Hi, GPMC driver conversion series. NAND and smsc911x ethernet device has been adapted to use GPMC driver. Patches has been generated over linux-omap/master, HEAD 33fc21e Linux-omap rebuilt: Updated to v3.4-rc1, merged in most of pending branches As OMAP3EVM does not boot linux-omap/master, merge commit, 58adb29 Merge branch 'io_chain_devel_3.4' of git://git.pwsan.com/linux-2.6 into prm has to be reverted to get OMAP3EVM boot. Last patch (with subject prefix TMP - 9/9) is for testing. Once driver is acceptable, platform code for other peripherals connected via GPMC would be adapted to make use of GPMC driver. And then the board modifications. But before that HWMOD entry has to be populated for respective SoC(s ?). Now DESTINATION FOR THIS DRIVER has to be decided. Original plan was to consider GPMC as MFD. The peripheral(s) connected to GPMC being considered childs of MFD. GPMC (General Purpose Memory Controller) in brief: GPMC is an unified memory controller dedicated to interfacing external memory devices like Asynchronous SRAM like memories and application specific integrated circuit devices. Asynchronous, synchronous, and page mode burst NOR flash devices NAND flash Pseudo-SRAM devices GPMC has to be configured as required by timings of the connected peripheral. It needs to be configured only initially (only exception being resume afaik, where it needs to be reconfigured). Handling GPMC cannot be left to platform code to handle, then where can it be ? (currently it is handled by platform code). Once it is configured it can be used to handle different protocols like NAND, NOR. Various kinds of devices like ethernet, uart, usb, fpga etc can work using GPMC interface. GPMC has a seperate additional functionality of NAND handling (not manhandling ;) ). But with this series, dealing NAND block of GPMC has been separated from GPMC driver and given to NAND driver. It seems decision on where a driver should go is based more on functionality. Any suggestions on where GPMC driver could go would be very helpful. This would also help in reducing amount of platform code for OMAP. Various options that could be seen so far on where this driver can go, 1. mfd 2. misc 3. drivers/platform/arm/ (create an new one?) 4. memory (create a new one ?) If GPMC sounds similar to something else that is present in other chips, please be kind enough to let me know how this is handled by Kernel (if). GPMC details can be referred in AM335X Technical Reference Manual @ http://www.ti.com/lit/pdf/spruh73 Regards Afzal v3: Single device structure passed from platform for peripherals using multiple CS instead of using multiple device structure having a few redundant data, handle interrupts, GPMC NAND handling by GPMC NAND driver instead of GPMC driver v2: Avoid code movement that kept similar code together (for easy review) TODO: 1. Decide on destination of GPMC driver 2. Modify platform code so that remaining peripherals can be configured using GPMC driver instead of platform code doing so. 3. Remove static struct gpmc * (could be done once all other peripherals are adapted to use GPMC driver) 4. Devise method to handle OneNAND for GPMC cleanly 5. Handle acquiring CS# (if required) 6. Adapt to HWMOD, use RPM 7. Cleanup (once all peripherals make use of GPMC driver all the exported symbols can be removed, and complete removal of a few of these functions would be possible, like gpmc_nand_* can be deleted now itself) Afzal Mohammed (9): ARM: OMAP2+: gpmc: driver conversion ARM: OMAP2+: gpmc: registers for nand driver ARM: OMAP2+: nand: create platform data structure ARM: OMAP2+: gpmc-nand: populate gpmc configs ARM: OMAP2+: gpmc-smsc911x: gpmc driver information mtd: nand: omap2: obtain memory from resource mtd: nand: omap2: use gpmc provided irqs mtd: nand: omap2: handle nand on gpmc OMAP3EVM: Test gpmc-nand arch/arm/mach-omap2/board-devkit8000.c | 6 +- arch/arm/mach-omap2/board-flash.c | 63 +-- arch/arm/mach-omap2/board-flash.h | 13 +- arch/arm/mach-omap2/board-ldp.c | 4 +- arch/arm/mach-omap2/board-omap3beagle.c | 6 +- arch/arm/mach-omap2/board-omap3evm.c | 95 +++- arch/arm/mach-omap2/board-omap3touchbook.c | 6 +- arch/arm/mach-omap2/board-overo.c | 5 +- arch/arm/mach-omap2/board-zoom.c | 5 +- arch/arm/mach-omap2/common-board-devices.c | 46 -- arch/arm/mach-omap2/common-board-devices.h | 1 - arch/arm/mach-omap2/gpmc-nand.c | 97 ++-- arch/arm/mach-omap2/gpmc-smsc911x.c | 59 +-- arch/arm/mach-omap2/gpmc.c | 543 +++++++++++++++++++---- arch/arm/plat-omap/include/plat/gpmc-smsc911x.h | 9 +- arch/arm/plat-omap/include/plat/gpmc.h | 66 ++- arch/arm/plat-omap/include/plat/nand.h | 10 +- drivers/mtd/nand/omap2.c | 296 ++++++++---- 18 files changed, 981 insertions(+), 349 deletions(-) -- 1.7.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
