On OMAP4 we were writing 1 to IRQENABLE_CLR which cleared only
the arbitration lost interrupt. The patch intends to fix the same by writing 0
to the IE register clearing all interrupts.
This is based on the work done by Vikram Pandita <vikram.pandita@xxxxxx>.
The changes from the original patch ...
- Does not use the IRQENABLE_CLR register to clear as it is not mentioned
to be legacy register IRQENABLE_CLR helps in atomically
setting/clearing specific interrupts, instead use the OMAP_I2C_IE_REG as we are
clearing all interrupts.
Cc: Vikram Pandita <vikram.pandita@xxxxxx>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
---
drivers/i2c/busses/i2c-omap.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 45389db..2769f67 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1179,10 +1179,8 @@ static int omap_i2c_runtime_suspend(struct device *dev)
_dev->dev_lost_count = _dev->get_context_loss_count(dev);
_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
- if (_dev->dtrev == OMAP_I2C_IP_VERSION_2)
- omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
- else
- omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+
+ omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
iv = omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
