[PATCH] tty: omap-serial: configure wakeup mechanism based on port usage.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Govindraj.R" <govindraj.raja@xxxxxx>

With set_wakeup port ops availability from serial_core layer
which will be called when port is opened with state as true
indicating the wakeups can be enabled for this port and state
as false while port shutdown where we can disable the wakeups.

But wakeup can be also enabled/disabled when requested from sysfs.
If disabled wakeup will be disabled while entering suspend and be
enabled back based on pm state while resuming.

Thanks to Kevin Hilman <khilman@xxxxxx> for suggesting this.
Discussion References:
http://www.spinics.net/lists/linux-omap/msg67764.html
http://www.spinics.net/lists/linux-omap/msg67838.html

Cc: Paul Walmsley <paul@xxxxxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxx>
[suggestion and modification to enable and disable wakeup
capability based on port usage]
Signed-off-by: Govindraj.R <govindraj.raja@xxxxxx>
---

Patch is tested using the patch as in here[1]
Tested on beagle-XM by enabling and disabling wakeups
from sysfs and opening and closing a uart port.

[1]: http://marc.info/?l=linux-omap&m=133518614022144&w=2


 arch/arm/plat-omap/include/plat/omap-serial.h |    1 -
 drivers/tty/serial/omap-serial.c              |   45 +++++++++++++++----------
 2 files changed, 27 insertions(+), 19 deletions(-)

diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 9ff4444..8e6d734 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -130,7 +130,6 @@ struct uart_omap_port {
 	unsigned long		port_activity;
 	u32			context_loss_cnt;
 	u32			errata;
-	u8			wakeups_enabled;
 
 	struct pm_qos_request	pm_qos_request;
 	u32			latency;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d00b38e..b8f328e 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -525,6 +525,7 @@ static int serial_omap_startup(struct uart_port *port)
 	dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
 
 	pm_runtime_get_sync(&up->pdev->dev);
+
 	/*
 	 * Clear the FIFO buffers and disable them.
 	 * (they will be reenabled in set_termios())
@@ -910,11 +911,27 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
 }
 
+static int serial_omap_set_wake(struct uart_port *port, unsigned int state)
+{
+	struct uart_omap_port *up = (struct uart_omap_port *)port;
+	struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
+	u8 enable_wakeup = false;
+
+	if (state)
+		enable_wakeup = true;
+
+	if (pdata->enable_wakeup)
+		pdata->enable_wakeup(up->pdev, enable_wakeup);
+
+	return 0;
+}
+
 static void
 serial_omap_pm(struct uart_port *port, unsigned int state,
 	       unsigned int oldstate)
 {
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
+	struct omap_uart_port_info *pdata = up->pdev->dev.platform_data;
 	unsigned char efr;
 
 	dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line);
@@ -930,12 +947,8 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 	serial_out(up, UART_EFR, efr);
 	serial_out(up, UART_LCR, 0);
 
-	if (!device_may_wakeup(&up->pdev->dev)) {
-		if (!state)
-			pm_runtime_forbid(&up->pdev->dev);
-		else
-			pm_runtime_allow(&up->pdev->dev);
-	}
+	if (!state && pdata->enable_wakeup)
+		pdata->enable_wakeup(up->pdev, true);
 
 	pm_runtime_put(&up->pdev->dev);
 }
@@ -1161,6 +1174,7 @@ static struct uart_ops serial_omap_pops = {
 	.shutdown	= serial_omap_shutdown,
 	.set_termios	= serial_omap_set_termios,
 	.pm		= serial_omap_pm,
+	.set_wake	= serial_omap_set_wake,
 	.type		= serial_omap_type,
 	.release_port	= serial_omap_release_port,
 	.request_port	= serial_omap_request_port,
@@ -1184,10 +1198,14 @@ static struct uart_driver serial_omap_reg = {
 static int serial_omap_suspend(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
+	struct omap_uart_port_info *pdata = dev->platform_data;
 
 	if (up) {
 		uart_suspend_port(&serial_omap_reg, &up->port);
 		flush_work_sync(&up->qos_work);
+
+		if (!device_may_wakeup(dev))
+			pdata->enable_wakeup(up->pdev, false);
 	}
 
 	return 0;
@@ -1476,6 +1494,9 @@ static int serial_omap_probe(struct platform_device *pdev)
 	if (ret != 0)
 		goto err_add_port;
 
+	if (omap_up_info->enable_wakeup)
+		omap_up_info->enable_wakeup(pdev, false);
+
 	pm_runtime_put(&pdev->dev);
 	platform_set_drvdata(pdev, up);
 	return 0;
@@ -1582,18 +1603,6 @@ static int serial_omap_runtime_suspend(struct device *dev)
 	if (pdata->get_context_loss_count)
 		up->context_loss_cnt = pdata->get_context_loss_count(dev);
 
-	if (device_may_wakeup(dev)) {
-		if (!up->wakeups_enabled) {
-			pdata->enable_wakeup(up->pdev, true);
-			up->wakeups_enabled = true;
-		}
-	} else {
-		if (up->wakeups_enabled) {
-			pdata->enable_wakeup(up->pdev, false);
-			up->wakeups_enabled = false;
-		}
-	}
-
 	/* Errata i291 */
 	if (up->use_dma && pdata->set_forceidle &&
 			(up->errata & UART_ERRATA_i291_DMA_FORCEIDLE))
-- 
1.7.9

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux