Re: [PATCH 07/12] arm: omap3: am35x: Set proper powerdomain states

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi

On Wed, 11 Apr 2012, Mark A. Greer wrote:

> From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
> 
> The am35x family of SoCs only support PWRSTS_ON
> and PWRSTS_INACTIVE states so create a new set
> of powerdomain structures that ensure that only
> the ON and INACTIVE states are entered.

I'm still unsure what we should do about this INACTIVE state.  As far as I 
can tell, it does not actually represent a distinct powerdomain state on 
OMAP3.  We can't write it to the PM_PWSTCTRL_*.POWERSTATE bits, since that 
value is marked as "reserved".  And SPRUGR0B, the AM3517/3505 TRM, 
explicitly states "This register should not be programmed with reserved 
values of bit fields for proper functioning of power state control."
Of course SPRUGR0B also claims that AM3517/3505 supports RETENTION, so 
that is relatively confusing.

OMAP4 PRCM actually does seem to support powerdomain INACTIVE state, 
although it does not actually seem to represent a separate state.  As I 
understand it, it simply allows the clockdomains in the powerdomain to 
transitioning from the ACTIVE state into the INACTIVE state.  In other 
words, it doesn't affect the powerdomain power state at all.  And on OMAP4 
it's referred to as the ON-INACTIVE state, to clarify that it is simply a 
variant of the ON state.  I wish they had just added a separate bit for 
this; it would have avoided some frustration...

Anyway, my question is this: is there any point at all to defining the 
INACTIVE state for 3517/3505, given that it apparently cannot be read 
from, nor written to the PRCM hardware?

> 
> Signed-off-by: Mark A. Greer <mgreer@xxxxxxxxxxxxxxx>
> ---
>  arch/arm/mach-omap2/powerdomain.h           |    1 +
>  arch/arm/mach-omap2/powerdomains3xxx_data.c |  134 ++++++++++++++++++++++++---
>  2 files changed, 123 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
> index 0d72a8a..561cb27 100644
> --- a/arch/arm/mach-omap2/powerdomain.h
> +++ b/arch/arm/mach-omap2/powerdomain.h
> @@ -43,6 +43,7 @@
>  #define PWRSTS_OFF_ON		(PWRSTS_OFF | PWRSTS_ON)
>  #define PWRSTS_OFF_RET		(PWRSTS_OFF | PWRSTS_RET)
>  #define PWRSTS_RET_ON		(PWRSTS_RET | PWRSTS_ON)
> +#define PWRSTS_INACTIVE_ON	(PWRSTS_INACTIVE | PWRSTS_ON)
>  #define PWRSTS_OFF_RET_ON	(PWRSTS_OFF_RET | PWRSTS_ON)
>  
>  
> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> index b7ea468..fae6dea 100644
> --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> @@ -71,6 +71,22 @@ static struct powerdomain mpu_3xxx_pwrdm = {
>  	.voltdm           = { .name = "mpu_iva" },
>  };
>  
> +static struct powerdomain mpu_am35x_pwrdm = {
> +	.name		  = "mpu_pwrdm",
> +	.prcm_offs	  = MPU_MOD,
> +	.pwrsts		  = PWRSTS_INACTIVE_ON,
> +	.pwrsts_logic_ret = PWRSTS_INACTIVE,
> +	.flags		  = PWRDM_HAS_MPU_QUIRK,
> +	.banks		  = 1,
> +	.pwrsts_mem_ret	  = {
> +		[0] = PWRSTS_INACTIVE,
> +	},
> +	.pwrsts_mem_on	  = {
> +		[0] = PWRSTS_INACTIVE_ON,
> +	},
> +	.voltdm           = { .name = "mpu_iva" },
> +};
> +
>  /*
>   * The USBTLL Save-and-Restore mechanism is broken on
>   * 3430s up to ES3.0 and 3630ES1.0. Hence this feature
> @@ -120,6 +136,23 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
>  	.voltdm           = { .name = "core" },
>  };
>  
> +static struct powerdomain core_am35x_pwrdm = {
> +	.name		  = "core_pwrdm",
> +	.prcm_offs	  = CORE_MOD,
> +	.pwrsts		  = PWRSTS_INACTIVE_ON,
> +	.pwrsts_logic_ret = PWRSTS_INACTIVE,
> +	.banks		  = 2,
> +	.pwrsts_mem_ret	  = {
> +		[0] = PWRSTS_INACTIVE,	 /* MEM1RETSTATE */
> +		[1] = PWRSTS_INACTIVE,	 /* MEM2RETSTATE */
> +	},
> +	.pwrsts_mem_on	  = {
> +		[0] = PWRSTS_INACTIVE_ON, /* MEM1ONSTATE */
> +		[1] = PWRSTS_INACTIVE_ON, /* MEM2ONSTATE */
> +	},
> +	.voltdm           = { .name = "core" },
> +};
> +
>  static struct powerdomain dss_pwrdm = {
>  	.name		  = "dss_pwrdm",
>  	.prcm_offs	  = OMAP3430_DSS_MOD,
> @@ -135,6 +168,21 @@ static struct powerdomain dss_pwrdm = {
>  	.voltdm           = { .name = "core" },
>  };
>  
> +static struct powerdomain dss_am35x_pwrdm = {
> +	.name		  = "dss_pwrdm",
> +	.prcm_offs	  = OMAP3430_DSS_MOD,
> +	.pwrsts		  = PWRSTS_INACTIVE_ON,
> +	.pwrsts_logic_ret = PWRSTS_INACTIVE,
> +	.banks		  = 1,
> +	.pwrsts_mem_ret	  = {
> +		[0] = PWRSTS_INACTIVE, /* MEMRETSTATE */
> +	},
> +	.pwrsts_mem_on	  = {
> +		[0] = PWRSTS_ON,  /* MEMONSTATE */
> +	},
> +	.voltdm           = { .name = "core" },
> +};
> +
>  /*
>   * Although the 34XX TRM Rev K Table 4-371 notes that retention is a
>   * possible SGX powerstate, the SGX device itself does not support
> @@ -156,6 +204,21 @@ static struct powerdomain sgx_pwrdm = {
>  	.voltdm           = { .name = "core" },
>  };
>  
> +static struct powerdomain sgx_am35x_pwrdm = {
> +	.name		  = "sgx_pwrdm",
> +	.prcm_offs	  = OMAP3430ES2_SGX_MOD,
> +	.pwrsts		  = PWRSTS_INACTIVE_ON,
> +	.pwrsts_logic_ret = PWRSTS_INACTIVE,
> +	.banks		  = 1,
> +	.pwrsts_mem_ret	  = {
> +		[0] = PWRSTS_INACTIVE, /* MEMRETSTATE */
> +	},
> +	.pwrsts_mem_on	  = {
> +		[0] = PWRSTS_ON,  /* MEMONSTATE */
> +	},
> +	.voltdm           = { .name = "core" },
> +};
> +
