[PATCH 10/10] ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jean Pihet <j-pihet@xxxxxx>

After a clean-up of the interfaces the OMAP IP driver and class
support code is now a generic driver.
Move it to drivers/power/avs/.

The build is controlled by the following Kconfig options:
 . CONFIG_POWER_AVS: general knob for Adaptive Voltage Scaling support,
 . CONFIG_POWER_AVS_OMAP: AVS support on OMAP containing the version 1
    or version 2 of the SmartReflex IP,
 . CONFIG_POWER_AVS_OMAP_CLASS3: Class 3 implementation of Smartreflex.

Signed-off-by: Jean Pihet <j-pihet@xxxxxx>
---
 arch/arm/mach-omap2/Makefile             |    3 +-
 arch/arm/mach-omap2/smartreflex-class3.c |   60 --
 arch/arm/mach-omap2/smartreflex.c        | 1120 ------------------------------
 arch/arm/mach-omap2/smartreflex.h        |  238 -------
 arch/arm/plat-omap/Kconfig               |   46 --
 drivers/power/Kconfig                    |    2 +
 drivers/power/Makefile                   |    2 +
 drivers/power/avs/Kconfig                |   45 ++
 drivers/power/avs/Makefile               |    2 +
 drivers/power/avs/smartreflex-class3.c   |   60 ++
 drivers/power/avs/smartreflex.c          | 1117 +++++++++++++++++++++++++++++
 drivers/power/avs/smartreflex.h          |  238 +++++++
 12 files changed, 1467 insertions(+), 1466 deletions(-)
 delete mode 100644 arch/arm/mach-omap2/smartreflex-class3.c
 delete mode 100644 arch/arm/mach-omap2/smartreflex.c
 delete mode 100644 arch/arm/mach-omap2/smartreflex.h
 create mode 100644 drivers/power/avs/Kconfig
 create mode 100644 drivers/power/avs/Makefile
 create mode 100644 drivers/power/avs/smartreflex-class3.c
 create mode 100644 drivers/power/avs/smartreflex.c
 create mode 100644 drivers/power/avs/smartreflex.h

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 30666fd..bb23056 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -69,8 +69,7 @@ obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o \
 					   cpuidle44xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 
-obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o smartreflex.o
-obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)	+= smartreflex-class3.o
+obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
deleted file mode 100644
index 9a19ce7..0000000
--- a/arch/arm/mach-omap2/smartreflex-class3.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Smart reflex Class 3 specific implementations
- *
- * Author: Thara Gopinath       <thara@xxxxxx>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "smartreflex.h"
-
-static int sr_class3_enable(struct omap_sr *sr)
-{
-	unsigned long volt = voltdm_get_voltage(sr->voltdm);
-
-	if (!volt) {
-		pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
-				__func__, sr->name);
-		return -ENODATA;
-	}
-
-	omap_vp_enable(sr->voltdm);
-	return sr_enable(sr->voltdm, volt);
-}
-
-static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
-{
-	sr_disable_errgen(sr->voltdm);
-	omap_vp_disable(sr->voltdm);
-	sr_disable(sr->voltdm);
-	if (is_volt_reset)
-		voltdm_reset(sr->voltdm);
-
-	return 0;
-}
-
-static int sr_class3_configure(struct omap_sr *sr)
-{
-	return sr_configure_errgen(sr->voltdm);
-}
-
-/* SR class3 structure */
-static struct omap_sr_class_data class3_data = {
-	.enable = sr_class3_enable,
-	.disable = sr_class3_disable,
-	.configure = sr_class3_configure,
-	.class_type = SR_CLASS3,
-};
-
-/* Smartreflex Class3 init API to be called from board file */
-static int __init sr_class3_init(void)
-{
-	pr_info("SmartReflex Class3 initialized\n");
-	return sr_register_class(&class3_data);
-}
-late_initcall(sr_class3_init);
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
deleted file mode 100644
index 52950a1..0000000
--- a/arch/arm/mach-omap2/smartreflex.c
+++ /dev/null
@@ -1,1120 +0,0 @@
-/*
- * OMAP SmartReflex Voltage Control
- *
- * Author: Thara Gopinath	<thara@xxxxxx>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@xxxxxx>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/pm_runtime.h>
-
-#include "common.h"
-
-#include "pm.h"
-#include "smartreflex.h"
-
-#define SMARTREFLEX_NAME_LEN	16
-#define NVALUE_NAME_LEN		40
-#define SR_DISABLE_TIMEOUT	200
-
-/* sr_list contains all the instances of smartreflex module */
-static LIST_HEAD(sr_list);
-
-static struct omap_sr_class_data *sr_class;
-static struct omap_sr_pmic_data *sr_pmic_data;
-static struct dentry		*sr_dbg_dir;
-
-static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
-{
-	__raw_writel(value, (sr->base + offset));
-}
-
-static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
-					u32 value)
-{
-	u32 reg_val;
-
-	/*
-	 * Smartreflex error config register is special as it contains
-	 * certain status bits which if written a 1 into means a clear
-	 * of those bits. So in order to make sure no accidental write of
-	 * 1 happens to those status bits, do a clear of them in the read
-	 * value. This mean this API doesn't rewrite values in these bits
-	 * if they are currently set, but does allow the caller to write
-	 * those bits.
-	 */
-	if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1)
-		mask |= ERRCONFIG_STATUS_V1_MASK;
-	else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2)
-		mask |= ERRCONFIG_VPBOUNDINTST_V2;
-
-	reg_val = __raw_readl(sr->base + offset);
-	reg_val &= ~mask;
-
-	value &= mask;
-
-	reg_val |= value;
-
-	__raw_writel(reg_val, (sr->base + offset));
-}
-
-static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
-{
-	return __raw_readl(sr->base + offset);
-}
-
-static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr_info;
-
-	if (!voltdm) {
-		pr_err("%s: Null voltage domain passed!\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
-
-	list_for_each_entry(sr_info, &sr_list, node) {
-		if (voltdm == sr_info->voltdm)
-			return sr_info;
-	}
-
-	return ERR_PTR(-ENODATA);
-}
-
-static irqreturn_t sr_interrupt(int irq, void *data)
-{
-	struct omap_sr *sr_info = data;
-	u32 status = 0;
-
-	switch (sr_info->ip_type) {
-	case SR_TYPE_V1:
-		/* Read the status bits */
-		status = sr_read_reg(sr_info, ERRCONFIG_V1);
-
-		/* Clear them by writing back */
-		sr_write_reg(sr_info, ERRCONFIG_V1, status);
-		break;
-	case SR_TYPE_V2:
-		/* Read the status bits */
-		status = sr_read_reg(sr_info, IRQSTATUS);
-
-		/* Clear them by writing back */
-		sr_write_reg(sr_info, IRQSTATUS, status);
-		break;
-	default:
-		dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n",
-			sr_info->ip_type);
-		return IRQ_NONE;
-	}
-
-	if (sr_class->notify)
-		sr_class->notify(sr_info, status);
-
-	return IRQ_HANDLED;
-}
-
-static void sr_set_clk_length(struct omap_sr *sr)
-{
-	struct clk *sys_ck;
-	u32 sys_clk_speed;
-
-	if (cpu_is_omap34xx())
-		sys_ck = clk_get(NULL, "sys_ck");
-	else
-		sys_ck = clk_get(NULL, "sys_clkin_ck");
-
-	if (IS_ERR(sys_ck)) {
-		dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
-			__func__);
-		return;
-	}
-
-	sys_clk_speed = clk_get_rate(sys_ck);
-	clk_put(sys_ck);
-
-	switch (sys_clk_speed) {
-	case 12000000:
-		sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
-		break;
-	case 13000000:
-		sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
-		break;
-	case 19200000:
-		sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
-		break;
-	case 26000000:
-		sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
-		break;
-	case 38400000:
-		sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n",
-			__func__, sys_clk_speed);
-		break;
-	}
-}
-
-static void sr_set_regfields(struct omap_sr *sr)
-{
-	/*
-	 * For time being these values are defined in smartreflex.h
-	 * and populated during init. May be they can be moved to board
-	 * file or pmic specific data structure. In that case these structure
-	 * fields will have to be populated using the pdata or pmic structure.
-	 */
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		sr->err_weight = OMAP3430_SR_ERRWEIGHT;
-		sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
-		sr->accum_data = OMAP3430_SR_ACCUMDATA;
-		if (!(strcmp(sr->name, "sr_mpu_iva"))) {
-			sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
-			sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
-		} else {
-			sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
-			sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
-		}
-	}
-}
-
-static void sr_start_vddautocomp(struct omap_sr *sr)
-{
-	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
-		dev_warn(&sr->pdev->dev,
-			"%s: smartreflex class driver not registered\n",
-			__func__);
-		return;
-	}
-
-	if (!sr_class->enable(sr))
-		sr->autocomp_active = true;
-}
-
-static void sr_stop_vddautocomp(struct omap_sr *sr)
-{
-	if (!sr_class || !(sr_class->disable)) {
-		dev_warn(&sr->pdev->dev,
-			"%s: smartreflex class driver not registered\n",
-			__func__);
-		return;
-	}
-
-	if (sr->autocomp_active) {
-		sr_class->disable(sr, 1);
-		sr->autocomp_active = false;
-	}
-}
-
-/*
- * This function handles the intializations which have to be done
- * only when both sr device and class driver regiter has
- * completed. This will be attempted to be called from both sr class
- * driver register and sr device intializtion API's. Only one call
- * will ultimately succeed.
- *
- * Currently this function registers interrupt handler for a particular SR
- * if smartreflex class driver is already registered and has
- * requested for interrupts and the SR interrupt line in present.
- */
-static int sr_late_init(struct omap_sr *sr_info)
-{
-	struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
-	struct resource *mem;
-	int ret = 0;
-
-	if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
-		ret = request_irq(sr_info->irq, sr_interrupt,
-				  0, sr_info->name, sr_info);
-		if (ret)
-			goto error;
-		disable_irq(sr_info->irq);
-	}
-
-	if (pdata && pdata->enable_on_init)
-		sr_start_vddautocomp(sr_info);
-
-	return ret;
-
-error:
-	iounmap(sr_info->base);
-	mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
-	list_del(&sr_info->node);
-	dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
-		"interrupt handler. Smartreflex will"
-		"not function as desired\n", __func__);
-	kfree(sr_info);
-
-	return ret;
-}
-
-static void sr_v1_disable(struct omap_sr *sr)
-{
-	int timeout = 0;
-	int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
-			ERRCONFIG_MCUBOUNDINTST;
-
-	/* Enable MCUDisableAcknowledge interrupt */
-	sr_modify_reg(sr, ERRCONFIG_V1,
-			ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
-
-	/* SRCONFIG - disable SR */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
-
-	/* Disable all other SR interrupts and clear the status as needed */
-	if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1)
-		errconf_val |= ERRCONFIG_VPBOUNDINTST_V1;
-	sr_modify_reg(sr, ERRCONFIG_V1,
-			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
-			ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
-			errconf_val);
-
-	/*
-	 * Wait for SR to be disabled.
-	 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
-	 */
-	sr_test_cond_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
-			     ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
-			     timeout);
-
-	if (timeout >= SR_DISABLE_TIMEOUT)
-		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
-			__func__);
-
-	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
-	sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
-			ERRCONFIG_MCUDISACKINTST);
-}
-
-static void sr_v2_disable(struct omap_sr *sr)
-{
-	int timeout = 0;
-
-	/* Enable MCUDisableAcknowledge interrupt */
-	sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
-
-	/* SRCONFIG - disable SR */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
-
-	/*
-	 * Disable all other SR interrupts and clear the status
-	 * write to status register ONLY on need basis - only if status
-	 * is set.
-	 */
-	if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2)
-		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
-			ERRCONFIG_VPBOUNDINTST_V2);
-	else
-		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
-				0x0);
-	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
-			IRQENABLE_MCUVALIDINT |
-			IRQENABLE_MCUBOUNDSINT));
-	sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
-			IRQSTATUS_MCVALIDINT |
-			IRQSTATUS_MCBOUNDSINT));
-
-	/*
-	 * Wait for SR to be disabled.
-	 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
-	 */
-	sr_test_cond_timeout((sr_read_reg(sr, IRQSTATUS) &
-			     IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
-			     timeout);
-
-	if (timeout >= SR_DISABLE_TIMEOUT)
-		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
-			__func__);
-
-	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
-	sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
-	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
-}
-
-static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
-				struct omap_sr *sr,
-				unsigned long volt_nominal)
-{
-	int i;
-
-	if (!sr->nvalue_table) {
-		dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
-			__func__);
-		return NULL;
-	}
-
-	for (i = 0; i < sr->nvalue_count; i++) {
-		if (sr->nvalue_table[i].volt_nominal == volt_nominal)
-			return &sr->nvalue_table[i];
-	}
-
-	return NULL;
-}
-
-/* Public Functions */
-
-/**
- * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
- *			 error generator module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * configure the error generator module inside the smartreflex module.
- * SR settings if using the ERROR module inside Smartreflex.
- * SR CLASS 3 by default uses only the ERROR module where as
- * SR CLASS 2 can choose between ERROR module and MINMAXAVG
- * module. Returns 0 on success and error value in case of failure.
- */
-int sr_configure_errgen(struct voltagedomain *voltdm)
-{
-	u32 sr_config, sr_errconfig, errconfig_offs;
-	u32 vpboundint_en, vpboundint_st;
-	u32 senp_en = 0, senn_en = 0;
-	u8 senp_shift, senn_shift;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
-		return PTR_ERR(sr);
-	}
-
-	if (!sr->clk_length)
-		sr_set_clk_length(sr);
-
-	senp_en = sr->senp_mod;
-	senn_en = sr->senn_mod;
-
-	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
-		SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
-
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		sr_config |= SRCONFIG_DELAYCTRL;
-		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
-		errconfig_offs = ERRCONFIG_V1;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
-		break;
-	case SR_TYPE_V2:
-		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
-		errconfig_offs = ERRCONFIG_V2;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
-	sr_write_reg(sr, SRCONFIG, sr_config);
-	sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
-		(sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
-		(sr->err_minlimit <<  ERRCONFIG_ERRMINLIMIT_SHIFT);
-	sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
-		SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
-		sr_errconfig);
-
-	/* Enabling the interrupts if the ERROR module is used */
-	sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st),
-		      vpboundint_en);
-
-	return 0;
-}
-
-/**
- * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * disable the error generator module inside the smartreflex module.
- *
- * Returns 0 on success and error value in case of failure.
- */
-int sr_disable_errgen(struct voltagedomain *voltdm)
-{
-	u32 errconfig_offs;
-	u32 vpboundint_en, vpboundint_st;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
-		return PTR_ERR(sr);
-	}
-
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		errconfig_offs = ERRCONFIG_V1;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
-		break;
-	case SR_TYPE_V2:
-		errconfig_offs = ERRCONFIG_V2;
-		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
-		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Disable the interrupts of ERROR module */
-	sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0);
-
-	/* Disable the Sensor and errorgen */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0);
-
-	return 0;
-}
-
-/**
- * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the
- *			 minmaxavg module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * configure the minmaxavg module inside the smartreflex module.
- * SR settings if using the ERROR module inside Smartreflex.
- * SR CLASS 3 by default uses only the ERROR module where as
- * SR CLASS 2 can choose between ERROR module and MINMAXAVG
- * module. Returns 0 on success and error value in case of failure.
- */
-int sr_configure_minmax(struct voltagedomain *voltdm)
-{
-	u32 sr_config, sr_avgwt;
-	u32 senp_en = 0, senn_en = 0;
-	u8 senp_shift, senn_shift;
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
-		return PTR_ERR(sr);
-	}
-
-	if (!sr->clk_length)
-		sr_set_clk_length(sr);
-
-	senp_en = sr->senp_mod;
-	senn_en = sr->senn_mod;
-
-	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
-		SRCONFIG_SENENABLE |
-		(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
-
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		sr_config |= SRCONFIG_DELAYCTRL;
-		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
-		break;
-	case SR_TYPE_V2:
-		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
-		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
-	sr_write_reg(sr, SRCONFIG, sr_config);
-	sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
-		(sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
-	sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
-
-	/*
-	 * Enabling the interrupts if MINMAXAVG module is used.
