* Tarun Kanti DebBarma <tarun.kanti@xxxxxx> [120329 03:05]: > These four patches incorporate changes to OMAP1 and OMAP2 platforms > board files whereby older references to OMAP_GPIO_IRQ macro are > now replaced with gpio_to_irq(), thereby getting rid of static > irq references. Thanks, I'll take your updated patches 1/4 and 2/4 combined into one. And I'll use my earlier updated comments to mention the breaking commits. As 3/4 and 4/4 have not changed, I'll use the earlier ones with an ack from Dmitry. Updated combined 1/4 and 2/4 below. Tony From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx> Date: Thu, 29 Mar 2012 08:41:01 -0700 Subject: [PATCH] ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq() The following commits change gpio-omap to use dynamic IRQ allocation: 25db711 gpio/omap: Fix IRQ handling for SPARSE_IRQ 384ebe1 gpio/omap: Add DT support to GPIO driver With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ is no longer valid. We must be using gpio_to_irq() instead. Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@xxxxxx> [tony@xxxxxxxxxxx: updated comments] Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 03e0050..3768088 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -244,8 +244,6 @@ static struct resource h2_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(0), - .end = OMAP_GPIO_IRQ(0), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -364,11 +362,9 @@ static struct tps65010_board tps_board = { static struct i2c_board_info __initdata h2_i2c_board_info[] = { { I2C_BOARD_INFO("tps65010", 0x48), - .irq = OMAP_GPIO_IRQ(58), .platform_data = &tps_board, }, { I2C_BOARD_INFO("isp1301_omap", 0x2d), - .irq = OMAP_GPIO_IRQ(2), }, }; @@ -437,10 +433,14 @@ static void __init h2_init(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); + h2_smc91x_resources[1].start = gpio_to_irq(0); + h2_smc91x_resources[1].end = gpio_to_irq(0); platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); + h2_i2c_board_info[0].irq = gpio_to_irq(58); + h2_i2c_board_info[1].irq = gpio_to_irq(2); omap_register_i2c_bus(1, 100, h2_i2c_board_info, ARRAY_SIZE(h2_i2c_board_info)); omap1_usb_init(&h2_usb_config); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index f304fe2..09e8582 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -246,8 +246,6 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(40), - .end = OMAP_GPIO_IRQ(40), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -337,7 +335,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { .modalias = "tsc2101", .bus_num = 2, .chip_select = 0, - .irq = OMAP_GPIO_IRQ(H3_TS_GPIO), .max_speed_hz = 16000000, /* .platform_data = &tsc_platform_data, */ }, @@ -377,11 +374,9 @@ static struct omap_board_config_kernel h3_config[] __initdata = { static struct i2c_board_info __initdata h3_i2c_board_info[] = { { I2C_BOARD_INFO("tps65013", 0x48), - /* .irq = OMAP_GPIO_IRQ(??), */ }, { I2C_BOARD_INFO("isp1301_omap", 0x2d), - .irq = OMAP_GPIO_IRQ(14), }, }; @@ -423,12 +418,16 @@ static void __init h3_init(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); + smc91x_resources[1].start = gpio_to_irq(40); + smc91x_resources[1].end = gpio_to_irq(40); platform_add_devices(devices, ARRAY_SIZE(devices)); + h3_spi_board_info[0].irq = gpio_to_irq(H3_TS_GPIO); spi_register_board_info(h3_spi_board_info, ARRAY_SIZE(h3_spi_board_info)); omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); + h3_i2c_board_info[1].irq = gpio_to_irq(14); omap_register_i2c_bus(1, 100, h3_i2c_board_info, ARRAY_SIZE(h3_i2c_board_info)); omap1_usb_init(&h3_usb_config); diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index fa52d14..797bbd6 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -323,8 +323,6 @@ static struct platform_device gpio_leds_device = { static struct resource htcpld_resources[] = { [0] = { - .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), - .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS), .flags = IORESOURCE_IRQ, }, }; @@ -453,7 +451,6 @@ static struct spi_board_info __initdata htcherald_spi_board_info[] = { { .modalias = "ads7846", .platform_data = &htcherald_ts_platform_data, - .