR_MODE_IDLE:
+ reg |= SMPS_CTRL_MODE_ECO;
+ break;
+ case REGULATOR_MODE_FAST:
+ reg |= SMPS_CTRL_MODE_PWM;
+ break;
+ default:
+ return -EINVAL;
+ }
+ palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg);
+
+ return 0;
+}
+
+static unsigned int palmas_get_mode_smps(struct regulator_dev *dev)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ unsigned int reg;
+
+ palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
+ reg &= PALMAS_SMPS12_CTRL_STATUS_MASK;
+ reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT;
+
+ switch (reg) {
+ case SMPS_CTRL_MODE_ON:
+ return REGULATOR_MODE_NORMAL;
+ case SMPS_CTRL_MODE_ECO:
+ return REGULATOR_MODE_IDLE;
+ case SMPS_CTRL_MODE_PWM:
+ return REGULATOR_MODE_FAST;
+ }
+
+ return 0;
+}
+
+static int palmas_list_voltage_smps(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ int mult = 1;
+
+ if (!selector)
+ return 0;
+
+ /* Read the multiplier set in VSEL register to return
+ * the correct voltage.
+ */
+ if (pmic->range[id])
+ mult = 2;
+
+ /* Voltage is (0.49V + (selector * 0.01V)) * RANGE
+ * as defined in data sheet. RANGE is either x1 or x2
+ */
+ return (490000 + (selector * 10000)) * mult;
+}
+
+static int palmas_get_voltage_smps_sel(struct regulator_dev *dev)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ int selector;
+ unsigned int reg;
+ unsigned int addr;
+
+ addr = palmas_regs_info[id].vsel_addr;
+
+ palmas_smps_read(pmic->palmas, addr, ®);
+
+ selector = reg & PALMAS_SMPS12_VOLTAGE_VSEL_MASK;
+
+ /* Adjust selector to match list_voltage ranges */
+ if ((selector > 0) && (selector < 6))
+ selector = 6;
+ if (!selector)
+ selector = 5;
+ if (selector > 121)
+ selector = 121;
+ selector -= 5;
+
+ return selector;
+}
+
+static int palmas_set_voltage_smps_sel(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ unsigned int reg = 0;
+ unsigned int addr;
+
+ addr = palmas_regs_info[id].vsel_addr;
+
+ /* Make sure we don't change the value of RANGE */
+ if (pmic->range[id])
+ reg |= PALMAS_SMPS12_VOLTAGE_RANGE;
+
+ /* Adjust the linux selector into range used in VSEL register */
+ if (selector)
+ reg |= selector + 5;
+
+ palmas_smps_write(pmic->palmas, addr, reg);
+
+ return 0;
+}
+
+static int palmas_map_voltage_smps(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int ret, voltage;
+
+ ret = ((min_uV - 500000) / 10000) + 1;
+ if (ret < 0)
+ return ret;
+
+ /* Map back into a voltage to verify we're still in bounds */
+ voltage = palmas_list_voltage_smps(rdev, ret);
+ if (voltage < min_uV || voltage > max_uV)
+ return -EINVAL;
+
+ return ret;
+}
+
+static struct regulator_ops palmas_ops_smps = {
+ .is_enabled = palmas_is_enabled_smps,
+ .enable = palmas_enable_smps,
+ .disable = palmas_disable_smps,
+ .set_mode = palmas_set_mode_smps,
+ .get_mode = palmas_get_mode_smps,
+ .get_voltage_sel = palmas_get_voltage_smps_sel,
+ .set_voltage_sel = palmas_set_voltage_smps_sel,
+ .list_voltage = palmas_list_voltage_smps,
+ .map_voltage = palmas_map_voltage_smps,
+};
+
+static int palmas_list_voltage_smps10(struct regulator_dev *dev,
+ unsigned selector)
+{
+ return 3750000 + (selector * 1250000);
+}
+
+static struct regulator_ops palmas_ops_smps10 = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .list_voltage = palmas_list_voltage_smps10,
+};
+
+static int palmas_is_enabled_ldo(struct regulator_dev *dev)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ unsigned int reg;
+
+ palmas_ldo_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®);
+
+ reg &= PALMAS_LDO1_CTRL_STATUS;
+
+ return !!(reg);
+}
+
+static int palmas_list_voltage_ldo(struct regulator_dev *dev,
+ unsigned selector)
+{
+ if (!selector)
+ return 0;
+
+ /* voltage is 0.85V + (selector * 0.05v) */
+ return 850000 + (selector * 50000);
+}
+
+static int palmas_get_voltage_ldo_sel(struct regulator_dev *dev)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ int selector;
+ unsigned int reg;
+ unsigned int addr;
+
+ addr = palmas_regs_info[id].vsel_addr;
+
+ palmas_ldo_read(pmic->palmas, addr, ®);
+
+ selector = reg & PALMAS_LDO1_VOLTAGE_VSEL_MASK;
+
+ /* Adjust selector to match list_voltage ranges */
+ if (selector > 49)
+ selector = 49;
+
+ return selector;
+}
+
+static int palmas_set_voltage_ldo_sel(struct regulator_dev *dev,
+ unsigned selector)
+{
+ struct palmas_pmic *pmic = rdev_get_drvdata(dev);
+ int id = rdev_get_id(dev);
+ unsigned int reg = 0;
+ unsigned int addr;
+
+ addr = palmas_regs_info[id].vsel_addr;
+
+ reg = selector;
+
+ palmas_ldo_write(pmic->palmas, addr, reg);
+
+ return 0;
+}
+
+static int palmas_map_voltage_ldo(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ int ret, voltage;
+
+ ret = ((min_uV - 900000) / 50000) + 1;
+ if (ret < 0)
+ return ret;
+
+ /* Map back into a voltage to verify we're still in bounds */
+ voltage = palmas_list_voltage_ldo(rdev, ret);
+ if (voltage < min_uV || voltage > max_uV)
+ return -EINVAL;
+
+ return ret;
+}
+
+static struct regulator_ops palmas_ops_ldo = {
+ .is_enabled = palmas_is_enabled_ldo,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = palmas_get_voltage_ldo_sel,
+ .set_voltage_sel = palmas_set_voltage_ldo_sel,
+ .list_voltage = palmas_list_voltage_ldo,
+ .map_voltage = palmas_map_voltage_ldo,
+};
+
+/*
+ * setup the hardware based sleep configuration of the SMPS/LDO regulators
+ * from the platform data. This is different to the software based control
+ * supported by the regulator framework as it is controlled by toggling
+ * pins on the PMIC such as PREQ, SYSEN, ...
+ */
+static int palmas_smps_init(struct palmas *palmas, int id,
+ struct palmas_reg_init *reg_init)
+{
+ unsigned int reg;
+ unsigned int addr;
+ int ret;
+
+ addr = palmas_regs_info[id].ctrl_addr;
+
+ ret = palmas_smps_read(palmas, addr, ®);
+ if (ret)
+ return ret;
+
+ if (id != PALMAS_REG_SMPS10) {
+ if (reg_init->warm_reset)
+ reg |= PALMAS_SMPS12_CTRL_WR_S;
+
+ if (reg_init->roof_floor)
+ reg |= PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN;
+
+ if (reg_init->mode_sleep) {
+ reg &= ~PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK;
+ reg |= reg_init->mode_sleep <<
+ PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT;
+ }
+ } else {
+ if (reg_init->mode_sleep) {
+ reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
+ reg |= reg_init->mode_sleep <<
+ PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
+ }
+
+ }
+ ret = palmas_smps_write(palmas, addr, reg);
+ if (ret)
+ return ret;
+
+ if (palmas_regs_info[id].tstep_addr && reg_init->tstep) {
+ addr = palmas_regs_info[id].tstep_addr;
+
+ reg = reg_init->tstep & PALMAS_SMPS12_TSTEP_TSTEP_MASK;
+
+ ret = palmas_smps_write(palmas, addr, reg);
+ if (ret)
+ return ret;
+ }
+
+ if (palmas_regs_info[id].vsel_addr && reg_init->vsel) {
+ addr = palmas_regs_info[id].vsel_addr;
+
+ reg = reg_init->vsel;
+
+ ret = palmas_smps_write(palmas, addr, reg);
+ if (ret)
+ return ret;
+ }
+
+
+ return 0;
+}
+
+static int palmas_ldo_init(struct palmas *palmas, int id,
+ struct palmas_reg_init *reg_init)
+{
+ unsigned int reg;
+ unsigned int addr;
+ int ret;
+
+ addr = palmas_regs_info[id].ctrl_addr;
+
+ ret = palmas_smps_read(palmas, addr, ®);
+ if (ret)
+ return ret;
+
+ if (reg_init->warm_reset)
+ reg |= PALMAS_LDO1_CTRL_WR_S;
+
+ if (reg_init->mode_sleep)
+ reg |= PALMAS_LDO1_CTRL_MODE_SLEEP;
+
+ ret = palmas_smps_write(palmas, addr, reg);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static __devinit int palmas_probe(struct platform_device *pdev)
+{
+ struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
+ struct palmas_pmic_platform_data *pdata = pdev->dev.platform_data;
+ struct regulator_dev *rdev;
+ struct regulator_config config = { };
+ struct palmas_pmic *pmic;
+ struct palmas_reg_init *reg_init;
+ int id = 0, ret;
+ unsigned int addr, reg;
+
+ if (!pdata)
+ return -EINVAL;
+ if (!pdata->reg_data)
+ return -EINVAL;
+
+ pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+ if (!pmic)
+ return -ENOMEM;
+
+ pmic->dev = &pdev->dev;
+ pmic->palmas = palmas;
+ palmas->pmic = pmic;
+ platform_set_drvdata(pdev, pmic);
+
+ ret = palmas_smps_read(palmas, PALMAS_SMPS_CTRL, ®);
+ if (ret)
+ goto err_unregister_regulator;
+
+ if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN)
+ pmic->smps123 = 1;
+
+ if (reg & PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN)
+ pmic->smps457 = 1;
+
+ config.regmap = palmas->regmap[REGULATOR_SLAVE];
+ config.dev = &pdev->dev;
+ config.driver_data = pmic;
+
+ for (id = 0; id < PALMAS_REG_LDO1; id++) {
+
+ /*
+ * Miss out regulators which are not available due
+ * to slaving configurations.
+ */
+ switch (id) {
+ case PALMAS_REG_SMPS12:
+ case PALMAS_REG_SMPS3:
+ if (pmic->smps123)
+ continue;
+ break;
+ case PALMAS_REG_SMPS123:
+ if (!pmic->smps123)
+ continue;
+ break;
+ case PALMAS_REG_SMPS45:
+ case PALMAS_REG_SMPS7:
+ if (pmic->smps457)
+ continue;
+ break;
+ case PALMAS_REG_SMPS457:
+ if (!pmic->smps457)
+ continue;
+ }
+
+ /* Register the regulators */
+ pmic->desc[id].name = palmas_regs_info[id].name;
+ pmic->desc[id].id = id;
+
+ if (id != PALMAS_REG_SMPS10) {
+ pmic->desc[id].ops = &palmas_ops_smps;
+ pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
+ } else {
+ pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
+ pmic->desc[id].ops = &palmas_ops_smps10;
+ pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
+ pmic->desc[id].vsel_mask = SMPS10_VSEL;
+ pmic->desc[id].enable_reg = PALMAS_SMPS10_STATUS;
+ pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
+ }
+
+ pmic->desc[id].type = REGULATOR_VOLTAGE;
+ pmic->desc[id].owner = THIS_MODULE;
+
+ /* Initialise sleep/init values from platform data */
+ if (pdata && pdata->reg_init) {
+ reg_init = pdata->reg_init[id];
+ if (reg_init) {
+ ret = palmas_smps_init(palmas, id, reg_init);
+ if (ret)
+ goto err_unregister_regulator;
+ }
+ }
+
+ /*
+ * read and store the RANGE bit for later use
+ * This must be done before regulator is probed otherwise
+ * we error in probe with unsuportable ranges.
+ */
+ if (id != PALMAS_REG_SMPS10) {
+ addr = palmas_regs_info[id].vsel_addr;
+
+ ret = palmas_smps_read(pmic->palmas, addr, ®);
+ if (ret)
+ goto err_unregister_regulator;
+ if (reg & PALMAS_SMPS12_VOLTAGE_RANGE)
+ pmic->range[id] = 1;
+ }
+
+ if (pdata && pdata->reg_data)
+ config.init_data = pdata->reg_data[id];
+ else
+ config.init_data = NULL;
+
+ rdev = regulator_register(&pmic->desc[id], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ pdev->name);
+ ret = PTR_ERR(rdev);
+ goto err_unregister_regulator;
+ }
+
+ /* Save regulator for cleanup */
+ pmic->rdev[id] = rdev;
+ }
+
+ /* Start this loop from the id left from previous loop */
+ for (; id < PALMAS_NUM_REGS; id++) {
+
+ /* Miss out regulators which are not available due
+ * to alternate functions.
+ */
+
+ /* Register the regulators */
+ pmic->desc[id].name = palmas_regs_info[id].name;
+ pmic->desc[id].id = id;
+ pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES;
+
+ pmic->desc[id].ops = &palmas_ops_ldo;
+
+ pmic->desc[id].type = REGULATOR_VOLTAGE;
+ pmic->desc[id].owner = THIS_MODULE;
+ pmic->desc[id].enable_reg = palmas_regs_info[id].ctrl_addr;
+ pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
+
+ if (pdata && pdata->reg_data)
+ config.init_data = pdata->reg_data[id];
+ else
+ config.init_data = NULL;
+
+ rdev = regulator_register(&pmic->desc[id], &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ pdev->name);
+ ret = PTR_ERR(rdev);
+ goto err_unregister_regulator;
+ }
+
+ /* Save regulator for cleanup */
+ pmic->rdev[id] = rdev;
+
+ /* Initialise sleep/init values from platform data */
+ if (pdata->reg_init) {
+ reg_init = pdata->reg_init[id];
+ if (reg_init) {
+ ret = palmas_ldo_init(palmas, id, reg_init);
+ if (ret)
+ goto err_unregister_regulator;
+ }
+ }
+ }
+
+ return 0;
+
+err_unregister_regulator:
+ while (--id >= 0)
+ regulator_unregister(pmic->rdev[id]);
+ kfree(pmic->rdev);
+ kfree(pmic->desc);
+ kfree(pmic);
+ return ret;
+}
+
+static int __devexit palmas_remove(struct platform_device *pdev)
+{
+ struct palmas_pmic *pmic = platform_get_drvdata(pdev);
+ int id;
+
+ for (id = 0; id < PALMAS_NUM_REGS; id++)
+ regulator_unregister(pmic->rdev[id]);
+
+ kfree(pmic->rdev);
+ kfree(pmic->desc);
+ kfree(pmic);
+ return 0;
+}
+
+static struct platform_driver palmas_driver = {
+ .driver = {
+ .name = "palmas-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = palmas_probe,
+ .remove = __devexit_p(palmas_remove),
+};
+
+static int __init palmas_init(void)
+{
+ return platform_driver_register(&palmas_driver);
+}
+subsys_initcall(palmas_init);
+
+static void __exit palmas_exit(void)
+{
+ platform_driver_unregister(&palmas_driver);
+}
+module_exit(palmas_exit);
+
+MODULE_AUTHOR("Graeme Gregory <gg@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Palmas voltage regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:palmas-pmic");
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index fa5eff6..9cbc642 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -18,9 +18,12 @@
#include <linux/usb/otg.h>
#include <linux/leds.h>
#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
#define PALMAS_NUM_CLIENTS 3
+struct palmas_pmic;
+
struct palmas {
struct device *dev;
@@ -36,12 +39,91 @@ struct palmas {
struct mutex irq_lock;
struct regmap_irq_chip_data *irq_data;
+ /* Child Devices */
+ struct palmas_pmic *pmic;
+
/* GPIO MUXing */
u8 gpio_muxed;
u8 led_muxed;
u8 pwm_muxed;
};
+struct palmas_reg_init {
+ /* warm_rest controls the voltage levels after a warm reset
+ *
+ * 0: reload default values from OTP on warm reset
+ * 1: maintain voltage from VSEL on warm reset
+ */
+ int warm_reset;
+
+ /* roof_floor controls whether the regulator uses the i2c style
+ * of DVS or uses the method where a GPIO or other control method is
+ * attached to the NSLEEP/ENABLE1/ENABLE2 pins
+ *
+ * For SMPS
+ *
+ * 0: i2c selection of voltage
+ * 1: pin selection of voltage.
+ *
+ * For LDO unused
+ */
+ int roof_floor;
+
+ /* sleep_mode is the mode loaded to MODE_SLEEP bits as defined in
+ * the data sheet.
+ *
+ * For SMPS
+ *
+ * 0: Off
+ * 1: AUTO
+ * 2: ECO
+ * 3: Forced PWM
+ *
+ * For LDO
+ *
+ * 0: Off
+ * 1: On
+ */
+ int mode_sleep;
+
+ /* tstep is the timestep loaded to the TSTEP register
+ *
+ * For SMPS
+ *
+ * 0: Jump (no slope control)
+ * 1: 10mV/us
+ * 2: 5mV/us
+ * 3: 2.5mV/us
+ *
+ * For LDO unused
+ */
+ int tstep;
+
+ /* voltage_sel is the bitfield loaded onto the SMPSX_VOLTAGE
+ * register. Set this is the default voltage set in OTP needs
+ * to be overridden.
+ */
+ u8 vsel;
+
+};
+
+struct palmas_pmic_platform_data {
+ /* An array of pointers to regulator init data indexed by regulator
+ * ID
+ */
+ struct regulator_init_data **reg_data;
+
+ /* An array of pointers to structures containing sleep mode and DVS
+ * configuration for regulators indexed by ID
+ */
+ struct palmas_reg_init **reg_init;
+
+ /* use LDO6 for vibrator control */
+ int ldo6_vibrator;
+
+
+};
+
struct palmas_platform_data {
int gpio_base;
@@ -54,6 +136,8 @@ struct palmas_platform_data {
*/
int mux_from_pdata;
u8 pad1, pad2;
+
+ struct palmas_pmic_platform_data *pmic_pdata;
};
/* Define the palmas IRQ numbers */
@@ -98,6 +182,47 @@ enum palmas_irqs {
PALMAS_NUM_IRQ,
};
+enum palmas_regulators {
+ /* SMPS regulators */
+ PALMAS_REG_SMPS12,
+ PALMAS_REG_SMPS123,
+ PALMAS_REG_SMPS3,
+ PALMAS_REG_SMPS45,
+ PALMAS_REG_SMPS457,
+ PALMAS_REG_SMPS6,
+ PALMAS_REG_SMPS7,
+ PALMAS_REG_SMPS8,
+ PALMAS_REG_SMPS9,
+ PALMAS_REG_SMPS10,
+ /* LDO regulators */
+ PALMAS_REG_LDO1,
+ PALMAS_REG_LDO2,
+ PALMAS_REG_LDO3,
+ PALMAS_REG_LDO4,
+ PALMAS_REG_LDO5,
+ PALMAS_REG_LDO6,
+ PALMAS_REG_LDO7,
+ PALMAS_REG_LDO8,
+ PALMAS_REG_LDO9,
+ PALMAS_REG_LDOLN,
+ PALMAS_REG_LDOUSB,
+ /* Total number of regulators */
+ PALMAS_NUM_REGS,
+};
+
+struct palmas_pmic {
+ struct palmas *palmas;
+ struct device *dev;
+ struct regulator_desc desc[PALMAS_NUM_REGS];
+ struct regulator_dev *rdev[PALMAS_NUM_REGS];
+ struct mutex mutex;
+
+ int smps123;
+ int smps457;
+
+ int range[PALMAS_REG_SMPS10];
+};
+
/* defines so we can store the mux settings */
#define PALMAS_GPIO_0_MUXED (1 << 0)
#define PALMAS_GPIO_1_MUXED (1 << 1)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