-	 * TODO: check if all the interrupts are mandatory
-	 */
-	switch (sr->ip_type) {
-	case SR_TYPE_V1:
-		sr_modify_reg(sr, ERRCONFIG_V1,
-			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
-			ERRCONFIG_MCUBOUNDINTEN),
-			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
-			 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
-			 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
-		break;
-	case SR_TYPE_V2:
-		sr_write_reg(sr, IRQSTATUS,
-			IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
-			IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
-		sr_write_reg(sr, IRQENABLE_SET,
-			IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
-			IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
-		break;
-	default:
-		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
-			"module without specifying the ip\n", __func__);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/**
- * sr_enable() - Enables the smartreflex module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- * @volt:	The voltage at which the Voltage domain associated with
- *		the smartreflex module is operating at.
- *		This is required only to program the correct Ntarget value.
- *
- * This API is to be called from the smartreflex class driver to
- * enable a smartreflex module. Returns 0 on success. Returns error
- * value if the voltage passed is wrong or if ntarget value is wrong.
- */
-int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-	struct omap_sr_nvalue_table *nvalue_row;
-	int ret;
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
-		return PTR_ERR(sr);
-	}
-
-	nvalue_row = sr_retrieve_nvalue_row(sr, volt);
-	if (!nvalue_row) {
-		dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n",
-			 __func__, volt);
-		return -ENODATA;
-	}
-
-
-	/* errminlimit is opp dependent and hence linked to voltage */
-	sr->err_minlimit = nvalue_row->errminlimit;
-
-	pm_runtime_get_sync(&sr->pdev->dev);
-
-	/* Check if SR is already enabled. If yes do nothing */
-	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
-		return 0;
-
-	/* Configure SR */
-	ret = sr_class->configure(sr);
-	if (ret)
-		return ret;
-
-	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
-
-	/* SRCONFIG - enable SR */
-	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
-	return 0;
-}
-
-/**
- * sr_disable() - Disables the smartreflex module.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the smartreflex class driver to
- * disable a smartreflex module.
- */
-void sr_disable(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
-		return;
-	}
-
-	/* Check if SR clocks are already disabled. If yes do nothing */
-	if (pm_runtime_suspended(&sr->pdev->dev))
-		return;
-
-	/*
-	 * Disable SR if only it is indeed enabled. Else just
-	 * disable the clocks.
-	 */
-	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
-		switch (sr->ip_type) {
-		case SR_TYPE_V1:
-			sr_v1_disable(sr);
-			break;
-		case SR_TYPE_V2:
-			sr_v2_disable(sr);
-			break;
-		default:
-			dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n",
-				sr->ip_type);
-		}
-	}
-
-	pm_runtime_put_sync_suspend(&sr->pdev->dev);
-}
-
-/**
- * sr_register_class() - API to register a smartreflex class parameters.
- * @class_data:	The structure containing various sr class specific data.
- *
- * This API is to be called by the smartreflex class driver to register itself
- * with the smartreflex driver during init. Returns 0 on success else the
- * error value.
- */
-int sr_register_class(struct omap_sr_class_data *class_data)
-{
-	struct omap_sr *sr_info;
-
-	if (!class_data) {
-		pr_warning("%s:, Smartreflex class data passed is NULL\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	if (sr_class) {
-		pr_warning("%s: Smartreflex class driver already registered\n",
-			__func__);
-		return -EBUSY;
-	}
-
-	sr_class = class_data;
-
-	/*
-	 * Call into late init to do intializations that require
-	 * both sr driver and sr class driver to be initiallized.
-	 */
-	list_for_each_entry(sr_info, &sr_list, node)
-		sr_late_init(sr_info);
-
-	return 0;
-}
-
-/**
- * omap_sr_enable() -  API to enable SR clocks and to call into the
- *			registered smartreflex class enable API.
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the kernel in order to enable
- * a particular smartreflex module. This API will do the initial
- * configurations to turn on the smartreflex module and in turn call
- * into the registered smartreflex class enable API.
- */
-void omap_sr_enable(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
-		return;
-	}
-
-	if (!sr->autocomp_active)
-		return;
-
-	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
-		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
-			"registered\n", __func__);
-		return;
-	}
-
-	sr_class->enable(sr);
-}
-
-/**
- * omap_sr_disable() - API to disable SR without resetting the voltage
- *			processor voltage
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the kernel in order to disable
- * a particular smartreflex module. This API will in turn call
- * into the registered smartreflex class disable API. This API will tell
- * the smartreflex class disable not to reset the VP voltage after
- * disabling smartreflex.
- */
-void omap_sr_disable(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
-		return;
-	}
-
-	if (!sr->autocomp_active)
-		return;
-
-	if (!sr_class || !(sr_class->disable)) {
-		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
-			"registered\n", __func__);
-		return;
-	}
-
-	sr_class->disable(sr, 0);
-}
-
-/**
- * omap_sr_disable_reset_volt() - API to disable SR and reset the
- *				voltage processor voltage
- * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
- *
- * This API is to be called from the kernel in order to disable
- * a particular smartreflex module. This API will in turn call
- * into the registered smartreflex class disable API. This API will tell
- * the smartreflex class disable to reset the VP voltage after
- * disabling smartreflex.
- */
-void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
-{
-	struct omap_sr *sr = _sr_lookup(voltdm);
-
-	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
-		return;
-	}
-
-	if (!sr->autocomp_active)
-		return;
-
-	if (!sr_class || !(sr_class->disable)) {
-		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
-			"registered\n", __func__);
-		return;
-	}
-
-	sr_class->disable(sr, 1);
-}
-
-/**
- * omap_sr_register_pmic() - API to register pmic specific info.
- * @pmic_data:	The structure containing pmic specific data.
- *
- * This API is to be called from the PMIC specific code to register with
- * smartreflex driver pmic specific info. Currently the only info required
- * is the smartreflex init on the PMIC side.
- */
-void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
-{
-	if (!pmic_data) {
-		pr_warning("%s: Trying to register NULL PMIC data structure"
-			"with smartreflex\n", __func__);
-		return;
-	}
-
-	sr_pmic_data = pmic_data;
-}
-
-/* PM Debug FS entries to enable and disable smartreflex. */
-static int omap_sr_autocomp_show(void *data, u64 *val)
-{
-	struct omap_sr *sr_info = data;
-
-	if (!sr_info) {
-		pr_warning("%s: omap_sr struct not found\n", __func__);
-		return -EINVAL;
-	}
-
-	*val = sr_info->autocomp_active;
-
-	return 0;
-}
-
-static int omap_sr_autocomp_store(void *data, u64 val)
-{
-	struct omap_sr *sr_info = data;
-
-	if (!sr_info) {
-		pr_warning("%s: omap_sr struct not found\n", __func__);
-		return -EINVAL;
-	}
-
-	/* Sanity check */
-	if (val > 1) {
-		pr_warning("%s: Invalid argument %lld\n", __func__, val);
-		return -EINVAL;
-	}
-
-	/* control enable/disable only if there is a delta in value */
-	if (sr_info->autocomp_active != val) {
-		if (!val)
-			sr_stop_vddautocomp(sr_info);
-		else
-			sr_start_vddautocomp(sr_info);
-	}
-
-	return 0;
-}
-
-DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
-			omap_sr_autocomp_store, "%llu\n");
-
-static int __init omap_sr_probe(struct platform_device *pdev)
-{
-	struct omap_sr *sr_info;
-	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct resource *mem, *irq;
-	struct dentry *nvalue_dir;
-	int i, ret = 0;
-
-	sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
-	if (!sr_info) {
-		dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(pdev, sr_info);
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		ret = -EINVAL;
-		goto err_free_devinfo;
-	}
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
-		ret = -ENODEV;
-		goto err_free_devinfo;
-	}
-
-	mem = request_mem_region(mem->start, resource_size(mem),
-					dev_name(&pdev->dev));
-	if (!mem) {
-		dev_err(&pdev->dev, "%s: no mem region\n", __func__);
-		ret = -EBUSY;
-		goto err_free_devinfo;
-	}
-
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_irq_safe(&pdev->dev);
-
-	sr_info->name = kasprintf(GFP_KERNEL, "sr_%s", pdata->name);
-	if (!sr_info->name) {
-		dev_err(&pdev->dev, "%s: Unable to alloc SR instance name\n",
-			__func__);
-		ret = -ENOMEM;
-		goto err_release_region;
-	}
-
-	sr_info->pdev = pdev;
-	sr_info->srid = pdev->id;
-	sr_info->voltdm = pdata->voltdm;
-	sr_info->nvalue_table = pdata->nvalue_table;
-	sr_info->nvalue_count = pdata->nvalue_count;
-	sr_info->senn_mod = pdata->senn_mod;
-	sr_info->senp_mod = pdata->senp_mod;
-	sr_info->autocomp_active = false;
-	sr_info->ip_type = pdata->ip_type;
-	sr_info->base = ioremap(mem->start, resource_size(mem));
-	if (!sr_info->base) {
-		dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
-		ret = -ENOMEM;
-		goto err_release_region;
-	}
-
-	if (irq)
-		sr_info->irq = irq->start;
-
-	sr_set_clk_length(sr_info);
-	sr_set_regfields(sr_info);
-
-	list_add(&sr_info->node, &sr_list);
-
-	/*
-	 * Call into late init to do intializations that require
-	 * both sr driver and sr class driver to be initiallized.
-	 */
-	if (sr_class) {
-		ret = sr_late_init(sr_info);
-		if (ret) {
-			pr_warning("%s: Error in SR late init\n", __func__);
-			goto err_iounmap;
-		}
-	}
-
-	dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
-	if (!sr_dbg_dir) {
-		sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
-		if (IS_ERR_OR_NULL(sr_dbg_dir)) {
-			ret = PTR_ERR(sr_dbg_dir);
-			pr_err("%s:sr debugfs dir creation failed(%d)\n",
-				__func__, ret);
-			goto err_iounmap;
-		}
-	}
-
-	sr_info->dbg_dir = debugfs_create_dir(sr_info->name, sr_dbg_dir);
-	if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
-		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
-			__func__);
-		ret = PTR_ERR(sr_info->dbg_dir);
-		goto err_free_name;
-	}
-
-	(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
-			sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops);
-	(void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_weight);
-	(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_maxlimit);
-
-	nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
-	if (IS_ERR_OR_NULL(nvalue_dir)) {
-		dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
-			"for n-values\n", __func__);
-		ret = PTR_ERR(nvalue_dir);
-		goto err_debugfs;
-	}
-
-	if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
-		dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
-			 __func__, sr_info->name);
-		ret = -ENODATA;
-		goto err_debugfs;
-	}
-
-	for (i = 0; i < sr_info->nvalue_count; i++) {
-		char name[NVALUE_NAME_LEN + 1];
-
-		snprintf(name, sizeof(name), "volt_%lu",
-			 sr_info->nvalue_table[i].volt_nominal);
-		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
-				&(sr_info->nvalue_table[i].nvalue));
-		snprintf(name, sizeof(name), "errminlimit_%lu",
-			 sr_info->nvalue_table[i].volt_nominal);
-		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
-				&(sr_info->nvalue_table[i].errminlimit));
-	}
-
-	return ret;
-
-err_debugfs:
-	debugfs_remove_recursive(sr_info->dbg_dir);
-err_free_name:
-	kfree(sr_info->name);
-err_iounmap:
-	list_del(&sr_info->node);
-	iounmap(sr_info->base);
-err_release_region:
-	release_mem_region(mem->start, resource_size(mem));
-err_free_devinfo:
-	kfree(sr_info);
-
-	return ret;
-}
-
-static int __devexit omap_sr_remove(struct platform_device *pdev)
-{
-	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct omap_sr *sr_info;
-	struct resource *mem;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		return -EINVAL;
-	}
-
-	sr_info = _sr_lookup(pdata->voltdm);
-	if (IS_ERR(sr_info)) {
-		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
-			__func__);
-		return PTR_ERR(sr_info);
-	}
-
-	if (sr_info->autocomp_active)
-		sr_stop_vddautocomp(sr_info);
-	if (sr_info->dbg_dir)
-		debugfs_remove_recursive(sr_info->dbg_dir);
-
-	list_del(&sr_info->node);
-	iounmap(sr_info->base);
-	kfree(sr_info->name);
-	kfree(sr_info);
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(mem->start, resource_size(mem));
-
-	return 0;
-}
-
-static void __devexit omap_sr_shutdown(struct platform_device *pdev)
-{
-	struct omap_sr_data *pdata = pdev->dev.platform_data;
-	struct omap_sr *sr_info;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
-		return;
-	}
-
-	sr_info = _sr_lookup(pdata->voltdm);
-	if (IS_ERR(sr_info)) {
-		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
-			__func__);
-		return;
-	}
-
-	if (sr_info->autocomp_active)
-		sr_stop_vddautocomp(sr_info);
-
-	return;
-}
-
-static struct platform_driver smartreflex_driver = {
-	.remove         = __devexit_p(omap_sr_remove),
-	.shutdown	= __devexit_p(omap_sr_shutdown),
-	.driver		= {
-		.name	= "smartreflex",
-	},
-};
-
-static int __init sr_init(void)
-{
-	int ret = 0;
-
-	/*
-	 * sr_init is a late init. If by then a pmic specific API is not
-	 * registered either there is no need for anything to be done on
-	 * the PMIC side or somebody has forgotten to register a PMIC
-	 * handler. Warn for the second condition.
