gpmc code has been converted to driver. Modify the board
code to provide gpmc driver with required information.
Signed-off-by: Afzal Mohammed <afzal@xxxxxx>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ae957c9..af7909e 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -73,6 +73,13 @@ enum {
static struct wl12xx_platform_data wl1251_pdata;
static struct tsc2005_platform_data tsc2005_pdata;
+static struct gpmc_device_pdata *gpmc_device_data[2];
+static struct gpmc_device_pdata **gpmc_cur = gpmc_device_data;
+
+static struct gpmc_pdata gpmc_data = {
+ .device_pdata = gpmc_device_data,
+};
+
#if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
.cover_comp_gain = 16,
@@ -1039,7 +1046,11 @@ static void __init board_smc91x_init(void)
omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
- gpmc_smc91x_init(&board_smc91x_data);
+ *gpmc_cur = gpmc_smc91x_init(&board_smc91x_data);
+ if (*gpmc_cur)
+ gpmc_data.num_device++, gpmc_cur++;
+ else
+ pr_err("error: gpmc smsc911x setup\n");
}
#else
@@ -1136,8 +1147,10 @@ void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
regulator_has_full_constraints();
- gpmc_onenand_init(board_onenand_data);
+ *gpmc_cur++ = gpmc_onenand_init(board_onenand_data);
+ gpmc_data.num_device++;
board_smc91x_init();
+ omap_init_gpmc(&gpmc_data);
rx51_add_gpio_keys();
rx51_init_wl1251();
rx51_init_tsc2005();
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
