From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
The SAR RAM is maintained during Device OFF mode. The register layout
is fixed in SAR ROM. SAR is split into 4 banks with different
privilege accesses based on device type
---------------------------------------------------------------
Access mode Bank Address Range
---------------------------------------------------------------
HS/GP : Public 1 0x4A32_6000 - 0x4A32_6FFF (4kB)
HS/GP : Public 2 0x4A32_7000 - 0x4A32_73FF (1kB)
HS/EMU : Secured
GP : Public 3 0x4A32_8000 - 0x4A32_87FF (2kB)
HS/GP :Secure
write once. 4 0x4A32_9000 - 0x4A32_93FF (1kB)
---------------------------------------------------------------
The save process is done entirely by software and restore is done by
hardware using the auto-restore feature. The restore feature is enabled
by default and cannot be disabled. The software must save the data
to be restored in a dedicated location in SAR RAM.
[with contributions for 4460, cleanups from:
Rajeev Kulkarni <rajeevk@xxxxxx>
Nishanth Menon <nm@xxxxxx>
Axel Haslam <axelhaslam@xxxxxxxxx>
Avinash.H.M <avinashhm@xxxxxx>]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
[t-kristo@xxxxxx: dropped huge data tables as they are no longer needed
with subsequent patches that generate the layouts based on SAR ROM
contents, also dropped unnecessary dmm-44xx.h header file.]
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
arch/arm/mach-omap2/Makefile | 2 +-
arch/arm/mach-omap2/cm1_44xx.h | 2 +
arch/arm/mach-omap2/cm2_44xx.h | 2 +
arch/arm/mach-omap2/omap-sar.c | 341 ++++++++++++++++++++++++++++
arch/arm/mach-omap2/omap4-common.c | 28 ---
arch/arm/mach-omap2/omap4-sar-layout.h | 50 ++++
arch/arm/mach-omap2/pm.h | 12 +
arch/arm/plat-omap/include/plat/omap44xx.h | 5 +
8 files changed, 413 insertions(+), 29 deletions(-)
create mode 100644 arch/arm/mach-omap2/omap-sar.c
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 49f92bc..a978679 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
obj-$(CONFIG_ARCH_OMAP4) += omap4-common.o omap-wakeupgen.o \
- sleep44xx.o
+ sleep44xx.o omap-sar.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-omap2/cm1_44xx.h b/arch/arm/mach-omap2/cm1_44xx.h
index 1bc00dc..c21b660 100644
--- a/arch/arm/mach-omap2/cm1_44xx.h
+++ b/arch/arm/mach-omap2/cm1_44xx.h
@@ -218,8 +218,10 @@
#define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0088)
/* Function prototypes */
+#ifndef __ASSEMBLER__
extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+#endif
#endif
diff --git a/arch/arm/mach-omap2/cm2_44xx.h b/arch/arm/mach-omap2/cm2_44xx.h
index b9de72d..3e8871e 100644
--- a/arch/arm/mach-omap2/cm2_44xx.h
+++ b/arch/arm/mach-omap2/cm2_44xx.h
@@ -450,8 +450,10 @@
#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0020)
/* Function prototypes */
+#ifndef __ASSEMBLER__
extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);
extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+#endif
#endif
diff --git a/arch/arm/mach-omap2/omap-sar.c b/arch/arm/mach-omap2/omap-sar.c
new file mode 100644
index 0000000..74e0207
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-sar.c
@@ -0,0 +1,341 @@
+/*
+ * OMAP4 Save Restore source file
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Written by Santosh Shilimkar <santosh.shilimkar@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include "iomap.h"
+#include "pm.h"
+#include "clockdomain.h"
+
+#include "omap4-sar-layout.h"
+#include "cm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "cminst44xx.h"
+
+static void __iomem *sar_ram_base;
+static void __iomem *omap4_sar_modules[MAX_SAR_MODULES];
+static struct powerdomain *l3init_pwrdm;
+ static struct clockdomain *l3init_clkdm;
+static struct clk *usb_host_ck, *usb_tll_ck;
+
+/*
+ * SAR_RAM1 register layout consist of EMIF1, EMIF2, CM1, CM2,
+ * CONTROL_CORE efuse, DMM and USB TLL registers.
