From: "Govindraj.R" <govindraj.raja@xxxxxx>
>From omap36xx onwards the module wakeup enable reg
wer has TX wakeup bit available enable the same
by populating the necessary tx wakeup flag for the
applicable module ip blocks and use the same
while configuaring wer reg.
Also wer is not context restored, restore wer when
context is lost.
Cc: Paul Walmsley <paul@xxxxxxxxx>
Cc: Felipe Balbi <balbi@xxxxxx
Cc: Kevin Hilman <khilman@xxxxxx>
Signed-off-by: Govindraj.R <govindraj.raja@xxxxxx>
---
arch/arm/plat-omap/include/plat/omap-serial.h | 7 +++++++
drivers/tty/serial/omap-serial.c | 9 ++++++++-
2 files changed, 15 insertions(+), 1 deletions(-)
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index 1a52725..8a4ca5c 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -61,6 +61,11 @@
#define UART_ERRATA_i202_MDR1_ACCESS BIT(0)
#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1)
+#define OMAP_UART_TX_WAKEUP_EN BIT(7)
+
+/* Feature flags */
+#define OMAP_UART_WER_HAS_TX_WAKEUP BIT(0)
+
struct omap_uart_port_info {
bool dma_enabled; /* To specify DMA Mode */
unsigned int uartclk; /* UART clock rate */
@@ -116,6 +121,7 @@ struct uart_omap_port {
unsigned char dlh;
unsigned char mdr1;
unsigned char scr;
+ unsigned char wer;
int use_dma;
/*
@@ -129,6 +135,7 @@ struct uart_omap_port {
unsigned long port_activity;
u32 context_loss_cnt;
u32 errata;
+ u32 features;
u8 wakeups_enabled;
struct pm_qos_request pm_qos_request;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index c7666d6..20d568d 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -585,7 +585,11 @@ static int serial_omap_startup(struct uart_port *port)
serial_out(up, UART_IER, up->ier);
/* Enable module level wake up */
- serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
+ up->wer = OMAP_UART_WER_MOD_WKUP;
+ if (up->features & OMAP_UART_WER_HAS_TX_WAKEUP)
+ up->wer |= OMAP_UART_TX_WAKEUP_EN;
+
+ serial_out(up, UART_OMAP_WER, up->wer);
pm_runtime_mark_last_busy(&up->pdev->dev);
pm_runtime_put_autosuspend(&up->pdev->dev);
@@ -1396,9 +1400,11 @@ static void omap_serial_fill_features_erratas(struct uart_omap_port *up)
case OMAP_UART_REV_52:
up->errata |= (UART_ERRATA_i202_MDR1_ACCESS |
UART_ERRATA_i291_DMA_FORCEIDLE);
+ up->features |= OMAP_UART_WER_HAS_TX_WAKEUP;
break;
case OMAP_UART_REV_63:
up->errata |= UART_ERRATA_i202_MDR1_ACCESS;
+ up->features |= OMAP_UART_WER_HAS_TX_WAKEUP;
break;
default:
break;
@@ -1629,6 +1635,7 @@ static void serial_omap_restore_context(struct uart_omap_port *up)
serial_omap_mdr1_errataset(up, up->mdr1);
else
serial_out(up, UART_OMAP_MDR1, up->mdr1);
+ serial_out(up, UART_OMAP_WER, up->wer);
}
static int serial_omap_runtime_suspend(struct device *dev)
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