-	 */
-	if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
-		sr_pmic_data->sr_pmic_init();
-	else
-		pr_warning("%s: No PMIC hook to init smartreflex\n", __func__);
-
-	ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
-	if (ret) {
-		pr_err("%s: platform driver register failed for SR\n",
-			__func__);
-		return ret;
-	}
-
-	return 0;
-}
-late_initcall(sr_init);
-
-static void __exit sr_exit(void)
-{
-	platform_driver_unregister(&smartreflex_driver);
-}
-module_exit(sr_exit);
-
-MODULE_DESCRIPTION("OMAP Smartreflex Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" DRIVER_NAME);
-MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
deleted file mode 100644
index dbfb554..0000000
--- a/arch/arm/mach-omap2/smartreflex.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * OMAP Smartreflex Defines and Routines
- *
- * Author: Thara Gopinath	<thara@xxxxxx>
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- * Thara Gopinath <thara@xxxxxx>
- *
- * Copyright (C) 2008 Nokia Corporation
- * Kalle Jokiniemi
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Lesly A M <x0080970@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __DRIVERS_POWER_AVS_SMARTREFLEX_H
-#define __DRIVERS_POWER_AVS_SMARTREFLEX_H
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <plat/smartreflex.h>
-#include <plat/voltage.h>
-
-/*
- * Different Smartreflex IPs version. The v1 is the 65nm version used in
- * OMAP3430. The v2 is the update for the 45nm version of the IP
- * used in OMAP3630 and OMAP4430
- */
-#define SR_TYPE_V1	1
-#define SR_TYPE_V2	2
-
-/* SMART REFLEX REG ADDRESS OFFSET */
-#define SRCONFIG		0x00
-#define SRSTATUS		0x04
-#define SENVAL			0x08
-#define SENMIN			0x0C
-#define SENMAX			0x10
-#define SENAVG			0x14
-#define AVGWEIGHT		0x18
-#define NVALUERECIPROCAL	0x1c
-#define SENERROR_V1		0x20
-#define ERRCONFIG_V1		0x24
-#define IRQ_EOI			0x20
-#define IRQSTATUS_RAW		0x24
-#define IRQSTATUS		0x28
-#define IRQENABLE_SET		0x2C
-#define IRQENABLE_CLR		0x30
-#define SENERROR_V2		0x34
-#define ERRCONFIG_V2		0x38
-
-/* Bit/Shift Positions */
-
-/* SRCONFIG */
-#define SRCONFIG_ACCUMDATA_SHIFT	22
-#define SRCONFIG_SRCLKLENGTH_SHIFT	12
-#define SRCONFIG_SENNENABLE_V1_SHIFT	5
-#define SRCONFIG_SENPENABLE_V1_SHIFT	3
-#define SRCONFIG_SENNENABLE_V2_SHIFT	1
-#define SRCONFIG_SENPENABLE_V2_SHIFT	0
-#define SRCONFIG_CLKCTRL_SHIFT		0
-
-#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
-
-#define SRCONFIG_SRENABLE		BIT(11)
-#define SRCONFIG_SENENABLE		BIT(10)
-#define SRCONFIG_ERRGEN_EN		BIT(9)
-#define SRCONFIG_MINMAXAVG_EN		BIT(8)
-#define SRCONFIG_DELAYCTRL		BIT(2)
-
-/* AVGWEIGHT */
-#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
-#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
-
-/* NVALUERECIPROCAL */
-#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
-#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
-#define NVALUERECIPROCAL_RNSENP_SHIFT	8
-#define NVALUERECIPROCAL_RNSENN_SHIFT	0
-
-/* ERRCONFIG */
-#define ERRCONFIG_ERRWEIGHT_SHIFT	16
-#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
-#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
-
-#define SR_ERRWEIGHT_MASK		(0x07 << 16)
-#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
-#define SR_ERRMINLIMIT_MASK		(0xff << 0)
-
-#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
-#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
-#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
-#define ERRCONFIG_MCUACCUMINTST		BIT(28)
-#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
-#define ERRCONFIG_MCUVALIDINTST		BIT(26)
-#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
-#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
-#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
-#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
-#define ERRCONFIG_MCUDISACKINTST	BIT(22)
-#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
-
-#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
-					ERRCONFIG_MCUACCUMINTST | \
-					ERRCONFIG_MCUVALIDINTST | \
-					ERRCONFIG_MCUBOUNDINTST | \
-					ERRCONFIG_MCUDISACKINTST)
-/* IRQSTATUS */
-#define IRQSTATUS_MCUACCUMINT		BIT(3)
-#define IRQSTATUS_MCVALIDINT		BIT(2)
-#define IRQSTATUS_MCBOUNDSINT		BIT(1)
-#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
-
-/* IRQENABLE_SET and IRQENABLE_CLEAR */
-#define IRQENABLE_MCUACCUMINT		BIT(3)
-#define IRQENABLE_MCUVALIDINT		BIT(2)
-#define IRQENABLE_MCUBOUNDSINT		BIT(1)
-#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
-
-/* Common Bit values */
-
-#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
-#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
-#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
-#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
-#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
-
-/*
- * 3430 specific values. Maybe these should be passed from board file or
- * pmic structures.
- */
-#define OMAP3430_SR_ACCUMDATA		0x1f4
-
-#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
-#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
-
-#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
-#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
-
-#define OMAP3430_SR_ERRWEIGHT		0x04
-#define OMAP3430_SR_ERRMAXLIMIT		0x02
-
-/**
- * test_cond_timeout - busy-loop, testing a condition
- * @cond: condition to test until it evaluates to true
- * @timeout: maximum number of microseconds in the timeout
- * @index: loop index (integer)
- *
- * Loop waiting for @cond to become true or until at least @timeout
- * microseconds have passed.  To use, define some integer @index in the
- * calling code.  After running, if @index == @timeout, then the loop has
- * timed out.
- *
- * Copied from omap_test_timeout
- */
-#define sr_test_cond_timeout(cond, timeout, index)		\
-({								\
-	for (index = 0; index < timeout; index++) {		\
-		if (cond)					\
-			break;					\
-		udelay(1);					\
-	}							\
-})
-
-/**
- * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
- *				pmic specific info to smartreflex driver
- *
- * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
- */
-struct omap_sr_pmic_data {
-	void (*sr_pmic_init) (void);
-};
-
-
-#ifdef CONFIG_POWER_AVS_OMAP
-/*
- * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
- * The smartreflex class driver should pass the class type.
- * Should be used to populate the class_type field of the
- * omap_smartreflex_class_data structure.
- */
-#define SR_CLASS1	0x1
-#define SR_CLASS2	0x2
-#define SR_CLASS3	0x3
-
-/**
- * struct omap_sr_class_data - Smartreflex class driver info
- *
- * @enable:		API to enable a particular class smaartreflex.
- * @disable:		API to disable a particular class smartreflex.
- * @configure:		API to configure a particular class smartreflex.
- * @notify:		API to notify the class driver about an event in SR.
- *			Not needed for class3.
- * @notify_flags:	specify the events to be notified to the class driver
- * @class_type:		specify which smartreflex class.
- *			Can be used by the SR driver to take any class
- *			based decisions.
- */
-struct omap_sr_class_data {
-	int (*enable)(struct omap_sr *sr);
-	int (*disable)(struct omap_sr *sr, int is_volt_reset);
-	int (*configure)(struct omap_sr *sr);
-	int (*notify)(struct omap_sr *sr, u32 status);
-	u8 notify_flags;
-	u8 class_type;
-};
-
-/* Smartreflex module enable/disable interface */
-void omap_sr_enable(struct voltagedomain *voltdm);
-void omap_sr_disable(struct voltagedomain *voltdm);
-void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
-
-/* API to register the pmic specific data with the smartreflex driver. */
-void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
-
-/* Smartreflex driver hooks to be called from Smartreflex class driver */
-int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
-void sr_disable(struct voltagedomain *voltdm);
-int sr_configure_errgen(struct voltagedomain *voltdm);
-int sr_disable_errgen(struct voltagedomain *voltdm);
-int sr_configure_minmax(struct voltagedomain *voltdm);
-
-/* API to register the smartreflex class driver with the smartreflex driver */
-int sr_register_class(struct omap_sr_class_data *class_data);
-#else
-static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
-static inline void omap_sr_disable_reset_volt(
-		struct voltagedomain *voltdm) {}
-static inline void omap_sr_register_pmic(
-		struct omap_sr_pmic_data *pmic_data) {}
-#endif
-#endif
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 6ec9237..80dfb22 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -44,52 +44,6 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS_CLASS
 
-menuconfig POWER_AVS
-	tristate "Adaptive Voltage Scaling class support"
-	help
-	  AVS is a power management technique which finely controls the
-	  operating voltage of a device in order to optimize (i.e. reduce)
-	  its power consumption.
-	  At a given operating point the voltage is adapted depending on
-	  static factors (chip manufacturing process) and dynamic factors
-	  (temperature depending performance).
-	  AVS is also called SmartReflex on OMAP devices.
-
-	  Say Y here to enable Adaptive Voltage Scaling class support.
-
-if POWER_AVS
-
-config POWER_AVS_OMAP
-	bool "AVS support for the OMAP IP versions 1&2"
-	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
-	help
-	  Say Y to enable AVS support on OMAP containing the version 1 or
-	  version 2 of the SmartReflex IP.
-	  V1 is the 65nm version used in OMAP3430.
-	  V2 is the update for the 45nm version of the IP used in OMAP3630
-	  and OMAP4430
-
-	  Please note, that by default SmartReflex is only
-	  initialized and not enabled. To enable the automatic voltage
-	  compensation for vdd mpu and vdd core from user space,
-	  user must write 1 to
-		/debug/smartreflex/sr_<X>/autocomp,
-	  where X is mpu_iva or core for OMAP3.
-	  Optionally autocompensation can be enabled in the kernel
-	  by default during system init via the enable_on_init flag
-	  which an be passed as platform data to the smartreflex driver.
-
-config POWER_AVS_OMAP_CLASS3
-	bool "Class 3 mode of Smartreflex Implementation"
-	depends on POWER_AVS_OMAP && TWL4030_CORE
-	help
-	  Say Y to enable Class 3 implementation of Smartreflex
-
-	  Class 3 implementation of Smartreflex employs continuous hardware
-	  voltage calibration.
-
-endif # POWER_AVS
-
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 3a8daf8..06f991e 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -275,3 +275,5 @@ config CHARGER_MAX8998
 	  platform data of MAX8998/LP3974 PMICs.