+ * The layout is arranged is a two dimentional array like
+ * below,
+ * const u32 sar_ramX_layout[nb_regs_sets][4] = {
+ * {module_index, reg_offset, size, sar_ram_offset},
+ * }
+ */
+static const u32 omap443x_sar_ram1_layout[][4] = {
+};
+
+/*
+ * SAR_RAM2 register layout consist of SYSCTRL_PADCONF_CORE regsiters
+ */
+static const u32 omap443x_sar_ram2_layout[][4] = {
+};
+
+/*
+ * SAR_RAM3 and SAR_RAM4 layout is not listed since moslty it's handle by
+ * secure software.
+ */
+static const u32 omap443x_sar_ram3_layout[][4] = {
+};
+
+/*
+ * omap_sar_save :
+ * common routine to save the registers to SAR RAM with the
+ * given parameters
+ * @nb_regs - Number of registers to saved
+ * @sar_bank_offset - where to backup
+ * @sar_layout - constant table containing the backup info
+ */
+static void sar_save(u32 nb_regs, u32 sar_bank, const u32 sar_layout_table[][4])
+{
+ u32 reg_val, size, i, j;
+ void __iomem *reg_read_addr, *sar_wr_addr;
+
+ for (i = 0; i < nb_regs; i++) {
+ if (omap4_sar_modules[(sar_layout_table[i][MODULE_ADDR_IDX])]) {
+ size = sar_layout_table[i][MODULE_NB_REGS_IDX];
+ reg_read_addr =
+ omap4_sar_modules[sar_layout_table[i]
+ [MODULE_ADDR_IDX]]
+ + sar_layout_table[i][MODULE_OFFSET_IDX];
+ sar_wr_addr = sar_ram_base + sar_bank +
+ sar_layout_table[i][SAR_RAM_OFFSET_IDX];
+ for (j = 0; j < size; j++) {
+ reg_val = __raw_readl(reg_read_addr + j * 4);
+ __raw_writel(reg_val, sar_wr_addr + j * 4);
+ }
+ }
+ }
+}
+
+static void save_sar_bank3(void)
+{
+ struct clockdomain *l4_secure_clkdm;
+
+ /*
+ * Not supported on ES1.0 silicon
+ */
+ if (omap_rev() == OMAP4430_REV_ES1_0) {
+ WARN_ONCE(1, "omap4: SAR backup not supported on ES1.0 ..\n");
+ return;
+ }
+
+ l4_secure_clkdm = clkdm_lookup("l4_secure_clkdm");
+ clkdm_wakeup(l4_secure_clkdm);
+
+ sar_save(ARRAY_SIZE(omap443x_sar_ram3_layout), SAR_BANK3_OFFSET,
+ omap443x_sar_ram3_layout);
+
+ clkdm_allow_idle(l4_secure_clkdm);
+}
+
+static int omap4_sar_not_accessible(void)
+{
+ u32 usbhost_state, usbtll_state;
+
+ /*
+ * Make sure that USB host and TLL modules are not
+ * enabled before attempting to save the context
+ * registers, otherwise this will trigger an exception.
+ */
+ usbhost_state = omap4_cminst_read_inst_reg(OMAP4430_CM2_PARTITION,
+ OMAP4430_CM2_L3INIT_INST,
+ OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET)
+ & (OMAP4430_STBYST_MASK | OMAP4430_IDLEST_MASK);
+
+ usbtll_state = omap4_cminst_read_inst_reg(OMAP4430_CM2_PARTITION,
+ OMAP4430_CM2_L3INIT_INST,
+ OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET)
+ & OMAP4430_IDLEST_MASK;
+
+ if ((usbhost_state == (OMAP4430_STBYST_MASK | OMAP4430_IDLEST_MASK)) &&
+ (usbtll_state == (OMAP4430_IDLEST_MASK)))
+ return 0;
+ else
+ return -EBUSY;
+}
+
+ /*
+ * omap4_sar_save -
+ * Save the context to SAR_RAM1 and SAR_RAM2 as per
+ * omap4xxx_sar_ram1_layout and omap4xxx_sar_ram2_layout for the device OFF
+ * mode
+ */
+int omap4_sar_save(void)
+{
+ /*
+ * Not supported on ES1.0 silicon
+ */
+ if (omap_rev() == OMAP4430_REV_ES1_0) {
+ WARN_ONCE(1, "omap4: SAR backup not supported on ES1.0 ..\n");
+ return -ENODEV;
+ }
+
+ if (omap4_sar_not_accessible()) {
+ pr_debug("%s: USB SAR CNTX registers are not accessible!\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ /*
+ * SAR bits and clocks needs to be enabled
+ */
+ clkdm_wakeup(l3init_clkdm);
+ pwrdm_enable_hdwr_sar(l3init_pwrdm);
+ clk_enable(usb_host_ck);
+ clk_enable(usb_tll_ck);
+
+ /* Save SAR BANK1 */
+ sar_save(ARRAY_SIZE(omap443x_sar_ram1_layout), SAR_BANK1_OFFSET,
+ omap443x_sar_ram1_layout);
+
+ clk_disable(usb_host_ck);
+ clk_disable(usb_tll_ck);
+ pwrdm_disable_hdwr_sar(l3init_pwrdm);
+ clkdm_allow_idle(l3init_clkdm);
+
+ /* Save SAR BANK2 */
+ sar_save(ARRAY_SIZE(omap443x_sar_ram2_layout), SAR_BANK2_OFFSET,
+ omap443x_sar_ram2_layout);
+
+ return 0;
+}
+
+/**
+ * omap4_sar_overwrite :
+ * This API overwrite some of the SAR locations as a special cases
+ * The register content to be saved can be the register value before
+ * going into OFF-mode or a value that is required on wake up. This means
+ * that the restored register value can be different from the last value
+ * of the register before going into OFF-mode
+ * - CM1 and CM2 configuration
+ * Bits 0 of the CM_SHADOW_FREQ_CONFIG1 regiser and the
+ * CM_SHADOW_FREQ_CONFIG2 register are self-clearing and must
+ * be set at restore time. Thus, these data must always be
+ * overwritten in the SAR RAM.
+ * - Because USBHOSTHS and USBTLL restore needs a particular
+ * sequencing, the software must overwrite data read from
+ * the following registers implied in phase2a and phase 2b
+ */
+void omap4_sar_overwrite(void)
+{
+ u32 val = 0;
+ u32 offset = 0;
+
+ if (cpu_is_omap446x())
+ offset = 0x04;
+
+ /* Overwriting Phase1 data to be restored */
+ /* CM2 MEMIF_CLKTRCTRL = SW_WKUP, before FREQ UPDATE */
+ __raw_writel(0x2, sar_ram_base + SAR_BANK1_OFFSET + 0xd0);
+ /* CM1 CM_SHADOW_FREQ_CONFIG2, Enable FREQ UPDATE */
+ val = __raw_readl(OMAP4430_CM_SHADOW_FREQ_CONFIG2);
+ /*
+ * FIXME: Implement FREQ UPDATE for L#/M5 before enabling this
+ * val |= 1 << OMAP4430_FREQ_UPDATE_SHIFT;
+ */
+ __raw_writel(val, sar_ram_base + SAR_BANK1_OFFSET + 0x100);
+ /* CM1 CM_SHADOW_FREQ_CONFIG1, Enable FREQ UPDATE */
+ val = __raw_readl(OMAP4430_CM_SHADOW_FREQ_CONFIG1);
