Vaibhav Hiremath <hvaibhav@xxxxxx> writes: > Current OMAP code supports couple of clocksource options based > on compilation flag (CONFIG_OMAP_32K_TIMER). The 32KHz sync-timer > and a gptimer which can run on 32KHz or system clock (e.g 38.4 MHz). [...] > + > + sync32k_ick = clk_get(NULL, "omap_32ksync_ick"); > + if (!IS_ERR(sync32k_ick)) > + clk_enable(sync32k_ick); > + > + sync32k_cnt_reg = base + OMAP2_32KSYNCNT_CR_OFF; > + > + /* > + * 120000 rough estimate from the calculations in > + * __clocksource_updatefreq_scale. > + */ > + clocks_calc_mult_shift(&persistent_mult, &persistent_shift, > + 32768, NSEC_PER_SEC, 120000); > + > + ret = clocksource_mmio_init(base, "32k_counter", 32768, 250, 32, > + clocksource_mmio_readl_up); After discussing this a bit with Vaibhav offline, we found that 'base' here should be sync32k_cnt_reg. Can you guys that were seeing the hang confirm that that fixes the issue? If so, please reply with your Tested-by. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