 
 endif # POWER_SUPPLY
+
+source "drivers/power/avs/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index e429008..e4a8fd2 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -41,3 +41,5 @@ obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
+
+obj-$(CONFIG_POWER_AVS)		+= avs/
diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
new file mode 100644
index 0000000..35b21c4
--- /dev/null
+++ b/drivers/power/avs/Kconfig
@@ -0,0 +1,45 @@
+menuconfig POWER_AVS
+	tristate "Adaptive Voltage Scaling class support"
+	help
+	  AVS is a power management technique which finely controls the
+	  operating voltage of a device in order to optimize (i.e. reduce)
+	  its power consumption.
+	  At a given operating point the voltage is adapted depending on
+	  static factors (chip manufacturing process) and dynamic factors
+	  (temperature depending performance).
+	  AVS is also called SmartReflex on OMAP devices.
+
+	  Say Y here to enable Adaptive Voltage Scaling class support.
+
+if POWER_AVS
+
+config POWER_AVS_OMAP
+	bool "AVS support for the OMAP IP versions 1&2"
+	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+	help
+	  Say Y to enable AVS support on OMAP containing the version 1 or
+	  version 2 of the SmartReflex IP.
+	  V1 is the 65nm version used in OMAP3430.
+	  V2 is the update for the 45nm version of the IP used in OMAP3630
+	  and OMAP4430
+
+	  Please note, that by default SmartReflex is only
+	  initialized and not enabled. To enable the automatic voltage
+	  compensation for vdd mpu and vdd core from user space,
+	  user must write 1 to
+		/debug/smartreflex/sr_<X>/autocomp,
+	  where X is mpu_iva or core for OMAP3.
+	  Optionally autocompensation can be enabled in the kernel
+	  by default during system init via the enable_on_init flag
+	  which an be passed as platform data to the smartreflex driver.
+
+config POWER_AVS_OMAP_CLASS3
+	bool "Class 3 mode of Smartreflex Implementation"
+	depends on POWER_AVS_OMAP && TWL4030_CORE
+	help
+	  Say Y to enable Class 3 implementation of Smartreflex
+
+	  Class 3 implementation of Smartreflex employs continuous hardware
+	  voltage calibration.
+
+endif # POWER_AVS
diff --git a/drivers/power/avs/Makefile b/drivers/power/avs/Makefile
new file mode 100644
index 0000000..ac72ec5
--- /dev/null
+++ b/drivers/power/avs/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_POWER_AVS_OMAP)		+= smartreflex.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)	+= smartreflex-class3.o
diff --git a/drivers/power/avs/smartreflex-class3.c b/drivers/power/avs/smartreflex-class3.c
new file mode 100644
index 0000000..9a19ce7
--- /dev/null
+++ b/drivers/power/avs/smartreflex-class3.c
@@ -0,0 +1,60 @@
+/*
+ * Smart reflex Class 3 specific implementations
+ *
+ * Author: Thara Gopinath       <thara@xxxxxx>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "smartreflex.h"
+
+static int sr_class3_enable(struct omap_sr *sr)
+{
+	unsigned long volt = voltdm_get_voltage(sr->voltdm);
+
+	if (!volt) {
+		pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
+				__func__, sr->name);
+		return -ENODATA;
+	}
+
+	omap_vp_enable(sr->voltdm);
+	return sr_enable(sr->voltdm, volt);
+}
+
+static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
+{
+	sr_disable_errgen(sr->voltdm);
+	omap_vp_disable(sr->voltdm);
+	sr_disable(sr->voltdm);
+	if (is_volt_reset)
+		voltdm_reset(sr->voltdm);
+
+	return 0;
+}
+
+static int sr_class3_configure(struct omap_sr *sr)
+{
+	return sr_configure_errgen(sr->voltdm);
+}
+
+/* SR class3 structure */
+static struct omap_sr_class_data class3_data = {
+	.enable = sr_class3_enable,
+	.disable = sr_class3_disable,
+	.configure = sr_class3_configure,
+	.class_type = SR_CLASS3,
+};
+
+/* Smartreflex Class3 init API to be called from board file */
+static int __init sr_class3_init(void)
+{
+	pr_info("SmartReflex Class3 initialized\n");
+	return sr_register_class(&class3_data);
+}
+late_initcall(sr_class3_init);
diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c
new file mode 100644
index 0000000..cd751ef
--- /dev/null
+++ b/drivers/power/avs/smartreflex.c
@@ -0,0 +1,1117 @@
+/*
+ * OMAP SmartReflex Voltage Control
+ *
+ * Author: Thara Gopinath	<thara@xxxxxx>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@xxxxxx>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#include "smartreflex.h"
+
+#define SMARTREFLEX_NAME_LEN	16
+#define NVALUE_NAME_LEN		40
+#define SR_DISABLE_TIMEOUT	200
+
+/* sr_list contains all the instances of smartreflex module */
+static LIST_HEAD(sr_list);
+
+static struct omap_sr_class_data *sr_class;
+static struct omap_sr_pmic_data *sr_pmic_data;
+static struct dentry		*sr_dbg_dir;
+
+static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
+{
+	__raw_writel(value, (sr->base + offset));
+}
+
+static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
+					u32 value)
+{
+	u32 reg_val;
+
+	/*
+	 * Smartreflex error config register is special as it contains
+	 * certain status bits which if written a 1 into means a clear
+	 * of those bits. So in order to make sure no accidental write of
+	 * 1 happens to those status bits, do a clear of them in the read
+	 * value. This mean this API doesn't rewrite values in these bits
+	 * if they are currently set, but does allow the caller to write
+	 * those bits.
+	 */
+	if (sr->ip_type == SR_TYPE_V1 && offset == ERRCONFIG_V1)
+		mask |= ERRCONFIG_STATUS_V1_MASK;
+	else if (sr->ip_type == SR_TYPE_V2 && offset == ERRCONFIG_V2)
+		mask |= ERRCONFIG_VPBOUNDINTST_V2;
+
+	reg_val = __raw_readl(sr->base + offset);
+	reg_val &= ~mask;
+
+	value &= mask;
+
+	reg_val |= value;
+
+	__raw_writel(reg_val, (sr->base + offset));
+}
+
+static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
+{
+	return __raw_readl(sr->base + offset);
+}
+
+static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr_info;
+
+	if (!voltdm) {
+		pr_err("%s: Null voltage domain passed!\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	list_for_each_entry(sr_info, &sr_list, node) {
+		if (voltdm == sr_info->voltdm)
+			return sr_info;
+	}
+
+	return ERR_PTR(-ENODATA);
+}
+
+static irqreturn_t sr_interrupt(int irq, void *data)
+{
+	struct omap_sr *sr_info = data;
+	u32 status = 0;
+
+	switch (sr_info->ip_type) {
+	case SR_TYPE_V1:
+		/* Read the status bits */
+		status = sr_read_reg(sr_info, ERRCONFIG_V1);
+
+		/* Clear them by writing back */
+		sr_write_reg(sr_info, ERRCONFIG_V1, status);
+		break;
+	case SR_TYPE_V2:
+		/* Read the status bits */
+		status = sr_read_reg(sr_info, IRQSTATUS);
+
+		/* Clear them by writing back */
+		sr_write_reg(sr_info, IRQSTATUS, status);
+		break;
+	default:
+		dev_err(&sr_info->pdev->dev, "UNKNOWN IP type %d\n",
+			sr_info->ip_type);
+		return IRQ_NONE;
+	}
+
+	if (sr_class->notify)
+		sr_class->notify(sr_info, status);
+
+	return IRQ_HANDLED;
+}
+
+static void sr_set_clk_length(struct omap_sr *sr)
+{
+	struct clk *sys_ck;
+	u32 sys_clk_speed;
+
+	if (cpu_is_omap34xx())
+		sys_ck = clk_get(NULL, "sys_ck");
+	else
+		sys_ck = clk_get(NULL, "sys_clkin_ck");
+
+	if (IS_ERR(sys_ck)) {
+		dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
+			__func__);
+		return;
+	}
+
+	sys_clk_speed = clk_get_rate(sys_ck);
+	clk_put(sys_ck);
+
+	switch (sys_clk_speed) {
+	case 12000000:
+		sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
+		break;
+	case 13000000:
+		sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
+		break;
+	case 19200000:
+		sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
+		break;
+	case 26000000:
+		sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
+		break;
+	case 38400000:
+		sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n",
+			__func__, sys_clk_speed);
+		break;
+	}
+}
+
+static void sr_set_regfields(struct omap_sr *sr)
+{
+	/*
+	 * For time being these values are defined in smartreflex.h
+	 * and populated during init. May be they can be moved to board
+	 * file or pmic specific data structure. In that case these structure
+	 * fields will have to be populated using the pdata or pmic structure.
