* Govindraj.R <govindraj.raja@xxxxxx> [120321 03:06]: > From: "Govindraj.R" <govindraj.raja@xxxxxx> > > The following commit: > (7496ba3 ARM: OMAP2+: UART: Add default mux for all uarts) > added default pads for all uarts. But not all boards tend to > use all uarts and most of unused uart pins are muxed for > other purpose. This commit breaks the modules which where trying > to use unused uart pins on their boards. > > So remove all default pads except uart1/3 as most boards > tend to use either uart1/3 as console port and use only tx/rx > lines, declare only those pads for uart1/3. > If any boards tend to use any other uart other uart1/3 > the mux data should to passed from board file and init individual > uart port using omap_serial_init_port api. This is still wrong. We can't mux any serial pins unless specifically requested from the board-*.c files. So please do a fix to get back to v3.2 behaviour where you basically revert 7496ba3. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