+ val |= 1 << OMAP4430_FREQ_UPDATE_SHIFT;
+ val &= ~OMAP4430_DLL_OVERRIDE_MASK;
+ __raw_writel(val, sar_ram_base + SAR_BANK1_OFFSET + 0x104);
+ /* CM2 MEMIF_CLKTRCTRL = HW_AUTO, after FREQ UPDATE */
+ __raw_writel(0x3, sar_ram_base + SAR_BANK1_OFFSET + 0x124);
+
+ /* Overwriting Phase2a data to be restored */
+ /* CM_L3INIT_USB_HOST_CLKCTRL: SAR_MODE = 1, MODULEMODE = 2 */
+ __raw_writel(0x00000012,
+ sar_ram_base + SAR_BANK1_OFFSET + 0x2ec + offset);
+ /* CM_L3INIT_USB_TLL_CLKCTRL: SAR_MODE = 1, MODULEMODE = 1 */
+ __raw_writel(0x00000011,
+ sar_ram_base + SAR_BANK1_OFFSET + 0x2f0 + offset);
+ /* CM2 CM_SDMA_STATICDEP : Enable static depedency for SAR modules */
+ __raw_writel(0x000090e8,
+ sar_ram_base + SAR_BANK1_OFFSET + 0x2f4 + offset);
+
+ /* Overwriting Phase2b data to be restored */
+ /* CM_L3INIT_USB_HOST_CLKCTRL: SAR_MODE = 0, MODULEMODE = 0 */
+ val = __raw_readl(OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL);
+ val &= (OMAP4430_CLKSEL_UTMI_P1_MASK | OMAP4430_CLKSEL_UTMI_P2_MASK);
+ __raw_writel(val, sar_ram_base + SAR_BANK1_OFFSET + 0x91c + offset);
+ /* CM_L3INIT_USB_TLL_CLKCTRL: SAR_MODE = 0, MODULEMODE = 0 */
+ __raw_writel(0x0000000,
+ sar_ram_base + SAR_BANK1_OFFSET + 0x920 + offset);
+ /* CM2 CM_SDMA_STATICDEP : Clear the static depedency */
+ __raw_writel(0x00000040,
+ sar_ram_base + SAR_BANK1_OFFSET + 0x924 + offset);
+
+ /* readback to ensure data reaches to SAR RAM */
+ barrier();
+ val = __raw_readl(sar_ram_base + SAR_BANK1_OFFSET + 0x924 + offset);
+}
+
+void __iomem *omap4_get_sar_ram_base(void)
+{
+ return sar_ram_base;
+}
+
+/*
+ * SAR RAM used to save and restore the HW
+ * context in low power modes
+ */
+static int __init omap4_sar_ram_init(void)
+{
+ /*
+ * To avoid code running on other OMAPs in
+ * multi-omap builds
+ */
+ if (!cpu_is_omap44xx())
+ return -ENODEV;
+
+ /*
+ * Static mapping, never released Actual SAR area used is 8K it's
+ * spaced over 16K address with some part is reserved.
+ */
+ sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
+ BUG_ON(!sar_ram_base);
+
+ /*
+ * All these are static mappings so ioremap() will
+ * just return with mapped VA
+ */
+ omap4_sar_modules[EMIF1_INDEX] = ioremap(OMAP44XX_EMIF1_BASE, SZ_1M);
+ BUG_ON(!omap4_sar_modules[EMIF1_INDEX]);
+ omap4_sar_modules[EMIF2_INDEX] = ioremap(OMAP44XX_EMIF2_BASE, SZ_1M);
+ BUG_ON(!omap4_sar_modules[EMIF2_INDEX]);
+ omap4_sar_modules[DMM_INDEX] = ioremap(OMAP44XX_DMM_BASE, SZ_1M);
+ BUG_ON(!omap4_sar_modules[DMM_INDEX]);
+ omap4_sar_modules[CM1_INDEX] = ioremap(OMAP4430_CM1_BASE, SZ_8K);
+ BUG_ON(!omap4_sar_modules[CM1_INDEX]);
+ omap4_sar_modules[CM2_INDEX] = ioremap(OMAP4430_CM2_BASE, SZ_8K);
+ BUG_ON(!omap4_sar_modules[CM2_INDEX]);
+ omap4_sar_modules[C2C_INDEX] = ioremap(OMAP44XX_C2C_BASE, SZ_1M);
+ BUG_ON(!omap4_sar_modules[C2C_INDEX]);
+ omap4_sar_modules[CTRL_MODULE_PAD_CORE_INDEX] =
+ ioremap(OMAP443X_CTRL_BASE, SZ_4K);
+ BUG_ON(!omap4_sar_modules[CTRL_MODULE_PAD_CORE_INDEX]);
+ omap4_sar_modules[L3_CLK1_INDEX] = ioremap(L3_44XX_BASE_CLK1, SZ_1M);
+ BUG_ON(!omap4_sar_modules[L3_CLK1_INDEX]);
+ omap4_sar_modules[L3_CLK2_INDEX] = ioremap(L3_44XX_BASE_CLK2, SZ_1M);
