On Fri, Mar 23, 2012 at 11:13:50AM -0600, mathieu.poirier@xxxxxxxxxx wrote: > From: Russell King <linux@xxxxxxxxxxxxxxxx> This is wrong. I am not the author of this patch. > When the omap driver is built as a module for n8x0, > n8x0_mmc_set_power_menelaus cannot call into the driver: > > arch/arm/mach-omap2/board-n8x0.c:374: undefined reference > to `omap_mmc_notify_cover_event' > > As a workaround, do not provide that device in this case. This needs > to be fixed properly, e.g. by converting n8x0 to be probed through the > device tree and moving that code into the driver. > > Signed-off-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx> > Suggested-by: Russell King <linux@xxxxxxxxxxxxxxxx> > Acked-by: Tony Lindgren <tony@xxxxxxxxxxx> > --- > arch/arm/mach-omap2/board-n8x0.c | 6 ++++-- > 1 files changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c > index 6722627..8529ca0 100644 > --- a/arch/arm/mach-omap2/board-n8x0.c > +++ b/arch/arm/mach-omap2/board-n8x0.c > @@ -193,8 +193,10 @@ static struct omap_onenand_platform_data board_onenand_data[] = { > }; > #endif > > -#if defined(CONFIG_MENELAUS) && \ > - (defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)) > +#ifdef CONFIG_MMC_OMAP_MODULE > +#warning FIXME: cannot call omap_mmc_notify_cover_event for CONFIG_MMC_OMAP_MODULE > +#endif > +#if defined(CONFIG_MENELAUS) && (defined(CONFIG_MMC_OMAP) > > /* > * On both N800 and N810, only the first of the two MMC controllers is in use. > -- > 1.7.5.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html