Re: [RFC][PATCH 2/9] ARM: OMAP3: cpuidle - remove next_valid_state function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Daniel,

On Fri, Mar 23, 2012 at 10:26 AM, Daniel Lezcano
<daniel.lezcano@xxxxxxxxxx> wrote:
> As we will be able to remove C-states from userspace with the sysfs
> API, this function is no longer needed. We remove it and that simplifies
> the code for more consolidation.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> ---
>  arch/arm/mach-omap2/cpuidle34xx.c |   85 +------------------------------------
>  1 files changed, 2 insertions(+), 83 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
> index d67431a..65b4e7aa 100644
> --- a/arch/arm/mach-omap2/cpuidle34xx.c
> +++ b/arch/arm/mach-omap2/cpuidle34xx.c
> @@ -164,84 +164,6 @@ return_sleep_time:
>  }
>
>  /**
> - * next_valid_state - Find next valid C-state
> - * @dev: cpuidle device
> - * @drv: cpuidle driver
> - * @index: Index of currently selected c-state
> - *
> - * If the state corresponding to index is valid, index is returned back
> - * to the caller. Else, this function searches for a lower c-state which is
> - * still valid (as defined in omap3_power_states[]) and returns its index.
> - *
> - * A state is valid if the 'valid' field is enabled and
> - * if it satisfies the enable_off_mode condition.
> - */
> -static int next_valid_state(struct cpuidle_device *dev,
> -                       struct cpuidle_driver *drv,
> -                               int index)
> -{
> -       struct cpuidle_state_usage *curr_usage = &dev->states_usage[index];
> -       struct cpuidle_state *curr = &drv->states[index];
> -       struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr_usage);
> -       u32 mpu_deepest_state = PWRDM_POWER_RET;
> -       u32 core_deepest_state = PWRDM_POWER_RET;
> -       int next_index = -1;
> -
> -       if (enable_off_mode) {
> -               mpu_deepest_state = PWRDM_POWER_OFF;
> -               /*
> -                * Erratum i583: valable for ES rev < Es1.2 on 3630.
> -                * CORE OFF mode is not supported in a stable form, restrict
> -                * instead the CORE state to RET.
> -                */
> -               if (!IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583))
> -                       core_deepest_state = PWRDM_POWER_OFF;
> -       }
I am OK to remove the function but some of the code needs to stay (can
be moved into enter_idle_bm).
The errata code is needed.

> -
> -       /* Check if current state is valid */
> -       if ((cx->valid) &&
> -           (cx->mpu_state >= mpu_deepest_state) &&
> -           (cx->core_state >= core_deepest_state)) {
> -               return index;
> -       } else {
> -               int idx = OMAP3_NUM_STATES - 1;
On OMAP3 not all the power states combinations are allowed, so this
code looks for a C-state which satisfies the enable_off_mode flag.
I am planning to remove the enable_off_mode flag but this has to come
with the per-device PM QoS constraints code.

> -
> -               /* Reach the current state starting at highest C-state */
> -               for (; idx >= 0; idx--) {
> -                       if (&drv->states[idx] == curr) {
> -                               next_index = idx;
> -                               break;
> -                       }
> -               }
> -
> -               /* Should never hit this condition */
> -               WARN_ON(next_index == -1);
> -
> -               /*
> -                * Drop to next valid state.
> -                * Start search from the next (lower) state.
> -                */
> -               idx--;
> -               for (; idx >= 0; idx--) {
> -                       cx = cpuidle_get_statedata(&dev->states_usage[idx]);
> -                       if ((cx->valid) &&
> -                           (cx->mpu_state >= mpu_deepest_state) &&
> -                           (cx->core_state >= core_deepest_state)) {
> -                               next_index = idx;
> -                               break;
> -                       }
> -               }
> -               /*
> -                * C1 is always valid.
> -                * So, no need to check for 'next_index == -1' outside
> -                * this loop.
> -                */
> -       }
> -
> -       return next_index;
> -}
> -
> -/**
>  * omap3_enter_idle_bm - Checks for any bus activity
>  * @dev: cpuidle device
>  * @drv: cpuidle driver
> @@ -254,7 +176,6 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
>                                struct cpuidle_driver *drv,
>                               int index)
>  {
> -       int new_state_idx;
>        u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state;
>        struct omap3_idle_statedata *cx;
>        int ret;
> @@ -265,7 +186,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
>         */
>        cam_state = pwrdm_read_pwrst(cam_pd);
>        if (cam_state == PWRDM_POWER_ON) {
> -               new_state_idx = drv->safe_state_index;
> +               index = drv->safe_state_index;
>                goto select_state;
>        }
>
> @@ -292,10 +213,8 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
>        if (per_next_state != per_saved_state)
>                pwrdm_set_next_pwrst(per_pd, per_next_state);
>
> -       new_state_idx = next_valid_state(dev, drv, index);
> -
>  select_state:
> -       ret = omap3_enter_idle(dev, drv, new_state_idx);
> +       ret = omap3_enter_idle(dev, drv, index);
>
>        /* Restore original PER state if it was modified */
>        if (per_next_state != per_saved_state)
> --
> 1.7.5.4
>

Regards,
Jean
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux