Re: [PATCH 1/2] OMAPDSS: TPO-TD03MTEA1: Check for errors from regulator_enable()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2012-03-19 at 15:02 +0000, Mark Brown wrote:
> It is possible for regulator_enable() to fail and if it does fail that's
> generally a bad sign for anything we try to do with the hardware afterwards
> so check for and immediately return an error if regulator_enable() fails.
> 
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>  .../video/omap2/displays/panel-tpo-td043mtea1.c    |    5 ++++-
>  1 files changed, 4 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
> index 32f3fcd..74c6b87 100644
> --- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
> +++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c
> @@ -272,11 +272,14 @@ static const struct omap_video_timings tpo_td043_timings = {
>  static int tpo_td043_power_on(struct tpo_td043_device *tpo_td043)
>  {
>  	int nreset_gpio = tpo_td043->nreset_gpio;
> +	int r;
>  
>  	if (tpo_td043->powered_on)
>  		return 0;
>  
> -	regulator_enable(tpo_td043->vcc_reg);
> +	r = regulator_enable(tpo_td043->vcc_reg);
> +	if (r != 0)
> +		return r;
>  
>  	/* wait for regulator to stabilize */
>  	msleep(160);

Thanks, I'll apply this series to omapdss tree.

 Tomi

Attachment: signature.asc
Description: This is a digitally signed message part


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux