* R Sricharan <r.sricharan@xxxxxx> [120503 00:30]:
> --- a/arch/arm/mach-omap2/omap-hotplug.c
> +++ b/arch/arm/mach-omap2/omap-hotplug.c
> @@ -17,8 +17,10 @@
> #include <linux/kernel.h>
> #include <linux/errno.h>
> #include <linux/smp.h>
> +#include <linux/io.h>
>
> #include <asm/cacheflush.h>
> +#include <mach/omap-wakeupgen.h>
>
> #include "common.h"
>
> @@ -35,7 +37,8 @@ int platform_cpu_kill(unsigned int cpu)
> */
> void __ref platform_cpu_die(unsigned int cpu)
> {
> - unsigned int this_cpu;
> + unsigned int boot_cpu = 0;
> + void __iomem *base = omap_get_wakeupgen_base();
>
> flush_cache_all();
> dsb();
> @@ -43,16 +46,27 @@ void __ref platform_cpu_die(unsigned int cpu)
> /*
> * we're ready for shutdown now, so do it
> */
> - if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
> - pr_err("Secure clear status failed\n");
> + if (cpu_is_omap44xx()) {
> + if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0)
> + pr_err("Secure clear status failed\n");
> + } else {
> + __raw_writel(0, base + OMAP_AUX_CORE_BOOT_0);
> + }
> +
>
> for (;;) {
> /*
> * Enter into low power state
> */
> omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF);
> - this_cpu = smp_processor_id();
> - if (omap_read_auxcoreboot0() == this_cpu) {
> +
> + if (cpu_is_omap44xx())
> + boot_cpu = omap_read_auxcoreboot0();
> + else
> + boot_cpu =
> + __raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5;
> +
> + if (boot_cpu == smp_processor_id()) {
> /*
> * OK, proper wakeup, we're done
> */
These should use variables set up during init instead of cpu_is_omapxxx
checks.
> @@ -85,7 +89,11 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
> * the AuxCoreBoot1 register is updated with cpu state
> * A barrier is added to ensure that write buffer is drained
> */
> - omap_modify_auxcoreboot0(0x200, 0xfffffdff);
> + if (cpu_is_omap44xx())
> + omap_modify_auxcoreboot0(0x200, 0xfffffdff);
> + else
> + __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0);
> +
> flush_cache_all();
> smp_wmb();
>
> @@ -124,13 +132,20 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
>
> static void __init wakeup_secondary(void)
> {
> + void __iomem *base = omap_get_wakeupgen_base();
> +
> /*
> * Write the address of secondary startup routine into the
> * AuxCoreBoot1 where ROM code will jump and start executing
> * on secondary core once out of WFE
> * A barrier is added to ensure that write buffer is drained
> */
> - omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
> + if (cpu_is_omap44xx())
> + omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
> + else
> + __raw_writel(virt_to_phys(omap5_secondary_startup),
> + base + OMAP_AUX_CORE_BOOT_1);
> +
> smp_wmb();
>
> /*
Probably these too could be set up during init while at it.
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
