An overlay manager's timings (the manager size, and blanking parameters if an
LCD manager) are DISPC shadow registers, and they should hence follow the
correct programming model.
This set makes the timings a manager_info parameter. The interface drivers now
set the timings in manager_info instead of directly writing to registers.
This change also prevents the need to use display resolution for overlay
checks, hence making some of the APPLY functions less dependent on the display.
These patches apply over:
git://gitorious.org/linux-omap-dss2/linux.git dev
Archit Taneja (6):
OMAPDSS: DISPC/RFBI: Use dispc_mgr_set_lcd_timings() for setting lcd
size
OMAPDSS: DISPC: Use a common function to set manager timings
OMAPDSS: DISPC: Clean up manager timing/size functions
OMAPDSS: MANAGER: Make DISPC timings a manager_info parameter
OMAPDSS: MANAGER: Check validity of manager timings
OMAPDSS: APPLY: Remove display dependency from overlay and manager
checks
drivers/video/omap2/dss/apply.c | 46 +++++++++++++-----
drivers/video/omap2/dss/dispc.c | 78 +++++++++++++++++++-------------
drivers/video/omap2/dss/dpi.c | 6 ++-
drivers/video/omap2/dss/dsi.c | 11 ++++-
drivers/video/omap2/dss/dss.h | 16 +++---
drivers/video/omap2/dss/dss_features.c | 6 +++
drivers/video/omap2/dss/dss_features.h | 2 +
drivers/video/omap2/dss/hdmi.c | 6 ++-
drivers/video/omap2/dss/manager.c | 39 +++++++++++++++-
drivers/video/omap2/dss/overlay.c | 20 ++++-----
drivers/video/omap2/dss/rfbi.c | 27 ++++++++++-
drivers/video/omap2/dss/sdi.c | 5 ++-
drivers/video/omap2/dss/venc.c | 17 +++++---
include/video/omapdss.h | 2 +
14 files changed, 200 insertions(+), 81 deletions(-)
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