>  static struct powerdomain cam_pwrdm = {
>  	.name		  = "cam_pwrdm",
>  	.prcm_offs	  = OMAP3430_CAM_MOD,
> @@ -186,6 +249,21 @@ static struct powerdomain per_pwrdm = {
>  	.voltdm           = { .name = "core" },
>  };
>  
> +static struct powerdomain per_am35x_pwrdm = {
> +	.name		  = "per_pwrdm",
> +	.prcm_offs	  = OMAP3430_PER_MOD,
> +	.pwrsts		  = PWRSTS_INACTIVE_ON,
> +	.pwrsts_logic_ret = PWRSTS_INACTIVE,
> +	.banks		  = 1,
> +	.pwrsts_mem_ret	  = {
> +		[0] = PWRSTS_INACTIVE, /* MEMRETSTATE */
> +	},
> +	.pwrsts_mem_on	  = {
> +		[0] = PWRSTS_ON,  /* MEMONSTATE */
> +	},
> +	.voltdm           = { .name = "core" },
> +};
> +
>  static struct powerdomain emu_pwrdm = {
>  	.name		= "emu_pwrdm",
>  	.prcm_offs	= OMAP3430_EMU_MOD,
> @@ -200,6 +278,14 @@ static struct powerdomain neon_pwrdm = {
>  	.voltdm           = { .name = "mpu_iva" },
>  };
>  
> +static struct powerdomain neon_am35x_pwrdm = {
> +	.name		  = "neon_pwrdm",
> +	.prcm_offs	  = OMAP3430_NEON_MOD,
> +	.pwrsts		  = PWRSTS_INACTIVE_ON,
> +	.pwrsts_logic_ret = PWRSTS_INACTIVE,
> +	.voltdm           = { .name = "mpu_iva" },
> +};
> +
>  static struct powerdomain usbhost_pwrdm = {
>  	.name		  = "usbhost_pwrdm",
>  	.prcm_offs	  = OMAP3430ES2_USBHOST_MOD,
> @@ -293,6 +379,22 @@ static struct powerdomain *powerdomains_omap3430es3_1plus[] __initdata = {
>  	NULL
>  };
>  
> +static struct powerdomain *powerdomains_am35x[] __initdata = {
> +	&wkup_omap2_pwrdm,
> +	&mpu_am35x_pwrdm,
> +	&neon_am35x_pwrdm,
> +	&core_am35x_pwrdm,
> +	&sgx_am35x_pwrdm,
> +	&dss_am35x_pwrdm,
> +	&per_am35x_pwrdm,
> +	&emu_pwrdm,
> +	&dpll1_pwrdm,
> +	&dpll3_pwrdm,
> +	&dpll4_pwrdm,
> +	&dpll5_pwrdm,
> +	NULL
> +};
> +
>  void __init omap3xxx_powerdomains_init(void)
>  {
>  	unsigned int rev;
> @@ -301,21 +403,29 @@ void __init omap3xxx_powerdomains_init(void)
>  		return;
>  
>  	pwrdm_register_platform_funcs(&omap3_pwrdm_operations);
> -	pwrdm_register_pwrdms(powerdomains_omap3430_common);
>  
>  	rev = omap_rev();
>  
> -	if (rev == OMAP3430_REV_ES1_0)
> -		pwrdm_register_pwrdms(powerdomains_omap3430es1);
> -	else if (rev == OMAP3430_REV_ES2_0 || rev == OMAP3430_REV_ES2_1 ||
> -		 rev == OMAP3430_REV_ES3_0 || rev == OMAP3630_REV_ES1_0)
> -		pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
> -	else if (rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2 ||
> -		 rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1 ||
> -		 rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2)
> -		pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
> -	else
> -		WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
> +	if (rev == OMAP3517_REV_ES1_0 || rev == OMAP3517_REV_ES1_1)
> +		pwrdm_register_pwrdms(powerdomains_am35x);
> +	else {
> +		pwrdm_register_pwrdms(powerdomains_omap3430_common);
> +
> +		if (rev == OMAP3430_REV_ES1_0)
> +			pwrdm_register_pwrdms(powerdomains_omap3430es1);
> +		else if (rev == OMAP3430_REV_ES2_0 ||
> +			 rev == OMAP3430_REV_ES2_1 ||
> +			 rev == OMAP3430_REV_ES3_0 ||
> +			 rev == OMAP3630_REV_ES1_0)
> +			pwrdm_register_pwrdms(powerdomains_omap3430es2_es3_0);
> +		else if (rev == OMAP3430_REV_ES3_1 ||
> +			 rev == OMAP3430_REV_ES3_1_2 ||
> +			 rev == OMAP3630_REV_ES1_1 ||
> +			 rev == OMAP3630_REV_ES1_2)
> +			pwrdm_register_pwrdms(powerdomains_omap3430es3_1plus);
> +		else
> +			WARN(1, "OMAP3 powerdomain init: unknown chip type\n");
> +	}
>  
>  	pwrdm_complete_init();
>  }
> -- 
> 1.7.9.4
> 


- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux