On Tue, Apr 10, 2012 at 2:59 PM, Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> wrote: > On Tue, Apr 10, 2012 at 02:27:36PM +0530, Santosh Shilimkar wrote: >> On Tuesday 10 April 2012 02:14 PM, Russell King - ARM Linux wrote: >> > On Mon, Apr 09, 2012 at 03:18:22PM -0500, Jon Hunter wrote: >> >> True, but we would always want to use the 32k timer if CONFIG_PM is >> >> specified. So what I am saying is that if a device has a 32ksync timer >> >> and CONFIG_PM is defined, we always want to use the 32ksync timer and a >> >> gptimer should never be used. >> > >> > Why? What if you want to have PM enabled, and you also want to use the >> > kernels high resolution timers, or you want more accurate timing than >> > the 30.5us tick interval of the 32k timer? >> >> You might have missed the earlier comments on the thread. High >> resolution GP timer(sysclk) will stop in deeper power states and >> hence it can't be used with PM enabled usecases. > > Which means folk should be given the choice at boot time between running > with the deeper power states and having a higher resolution timing source, > rather than denying them the higher resolution timing source when PM is > enabled. Good point. My point is such facilities is already part of the kernel and there is no need to add a new one. The last proposal was allowing user to choose gptimer as a clocksource and then you already have facility to disable C-state now so, all should work in general Regards Santosh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
