On 04/23/2012 08:12 AM, Tomi Valkeinen wrote:
Actually, I just rephrased the whole description :). I will submit it in v2 of the patch series.On Wed, 2012-03-28 at 16:38 -0600, Ricardo Neri wrote:In order to avoid duplication of definitions. Use the definitions provided by asoundef.h. Furthermore, as CEA-861 and IEC-60958 are used by both DisplayPort and HDMI, this helps to make the code more generic.The first two sentences should probably be just one sentence.
Signed-off-by: Ricardo Neri<ricardo.neri@xxxxxx> --- drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 15 +++--- drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h | 80 ++--------------------------- 2 files changed, 12 insertions(+), 83 deletions(-) diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c index 4740e64..4ab3b19 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c @@ -29,7 +29,6 @@ #include<linux/string.h> #include<linux/seq_file.h> #include<linux/gpio.h> -Unrelated change.
I will remove it.
#include "ti_hdmi_4xxx_ip.h" #include "dss.h" @@ -1156,7 +1155,7 @@ void hdmi_core_audio_config(struct hdmi_ip_data *ip_data, } void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data, - struct hdmi_core_infoframe_audio *info_aud) + struct snd_cea_861_aud_if *info_aud) { u8 val; u8 sum = 0, checksum = 0; @@ -1172,22 +1171,24 @@ void hdmi_core_audio_infoframe_config(struct hdmi_ip_data *ip_data, hdmi_write_reg(av_base, HDMI_CORE_AV_AUDIO_LEN, 0x0a); sum += 0x84 + 0x001 + 0x00a; - val = (info_aud->db1_coding_type<< 4) - | (info_aud->db1_channel_count - 1); + val = (info_aud->coding_type<< CEA861_AUDIO_INFOFRAME_DB1CT_SHIFT) + | (info_aud->channel_count - 1); hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(0), val); sum += val; - val = (info_aud->db2_sample_freq<< 2) | info_aud->db2_sample_size; + val = (info_aud->sample_freq<< CEA861_AUDIO_INFOFRAME_DB2SF_SHIFT) + | (info_aud->sample_size); hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(1), val); sum += val; hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(2), 0x00); - val = info_aud->db4_channel_alloc; + val = info_aud->channel_alloc; hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(3), val); sum += val; - val = (info_aud->db5_downmix_inh<< 7) | (info_aud->db5_lsv<< 3); + val = (info_aud->st_downmix<< CEA861_AUDIO_INFOFRAME_DB5_DM_INH_SHIFT) + | (info_aud->lsv<< CEA861_AUDIO_INFOFRAME_DB5_LSV_SHIFT); hdmi_write_reg(av_base, HDMI_CORE_AV_AUD_DBYTE(4), val); sum += val; diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h index a442998..d6b49b6 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.h @@ -28,6 +28,8 @@ defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE) #include<sound/soc.h> #include<sound/pcm_params.h> +#include<sound/asound.h> +#include<sound/asoundef.h>You don't need to include these in the header file.
I will remove it.
Some are specific to the OMAP4 HDMI IP, such as HDMI_AUDIO_I2S_SDx_EN. Some others refer to generic I2S concepts (such as I2S_SCK_EDGE_FALLING/RISING) but defines are used to configure registers and such configuration may be different in other hardware. The defines that this patch removes are values that are effectively transmitted to the sink and are clearly defined in the relevant standards. Anyways, I will look at it further to see if some of them can be removed as well. Also, the I2S is the same for most of the supported use-cases, if not all of them. Maybe I can remove the unused ones.#endif /* HDMI Wrapper */ @@ -284,35 +286,6 @@ enum hdmi_core_infoframe { HDMI_INFOFRAME_AVI_DB5PR_8 = 7, HDMI_INFOFRAME_AVI_DB5PR_9 = 8, HDMI_INFOFRAME_AVI_DB5PR_10 = 9, - HDMI_INFOFRAME_AUDIO_DB1CT_FROM_STREAM = 0, - HDMI_INFOFRAME_AUDIO_DB1CT_IEC60958 = 1, - HDMI_INFOFRAME_AUDIO_DB1CT_AC3 = 2, - HDMI_INFOFRAME_AUDIO_DB1CT_MPEG1 = 3, - HDMI_INFOFRAME_AUDIO_DB1CT_MP3 = 4, - HDMI_INFOFRAME_AUDIO_DB1CT_MPEG2_MULTICH = 5, - HDMI_INFOFRAME_AUDIO_DB1CT_AAC = 6, - HDMI_INFOFRAME_AUDIO_DB1CT_DTS = 7, - HDMI_INFOFRAME_AUDIO_DB1CT_ATRAC = 8, - HDMI_INFOFRAME_AUDIO_DB1CT_ONEBIT = 9, - HDMI_INFOFRAME_AUDIO_DB1CT_DOLBY_DIGITAL_PLUS = 10, - HDMI_INFOFRAME_AUDIO_DB1CT_DTS_HD = 11, - HDMI_INFOFRAME_AUDIO_DB1CT_MAT = 12, - HDMI_INFOFRAME_AUDIO_DB1CT_DST = 13, - HDMI_INFOFRAME_AUDIO_DB1CT_WMA_PRO = 14, - HDMI_INFOFRAME_AUDIO_DB2SF_FROM_STREAM = 0, - HDMI_INFOFRAME_AUDIO_DB2SF_32000 = 1, - HDMI_INFOFRAME_AUDIO_DB2SF_44100 = 2, - HDMI_INFOFRAME_AUDIO_DB2SF_48000 = 3, - HDMI_INFOFRAME_AUDIO_DB2SF_88200 = 4, - HDMI_INFOFRAME_AUDIO_DB2SF_96000 = 5, - HDMI_INFOFRAME_AUDIO_DB2SF_176400 = 6, - HDMI_INFOFRAME_AUDIO_DB2SF_192000 = 7, - HDMI_INFOFRAME_AUDIO_DB2SS_FROM_STREAM = 0, - HDMI_INFOFRAME_AUDIO_DB2SS_16BIT = 1, - HDMI_INFOFRAME_AUDIO_DB2SS_20BIT = 2, - HDMI_INFOFRAME_AUDIO_DB2SS_24BIT = 3, - HDMI_INFOFRAME_AUDIO_DB5_DM_INH_PERMITTED = 0, - HDMI_INFOFRAME_AUDIO_DB5_DM_INH_PROHIBITED = 1 }; enum hdmi_packing_mode { @@ -322,17 +295,6 @@ enum hdmi_packing_mode { HDMI_PACK_ALREADYPACKED = 7 }; -enum hdmi_core_audio_sample_freq { - HDMI_AUDIO_FS_32000 = 0x3, - HDMI_AUDIO_FS_44100 = 0x0, - HDMI_AUDIO_FS_48000 = 0x2, - HDMI_AUDIO_FS_88200 = 0x8, - HDMI_AUDIO_FS_96000 = 0xA, - HDMI_AUDIO_FS_176400 = 0xC, - HDMI_AUDIO_FS_192000 = 0xE, - HDMI_AUDIO_FS_NOT_INDICATED = 0x1 -}; - enum hdmi_core_audio_layout { HDMI_AUDIO_LAYOUT_2CH = 0, HDMI_AUDIO_LAYOUT_8CH = 1 @@ -393,31 +355,10 @@ enum hdmi_audio_i2s_config {Are the defines left in the hdmi_audio_i2s_config something that are IP specific? Are they even used? I'm just wondering why many of the defines are in sound headers, but some are left here.
HDMI_AUDIO_I2S_LSB_SHIFTED_FIRST = 1, HDMI_AUDIO_I2S_MAX_WORD_20BITS = 0, HDMI_AUDIO_I2S_MAX_WORD_24BITS = 1, - HDMI_AUDIO_I2S_CHST_WORD_NOT_SPECIFIED = 0, - HDMI_AUDIO_I2S_CHST_WORD_16_BITS = 1, - HDMI_AUDIO_I2S_CHST_WORD_17_BITS = 6, - HDMI_AUDIO_I2S_CHST_WORD_18_BITS = 2, - HDMI_AUDIO_I2S_CHST_WORD_19_BITS = 4, - HDMI_AUDIO_I2S_CHST_WORD_20_BITS_20MAX = 5, - HDMI_AUDIO_I2S_CHST_WORD_20_BITS_24MAX = 1, - HDMI_AUDIO_I2S_CHST_WORD_21_BITS = 6, - HDMI_AUDIO_I2S_CHST_WORD_22_BITS = 2, - HDMI_AUDIO_I2S_CHST_WORD_23_BITS = 4, - HDMI_AUDIO_I2S_CHST_WORD_24_BITS = 5, HDMI_AUDIO_I2S_SCK_EDGE_FALLING = 0, HDMI_AUDIO_I2S_SCK_EDGE_RISING = 1, HDMI_AUDIO_I2S_VBIT_FOR_PCM = 0, HDMI_AUDIO_I2S_VBIT_FOR_COMPRESSED = 1, - HDMI_AUDIO_I2S_INPUT_LENGTH_NA = 0, - HDMI_AUDIO_I2S_INPUT_LENGTH_16 = 2, - HDMI_AUDIO_I2S_INPUT_LENGTH_17 = 12, - HDMI_AUDIO_I2S_INPUT_LENGTH_18 = 4, - HDMI_AUDIO_I2S_INPUT_LENGTH_19 = 8, - HDMI_AUDIO_I2S_INPUT_LENGTH_20 = 10, - HDMI_AUDIO_I2S_INPUT_LENGTH_21 = 13, - HDMI_AUDIO_I2S_INPUT_LENGTH_22 = 5, - HDMI_AUDIO_I2S_INPUT_LENGTH_23 = 9, - HDMI_AUDIO_I2S_INPUT_LENGTH_24 = 11, HDMI_AUDIO_I2S_FIRST_BIT_SHIFT = 0, HDMI_AUDIO_I2S_FIRST_BIT_NO_SHIFT = 1, HDMI_AUDIO_I2S_SD0_EN = 1, @@ -486,19 +427,6 @@ struct hdmi_core_infoframe_avi { /* Pixel number start of right bar */ u16 db12_13_pixel_sofright; }; -/* - * Refer to section 8.2 in HDMI 1.3 specification for - * details about infoframe databytes - */ -struct hdmi_core_infoframe_audio { - u8 db1_coding_type; - u8 db1_channel_count; - u8 db2_sample_freq; - u8 db2_sample_size; - u8 db4_channel_alloc; - bool db5_downmix_inh; - u8 db5_lsv; /* Level shift values for downmix */ -}; struct hdmi_core_packet_enable_repeat { u32 audio_pkt; @@ -559,7 +487,7 @@ struct hdmi_core_audio_i2s_config { struct hdmi_core_audio_config { struct hdmi_core_audio_i2s_config i2s_cfg; - enum hdmi_core_audio_sample_freq freq_sample; + u32 freq_sample;Try to keep consistent code formatting. If the original code indents the field names, indent your field name also.
I will fix the indentation. BR, Ricardo
Tomi
-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