+ BUG_ON(!omap4_sar_modules[L3_CLK2_INDEX]);
+ omap4_sar_modules[L3_CLK3_INDEX] = ioremap(L3_44XX_BASE_CLK3, SZ_1M);
+ BUG_ON(!omap4_sar_modules[L3_CLK3_INDEX]);
+ omap4_sar_modules[USBTLL_INDEX] = ioremap(OMAP44XX_USBTLL_BASE, SZ_1M);
+ BUG_ON(!omap4_sar_modules[USBTLL_INDEX]);
+ omap4_sar_modules[UHH_INDEX] = ioremap(OMAP44XX_UHH_CONFIG_BASE, SZ_1M);
+ BUG_ON(!omap4_sar_modules[UHH_INDEX]);
+ omap4_sar_modules[L4CORE_INDEX] = ioremap(L4_44XX_PHYS, SZ_4M);
+ BUG_ON(!omap4_sar_modules[L4CORE_INDEX]);
+ omap4_sar_modules[L4PER_INDEX] = ioremap(L4_PER_44XX_PHYS, SZ_4M);
+ BUG_ON(!omap4_sar_modules[L4PER_INDEX]);
+
+ /*
+ * SAR BANK3 contains all firewall settings and it's saved through
+ * secure API on HS device. On GP device these registers are
+ * meaningless but still needs to be saved. Otherwise Auto-restore
+ * phase DMA takes an abort. Hence save these conents only once
+ * in init to avoid the issue while waking up from device OFF
+ */
+ if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+ save_sar_bank3();
+
+ /*
+ * L3INIT PD and clocks are needed for SAR save phase
+ */
+ l3init_pwrdm = pwrdm_lookup("l3init_pwrdm");
+ if (!l3init_pwrdm)
+ pr_err("Failed to get l3init_pwrdm\n");
+
+ l3init_clkdm = clkdm_lookup("l3_init_clkdm");
+ if (!l3init_clkdm)
+ pr_err("Failed to get l3_init_clkdm\n");
+
+ usb_host_ck = clk_get_sys("usbhs_omap", "hs_fck");
+ if (IS_ERR(usb_host_ck))
+ pr_err("Could not get usb_host_ck\n");
+
+ usb_tll_ck = clk_get_sys("usbhs_omap", "usbtll_ick");
+ if (IS_ERR(usb_tll_ck))
+ pr_err("Could not get usb_tll_ck\n");
+
+ return 0;
+}
+early_initcall(omap4_sar_ram_init);
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index cc6a915..7ea4652 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -37,7 +37,6 @@
static void __iomem *l2cache_base;
#endif
-static void __iomem *sar_ram_base;
static void __iomem *gic_dist_base_addr;
#ifdef CONFIG_OMAP4_ERRATA_I688
@@ -186,30 +185,3 @@ static int __init omap_l2_cache_init(void)
}
early_initcall(omap_l2_cache_init);
#endif
-
-void __iomem *omap4_get_sar_ram_base(void)
-{
- return sar_ram_base;
-}
-
-/*
- * SAR RAM used to save and restore the HW
- * context in low power modes
- */
-static int __init omap4_sar_ram_init(void)
-{
- /*
- * To avoid code running on other OMAPs in
- * multi-omap builds
- */
- if (!cpu_is_omap44xx())
- return -ENOMEM;
-
- /* Static mapping, never released */
- sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
- if (WARN_ON(!sar_ram_base))
- return -ENOMEM;
-
- return 0;
-}
-early_initcall(omap4_sar_ram_init);
diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h b/arch/arm/mach-omap2/omap4-sar-layout.h
index fe5b545..eef2839 100644
--- a/arch/arm/mach-omap2/omap4-sar-layout.h
+++ b/arch/arm/mach-omap2/omap4-sar-layout.h
@@ -11,6 +11,56 @@
#ifndef OMAP_ARCH_OMAP4_SAR_LAYOUT_H
#define OMAP_ARCH_OMAP4_SAR_LAYOUT_H
+#include <mach/hardware.h>
+#include <mach/ctrl_module_pad_core_44xx.h>
+
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
+#include "prcm-common.h"
+
+/*
+ * The SAR RAM is maintained during Device OFF mode.