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS), .max_speed_hz = 2500000, .bus_num = 2, .chip_select = 1, @@ -581,6 +578,8 @@ static void __init htcherald_init(void) /* Do board initialization before we register all the devices */ omap_board_config = htcherald_config; omap_board_config_size = ARRAY_SIZE(htcherald_config); + htcpld_resources[0].start = gpio_to_irq(HTCHERALD_GIRQ_BTNS); + htcpld_resources[0].end = gpio_to_irq(HTCHERALD_GIRQ_BTNS); platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); @@ -588,6 +587,7 @@ static void __init htcherald_init(void) htcherald_usb_enable(); omap1_usb_init(&htcherald_usb_config); + htcherald_spi_board_info[0].irq = gpio_to_irq(HTCHERALD_GPIO_TS); spi_register_board_info(htcherald_spi_board_info, ARRAY_SIZE(htcherald_spi_board_info)); diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 289a6b8..315c021 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -247,8 +247,6 @@ static struct resource innovator1610_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(0), - .end = OMAP_GPIO_IRQ(0), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -412,6 +410,8 @@ static void __init innovator_init(void) #endif #ifdef CONFIG_ARCH_OMAP16XX if (!cpu_is_omap1510()) { + innovator1610_smc91x_resources[1].start = gpio_to_irq(0); + innovator1610_smc91x_resources[1].end = gpio_to_irq(0); platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices)); } #endif diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index abdbdb0..1d87332 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -147,7 +147,6 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { .bus_num = 2, .chip_select = 0, .max_speed_hz = 2500000, - .irq = OMAP_GPIO_IRQ(15), .platform_data = &nokia770_ads7846_platform_data, }, }; @@ -242,6 +241,7 @@ static void __init omap_nokia770_init(void) omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); + nokia770_spi_board_info[1].irq = gpio_to_irq(15); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); omap_serial_init(); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e2d7ae4..a0c1a1c 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -128,8 +128,6 @@ static struct resource osk5912_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(0), - .end = OMAP_GPIO_IRQ(0), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -146,8 +144,6 @@ static struct platform_device osk5912_smc91x_device = { static struct resource osk5912_cf_resources[] = { [0] = { - .start = OMAP_GPIO_IRQ(62), - .end = OMAP_GPIO_IRQ(62), .flags = IORESOURCE_IRQ, }, }; @@ -239,7 +235,6 @@ static struct tps65010_board tps_board = { static struct i2c_board_info __initdata osk_i2c_board_info[] = { { I2C_BOARD_INFO("tps65010", 0x48), - .irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)), .platform_data = &tps_board, }, @@ -413,7 +408,6 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &mistral_ts_info, - .irq = OMAP_GPIO_IRQ(4), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, @@ -476,6 +470,7 @@ static void __init osk_mistral_init(void) gpio_direction_input(4); irq_set_irq_type(gpio_to_irq(4), IRQ_TYPE_EDGE_FALLING); + mistral_boardinfo[0].irq = gpio_to_irq(4); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -547,6 +542,10 @@ static void __init osk_init(void) osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); osk_flash_resource.end += SZ_32M - 1; + osk5912_smc91x_resources[1].start = gpio_to_irq(0); + osk5912_smc91x_resources[1].end = gpio_to_irq(0); + osk5912_cf_resources[0].start = gpio_to_irq(62); + osk5912_cf_resources[0].end = gpio_to_irq(62); platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); omap_board_config = osk_config; omap_board_config_size = ARRAY_SIZE(osk_config); @@ -563,6 +562,7 @@ static void __init osk_init(void) gpio_direction_input(OMAP_MPUIO(1)); omap_serial_init(); + osk_i2c_board_info[0].irq = gpio_to_irq(OMAP_MPUIO(1)); omap_register_i2c_bus(1, 400, osk_i2c_board_info, ARRAY_SIZE(osk_i2c_board_info)); osk_mistral_init(); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 04efa7e..66e2a74 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -220,7 +220,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = { .modalias = "tsc2102", .bus_num = 2, /* uWire (officially) */ .chip_select = 0, /* As opposed to 3 */ - .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO), .max_speed_hz = 8000000, }, }; @@ -257,6 +256,7 @@ static void __init omap_palmte_init(void) platform_add_devices(palmte_devices, ARRAY_SIZE(palmte_devices)); + palmte_spi_info[0].irq = gpio_to_irq(PALMTE_PINTDAV_GPIO); spi_register_board_info(palmte_spi_info, ARRAY_SIZE(palmte_spi_info)); palmte_misc_gpio_setup(); omap_serial_init(); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index acd1f36..fa9ce9c 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -256,7 +256,6 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &palmtt_ts_info, - .irq = OMAP_GPIO_IRQ(6), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, @@ -304,6 +303,7 @@ static void __init omap_palmtt_init(void) platform_add_devices(palmtt_devices, ARRAY_SIZE(palmtt_devices)); + palmtt_boardinfo[0].irq = gpio_to_irq(6); spi_register_board_info(palmtt_boardinfo,ARRAY_SIZE(palmtt_boardinfo)); omap_serial_init(); omap1_usb_init(&palmtt_usb_config); diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index c1cd0f2..b21df2f 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -223,7 +223,6 @@ static struct spi_board_info __initdata palmz71_boardinfo[] = { { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &palmz71_ts_info, - .irq = OMAP_GPIO_IRQ(PALMZ71_PENIRQ_GPIO), .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, @@ -319,6 +318,7 @@ omap_palmz71_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); + palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO); spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); omap1_usb_init(&palmz71_usb_config); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 659d0f7..37232d0 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -44,7 +44,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x40000), - .irq = OMAP_GPIO_IRQ(12), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -52,7 +51,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x50000), - .irq = OMAP_GPIO_IRQ(13), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -60,7 +58,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x60000), - .irq = OMAP_GPIO_IRQ(14), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -68,7 +65,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { }, { .mapbase = (unsigned long)(OMAP_CS1_PHYS + 0x70000), - .irq = OMAP_GPIO_IRQ(15), .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, .iotype = UPIO_MEM, .regshift = 1, @@ -80,9 +76,6 @@ static struct plat_serial8250_port voiceblue_ports[] = { static struct platform_device serial_device = { .name = "serial8250", .id = PLAT8250_DEV_PLATFORM1, - .dev = { - .platform_data = voiceblue_ports, - }, }; static int __init ext_uart_init(void) @@ -90,6 +83,11 @@ static int __init ext_uart_init(void) if (!machine_is_voiceblue()) return -ENODEV; + voiceblue_ports[0].irq = gpio_to_irq(12); + voiceblue_ports[1].irq = gpio_to_irq(13); + voiceblue_ports[2].irq = gpio_to_irq(14); + voiceblue_ports[3].irq = gpio_to_irq(15); + serial_device.dev.platform_data = voiceblue_ports; return platform_device_register(&serial_device); } arch_initcall(ext_uart_init); @@ -128,8 +126,6 @@ static struct resource voiceblue_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(8), - .end = OMAP_GPIO_IRQ(8), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -275,6 +271,8 @@ static void __init voiceblue_init(void) irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); + voiceblue_smc91x_resources[1].start = gpio_to_irq(8); + voiceblue_smc91x_resources[1].end = gpio_to_irq(8); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; omap_board_config_size = ARRAY_SIZE(voiceblue_config); diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 7370983..5a1b6af 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -230,12 +230,12 @@ static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = { { I2C_BOARD_INFO("isp1301_omap", 0x2D), .flags = I2C_CLIENT_WAKE, - .irq = OMAP_GPIO_IRQ(78), }, }; static int __init omap2430_i2c_init(void) { + sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78); omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 4e90715..a09c699 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -873,7 +873,6 @@ static void __init omap4_sdp4430_wifi_mux_init(void) } static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { - .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ), .board_ref_clock = WL12XX_REFCLOCK_26, .board_tcxo_clock = WL12XX_TCXOCLOCK_26, }; @@ -883,6 +882,7 @@ static void __init omap4_sdp4430_wifi_init(void) int ret; omap4_sdp4430_wifi_mux_init(); + omap4_sdp4430_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ); ret = wl12xx_set_platform_data(&omap4_sdp4430_wlan_data); if (ret) pr_err("Error setting wl12xx data: %d\n", ret); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index ac77382..768ece2 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -136,8 +136,6 @@ static struct resource apollon_smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(APOLLON_ETHR_GPIO_IRQ), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -341,6 +339,8 @@ static void __init omap_apollon_init(void) * You have to mux them off in device drivers later on * if not needed. */ + apollon_smc91x_resources[1].start = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); + apollon_smc91x_resources[1].end = gpio_to_irq(APOLLON_ETHR_GPIO_IRQ); platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices)); omap_serial_init(); omap_sdrc_init(NULL, NULL); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e873063..87cdb86 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -410,7 +410,6 @@ static struct resource omap_dm9000_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -637,6 +636,7 @@ static void __init devkit8000_init(void) omap_dm9000_init(); devkit8000_i2c_init(); + omap_dm9000_resources[2].start = gpio_to_irq(OMAP_DM9000_GPIO_IRQ); platform_add_devices(devkit8000_devices, ARRAY_SIZE(devkit8000_devices)); diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 54af800..0bbbabe 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -348,7 +348,6 @@ static struct at24_platform_data m24c01 = { static struct i2c_board_info __initdata h4_i2c_board_info[] = { { I2C_BOARD_INFO("isp1301_omap", 0x2d), - .irq = OMAP_GPIO_IRQ(125), }, { /* EEPROM on mainboard */ I2C_BOARD_INFO("24c01", 0x52), @@ -377,6 +376,7 @@ static void __init omap_h4_init(void) */ board_mkp_init(); + h4_i2c_board_info[0].irq = gpio_to_irq(125); i2c_register_board_info(1, h4_i2c_board_info, ARRAY_SIZE(h4_i2c_board_info)); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c775bea..20a4743 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -487,7 +487,6 @@ static struct platform_device omap3evm_wlan_regulator = { }; struct wl12xx_platform_data omap3evm_wlan_data __initdata = { - .irq = OMAP_GPIO_IRQ(OMAP3EVM_WLAN_IRQ_GPIO), .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */ }; #endif @@ -623,6 +622,7 @@ static void __init omap3_evm_wl12xx_init(void) int ret; /* WL12xx WLAN Init */ + omap3evm_wlan_data.irq = gpio_to_irq(OMAP3EVM_WLAN_IRQ_GPIO); ret = wl12xx_set_platform_data(&omap3evm_wlan_data); if (ret) pr_err("error setting wl12xx data: %d\n", ret); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 28fc271..4496007 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -199,7 +199,6 @@ static struct platform_device omap_vwlan_device = { }; struct wl12xx_platform_data omap_panda_wlan_data __initdata = { - .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ), /* PANDA ref clock is 38.4 MHz */ .board_ref_clock = 2, }; @@ -494,6 +493,7 @@ static void __init omap4_panda_init(void) package = OMAP_PACKAGE_CBL; omap4_mux_init(board_mux, NULL, package); + omap_panda_wlan_data.irq = gpio_to_irq(GPIO_WIFI_IRQ); ret = wl12xx_set_platform_data(&omap_panda_wlan_data); if (ret) pr_err("error setting wl12xx data: %d\n", ret); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 0a66891..2b6db67 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -169,7 +169,6 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .modalias = "tsc2005", .bus_num = 1, .chip_select = 0, - .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO), .max_speed_hz = 6000000, .controller_data = &tsc2005_mcspi_config, .platform_data = &tsc2005_pdata, @@ -1121,6 +1120,8 @@ static void __init rx51_init_tsc2005(void) "tsc2005 reset"); if (r >= 0) { tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; + rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = + gpio_to_irq(RX51_TSC2005_IRQ_GPIO); } else { printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset"); tsc2005_pdata.esd_timeout_ms = 0; diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 369c2eb..1e8540e 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -43,7 +43,6 @@ static inline void __init zoom_init_smsc911x(void) static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = ZOOM_UART_BASE, - .irq = OMAP_GPIO_IRQ(102), .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ, .irqflags = IRQF_SHARED | IRQF_TRIGGER_RISING, .iotype = UPIO_MEM, @@ -89,6 +88,8 @@ static inline void __init zoom_init_quaduart(void) if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0) printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", quart_gpio); + + serial_platform_data[0].irq = gpio_to_irq(102); } static inline int omap_zoom_debugboard_detect(void) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index c126461..a489f82 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -193,7 +193,6 @@ static struct platform_device omap_vwlan_device = { }; static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { - .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), /* ZOOM ref clock is 26 MHz */ .board_ref_clock = 1, }; @@ -296,7 +295,10 @@ static void enable_board_wakeup_source(void) void __init zoom_peripherals_init(void) { - int ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); + int ret; + + omap_zoom_wlan_data.irq = gpio_to_irq(OMAP_ZOOM_WLAN_IRQ_GPIO); + ret = wl12xx_set_platform_data(&omap_zoom_wlan_data); if (ret) pr_err("error setting wl12xx data: %d\n", ret); diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 2d1d775..9238ce0 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -78,7 +78,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, ads7846_config.gpio_pendown = gpio_pendown; spi_bi->bus_num = bus_num; - spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); + spi_bi->irq = gpio_to_irq(gpio_pendown); if (board_pdata) spi_bi->platform_data = board_pdata; -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html