+ * It is split into 4 banks with different privilege accesses
+ *
+ * ---------------------------------------------------------------------
+ * Access mode Bank Address Range
+ * ---------------------------------------------------------------------
+ * HS/GP : Public 1 0x4A32_6000 - 0x4A32_6FFF (4kB)
+ * HS/GP : Public, Secured
+ * if padconfaccdisable=1 2 0x4A32_7000 - 0x4A32_73FF (1kB)
+ * HS/EMU : Secured
+ * GP : Public 3 0x4A32_8000 - 0x4A32_87FF (2kB)
+ * HS/GP :
+ * Secure Priviledge,
+ * write once. 4 0x4A32_9000 - 0x4A32_93FF (1kB)
+ * ---------------------------------------------------------------------
+ * The SAR RAM save regiter layout is fixed since restore is done by hardware.
+ */
+
+#define MODULE_ADDR_IDX 0
+#define MODULE_OFFSET_IDX 1
+#define MODULE_NB_REGS_IDX 2
+#define SAR_RAM_OFFSET_IDX 3
+
+/*
+ * Module Index used to lookup VA using index
+ */
+#define MAX_SAR_MODULES 14
+#define EMIF1_INDEX 0
+#define EMIF2_INDEX 1
+#define DMM_INDEX 2
+#define CM1_INDEX 3
+#define CM2_INDEX 4
+#define C2C_INDEX 5
+#define CTRL_MODULE_PAD_CORE_INDEX 6
+#define L3_CLK1_INDEX 7
+#define L3_CLK2_INDEX 8
+#define L3_CLK3_INDEX 9
+#define USBTLL_INDEX 10
+#define UHH_INDEX 11
+#define L4CORE_INDEX 12
+#define L4PER_INDEX 13
+
/*
* SAR BANK offsets from base address OMAP44XX_SAR_RAM_BASE
*/
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 07ad800..c13e3c1 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -138,4 +138,16 @@ static inline int omap4_twl_init(void)
}
#endif
+#ifdef CONFIG_PM
+extern int omap4_sar_save(void);
+extern void omap4_sar_overwrite(void);
+#else
+static inline void omap4_sar_save(void)
+{
+}
+static inline void omap4_sar_overwrite(void)
+{
+}
+#endif
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index 1a45700..8e83e16 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -22,6 +22,9 @@
#define L4_PER_44XX_BASE 0x48000000
#define L4_EMU_44XX_BASE 0x54000000
#define L3_44XX_BASE 0x44000000
+#define L3_44XX_BASE_CLK1 L3_44XX_BASE
+#define L3_44XX_BASE_CLK2 0x44800000
+#define L3_44XX_BASE_CLK3 0x45000000
#define OMAP44XX_EMIF1_BASE 0x4c000000
#define OMAP44XX_EMIF2_BASE 0x4d000000
#define OMAP44XX_DMM_BASE 0x4e000000
@@ -59,5 +62,7 @@
#define OMAP44XX_HSUSB_OHCI_BASE (L4_44XX_BASE + 0x64800)
#define OMAP44XX_HSUSB_EHCI_BASE (L4_44XX_BASE + 0x64C00)
+#define OMAP44XX_C2C_BASE 0x5c000000
+
#endif /* __ASM_ARCH_OMAP44XX_H */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