+	 */
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		sr->err_weight = OMAP3430_SR_ERRWEIGHT;
+		sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
+		sr->accum_data = OMAP3430_SR_ACCUMDATA;
+		if (!(strcmp(sr->name, "sr_mpu_iva"))) {
+			sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
+			sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
+		} else {
+			sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
+			sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
+		}
+	}
+}
+
+static void sr_start_vddautocomp(struct omap_sr *sr)
+{
+	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
+		dev_warn(&sr->pdev->dev,
+			"%s: smartreflex class driver not registered\n",
+			__func__);
+		return;
+	}
+
+	if (!sr_class->enable(sr))
+		sr->autocomp_active = true;
+}
+
+static void sr_stop_vddautocomp(struct omap_sr *sr)
+{
+	if (!sr_class || !(sr_class->disable)) {
+		dev_warn(&sr->pdev->dev,
+			"%s: smartreflex class driver not registered\n",
+			__func__);
+		return;
+	}
+
+	if (sr->autocomp_active) {
+		sr_class->disable(sr, 1);
+		sr->autocomp_active = false;
+	}
+}
+
+/*
+ * This function handles the intializations which have to be done
+ * only when both sr device and class driver regiter has
+ * completed. This will be attempted to be called from both sr class
+ * driver register and sr device intializtion API's. Only one call
+ * will ultimately succeed.
+ *
+ * Currently this function registers interrupt handler for a particular SR
+ * if smartreflex class driver is already registered and has
+ * requested for interrupts and the SR interrupt line in present.
+ */
+static int sr_late_init(struct omap_sr *sr_info)
+{
+	struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
+	struct resource *mem;
+	int ret = 0;
+
+	if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
+		ret = request_irq(sr_info->irq, sr_interrupt,
+				  0, sr_info->name, sr_info);
+		if (ret)
+			goto error;
+		disable_irq(sr_info->irq);
+	}
+
+	if (pdata && pdata->enable_on_init)
+		sr_start_vddautocomp(sr_info);
+
+	return ret;
+
+error:
+	iounmap(sr_info->base);
+	mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem->start, resource_size(mem));
+	list_del(&sr_info->node);
+	dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
+		"interrupt handler. Smartreflex will"
+		"not function as desired\n", __func__);
+	kfree(sr_info);
+
+	return ret;
+}
+
+static void sr_v1_disable(struct omap_sr *sr)
+{
+	int timeout = 0;
+	int errconf_val = ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
+			ERRCONFIG_MCUBOUNDINTST;
+
+	/* Enable MCUDisableAcknowledge interrupt */
+	sr_modify_reg(sr, ERRCONFIG_V1,
+			ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
+
+	/* SRCONFIG - disable SR */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
+
+	/* Disable all other SR interrupts and clear the status as needed */
+	if (sr_read_reg(sr, ERRCONFIG_V1) & ERRCONFIG_VPBOUNDINTST_V1)
+		errconf_val |= ERRCONFIG_VPBOUNDINTST_V1;
+	sr_modify_reg(sr, ERRCONFIG_V1,
+			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
+			ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
+			errconf_val);
+
+	/*
+	 * Wait for SR to be disabled.
+	 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
+	 */
+	sr_test_cond_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
+			     ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
+			     timeout);
+
+	if (timeout >= SR_DISABLE_TIMEOUT)
+		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
+			__func__);
+
+	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
+	sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
+			ERRCONFIG_MCUDISACKINTST);
+}
+
+static void sr_v2_disable(struct omap_sr *sr)
+{
+	int timeout = 0;
+
+	/* Enable MCUDisableAcknowledge interrupt */
+	sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
+
+	/* SRCONFIG - disable SR */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
+
+	/*
+	 * Disable all other SR interrupts and clear the status
+	 * write to status register ONLY on need basis - only if status
+	 * is set.
+	 */
+	if (sr_read_reg(sr, ERRCONFIG_V2) & ERRCONFIG_VPBOUNDINTST_V2)
+		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+			ERRCONFIG_VPBOUNDINTST_V2);
+	else
+		sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+				0x0);
+	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
+			IRQENABLE_MCUVALIDINT |
+			IRQENABLE_MCUBOUNDSINT));
+	sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
+			IRQSTATUS_MCVALIDINT |
+			IRQSTATUS_MCBOUNDSINT));
+
+	/*
+	 * Wait for SR to be disabled.
+	 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
+	 */
+	sr_test_cond_timeout((sr_read_reg(sr, IRQSTATUS) &
+			     IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
+			     timeout);
+
+	if (timeout >= SR_DISABLE_TIMEOUT)
+		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
+			__func__);
+
+	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
+	sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
+	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
+}
+
+static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
+				struct omap_sr *sr,
+				unsigned long volt_nominal)
+{
+	int i;
+
+	if (!sr->nvalue_table) {
+		dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
+			__func__);
+		return NULL;
+	}
+
+	for (i = 0; i < sr->nvalue_count; i++) {
+		if (sr->nvalue_table[i].volt_nominal == volt_nominal)
+			return &sr->nvalue_table[i];
+	}
+
+	return NULL;
+}
+
+/* Public Functions */
+
+/**
+ * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
+ *			 error generator module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * configure the error generator module inside the smartreflex module.
+ * SR settings if using the ERROR module inside Smartreflex.
+ * SR CLASS 3 by default uses only the ERROR module where as
+ * SR CLASS 2 can choose between ERROR module and MINMAXAVG
+ * module. Returns 0 on success and error value in case of failure.
+ */
+int sr_configure_errgen(struct voltagedomain *voltdm)
+{
+	u32 sr_config, sr_errconfig, errconfig_offs;
+	u32 vpboundint_en, vpboundint_st;
+	u32 senp_en = 0, senn_en = 0;
+	u8 senp_shift, senn_shift;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
+		return PTR_ERR(sr);
+	}
+
+	if (!sr->clk_length)
+		sr_set_clk_length(sr);
+
+	senp_en = sr->senp_mod;
+	senn_en = sr->senn_mod;
+
+	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+		SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
+
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
+		sr_config |= SRCONFIG_DELAYCTRL;
+		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
+		errconfig_offs = ERRCONFIG_V1;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
+		break;
+	case SR_TYPE_V2:
+		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
+		errconfig_offs = ERRCONFIG_V2;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
+	}
+
+	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
+	sr_write_reg(sr, SRCONFIG, sr_config);
+	sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
+		(sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
+		(sr->err_minlimit <<  ERRCONFIG_ERRMINLIMIT_SHIFT);
+	sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
+		SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
+		sr_errconfig);
+
+	/* Enabling the interrupts if the ERROR module is used */
+	sr_modify_reg(sr, errconfig_offs, (vpboundint_en | vpboundint_st),
+		      vpboundint_en);
+
+	return 0;
+}
+
+/**
+ * sr_disable_errgen() - Disables SmartReflex AVS module's errgen component
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * disable the error generator module inside the smartreflex module.
+ *
+ * Returns 0 on success and error value in case of failure.
+ */
+int sr_disable_errgen(struct voltagedomain *voltdm)
+{
+	u32 errconfig_offs;
+	u32 vpboundint_en, vpboundint_st;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
+		return PTR_ERR(sr);
+	}
+
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
+		errconfig_offs = ERRCONFIG_V1;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
+		break;
+	case SR_TYPE_V2:
+		errconfig_offs = ERRCONFIG_V2;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Disable the interrupts of ERROR module */
+	sr_modify_reg(sr, errconfig_offs, vpboundint_en | vpboundint_st, 0);
+
+	/* Disable the Sensor and errorgen */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN, 0);
+
+	return 0;
+}
+
+/**
+ * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the
+ *			 minmaxavg module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * configure the minmaxavg module inside the smartreflex module.
+ * SR settings if using the ERROR module inside Smartreflex.
+ * SR CLASS 3 by default uses only the ERROR module where as
+ * SR CLASS 2 can choose between ERROR module and MINMAXAVG
+ * module. Returns 0 on success and error value in case of failure.
+ */
+int sr_configure_minmax(struct voltagedomain *voltdm)
+{
+	u32 sr_config, sr_avgwt;
+	u32 senp_en = 0, senn_en = 0;
+	u8 senp_shift, senn_shift;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
+		return PTR_ERR(sr);
+	}
+
+	if (!sr->clk_length)
+		sr_set_clk_length(sr);
+
+	senp_en = sr->senp_mod;
+	senn_en = sr->senn_mod;
+
+	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+		SRCONFIG_SENENABLE |
+		(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
+
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
+		sr_config |= SRCONFIG_DELAYCTRL;
+		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
+		break;
+	case SR_TYPE_V2:
+		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
+	}
+
+	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
+	sr_write_reg(sr, SRCONFIG, sr_config);
+	sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
+		(sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
+	sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
+
+	/*
+	 * Enabling the interrupts if MINMAXAVG module is used.
+	 * TODO: check if all the interrupts are mandatory
+	 */
+	switch (sr->ip_type) {
+	case SR_TYPE_V1:
+		sr_modify_reg(sr, ERRCONFIG_V1,
+			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
+			ERRCONFIG_MCUBOUNDINTEN),
+			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
+			 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
+			 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
+		break;
+	case SR_TYPE_V2:
+		sr_write_reg(sr, IRQSTATUS,
+			IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
+			IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
+		sr_write_reg(sr, IRQENABLE_SET,
+			IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
+			IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * sr_enable() - Enables the smartreflex module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ * @volt:	The voltage at which the Voltage domain associated with
+ *		the smartreflex module is operating at.
+ *		This is required only to program the correct Ntarget value.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * enable a smartreflex module. Returns 0 on success. Returns error
+ * value if the voltage passed is wrong or if ntarget value is wrong.
+ */
+int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+	struct omap_sr_nvalue_table *nvalue_row;
+	int ret;
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
+		return PTR_ERR(sr);
+	}
+
+	nvalue_row = sr_retrieve_nvalue_row(sr, volt);
+	if (!nvalue_row) {
+		dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n",
+			 __func__, volt);
+		return -ENODATA;
+	}
+
+
+	/* errminlimit is opp dependent and hence linked to voltage */
+	sr->err_minlimit = nvalue_row->errminlimit;
+
+	pm_runtime_get_sync(&sr->pdev->dev);
+
+	/* Check if SR is already enabled. If yes do nothing */
+	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
+		return 0;
+
+	/* Configure SR */
+	ret = sr_class->configure(sr);
+	if (ret)
+		return ret;
+
+	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
+
+	/* SRCONFIG - enable SR */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
+	return 0;
+}
+
+/**
+ * sr_disable() - Disables the smartreflex module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * disable a smartreflex module.
+ */
+void sr_disable(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
+		return;
+	}
+
+	/* Check if SR clocks are already disabled. If yes do nothing */
+	if (pm_runtime_suspended(&sr->pdev->dev))
+		return;
+
+	/*
+	 * Disable SR if only it is indeed enabled. Else just
+	 * disable the clocks.
+	 */
+	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
+		switch (sr->ip_type) {
+		case SR_TYPE_V1:
+			sr_v1_disable(sr);
+			break;
+		case SR_TYPE_V2:
+			sr_v2_disable(sr);
+			break;
+		default:
+			dev_err(&sr->pdev->dev, "UNKNOWN IP type %d\n",
+				sr->ip_type);
+		}
+	}
+
+	pm_runtime_put_sync_suspend(&sr->pdev->dev);
+}
+
+/**
+ * sr_register_class() - API to register a smartreflex class parameters.
+ * @class_data:	The structure containing various sr class specific data.
+ *
+ * This API is to be called by the smartreflex class driver to register itself
+ * with the smartreflex driver during init. Returns 0 on success else the
+ * error value.
+ */
+int sr_register_class(struct omap_sr_class_data *class_data)
+{
+	struct omap_sr *sr_info;
+
+	if (!class_data) {
+		pr_warning("%s:, Smartreflex class data passed is NULL\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (sr_class) {
+		pr_warning("%s: Smartreflex class driver already registered\n",
+			__func__);
+		return -EBUSY;
+	}
+
+	sr_class = class_data;
+
+	/*
+	 * Call into late init to do intializations that require
+	 * both sr driver and sr class driver to be initiallized.
+	 */
+	list_for_each_entry(sr_info, &sr_list, node)
+		sr_late_init(sr_info);
+
+	return 0;
+}
+
+/**
+ * omap_sr_enable() -  API to enable SR clocks and to call into the
+ *			registered smartreflex class enable API.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to enable
+ * a particular smartreflex module. This API will do the initial
+ * configurations to turn on the smartreflex module and in turn call
+ * into the registered smartreflex class enable API.
+ */
+void omap_sr_enable(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
+		return;
+	}
+
+	if (!sr->autocomp_active)
+		return;
+
+	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
+		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
+			"registered\n", __func__);
+		return;
+	}
+
+	sr_class->enable(sr);
+}
+
+/**
+ * omap_sr_disable() - API to disable SR without resetting the voltage
+ *			processor voltage
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to disable
+ * a particular smartreflex module. This API will in turn call
+ * into the registered smartreflex class disable API. This API will tell
+ * the smartreflex class disable not to reset the VP voltage after
+ * disabling smartreflex.
+ */
+void omap_sr_disable(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
+		return;
+	}
+
+	if (!sr->autocomp_active)
+		return;
+
+	if (!sr_class || !(sr_class->disable)) {
+		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
+			"registered\n", __func__);
+		return;
+	}
+
+	sr_class->disable(sr, 0);
+}
+
+/**
+ * omap_sr_disable_reset_volt() - API to disable SR and reset the
+ *				voltage processor voltage
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to disable
+ * a particular smartreflex module. This API will in turn call
+ * into the registered smartreflex class disable API. This API will tell
+ * the smartreflex class disable to reset the VP voltage after
+ * disabling smartreflex.
+ */
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
+		return;
+	}
+
+	if (!sr->autocomp_active)
+		return;
+
+	if (!sr_class || !(sr_class->disable)) {
+		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
+			"registered\n", __func__);
+		return;
+	}
+
+	sr_class->disable(sr, 1);
+}
+
+/**
+ * omap_sr_register_pmic() - API to register pmic specific info.
+ * @pmic_data:	The structure containing pmic specific data.
+ *
+ * This API is to be called from the PMIC specific code to register with
+ * smartreflex driver pmic specific info. Currently the only info required
+ * is the smartreflex init on the PMIC side.
+ */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
+{
+	if (!pmic_data) {
+		pr_warning("%s: Trying to register NULL PMIC data structure"
+			"with smartreflex\n", __func__);
+		return;
+	}
+
+	sr_pmic_data = pmic_data;
+}
+
+/* PM Debug FS entries to enable and disable smartreflex. */
+static int omap_sr_autocomp_show(void *data, u64 *val)
+{
+	struct omap_sr *sr_info = data;
+
+	if (!sr_info) {
+		pr_warning("%s: omap_sr struct not found\n", __func__);
+		return -EINVAL;
+	}
+
+	*val = sr_info->autocomp_active;
+
+	return 0;
+}
+
+static int omap_sr_autocomp_store(void *data, u64 val)
+{
+	struct omap_sr *sr_info = data;
+
+	if (!sr_info) {
+		pr_warning("%s: omap_sr struct not found\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Sanity check */
+	if (val > 1) {
+		pr_warning("%s: Invalid argument %lld\n", __func__, val);
+		return -EINVAL;
+	}
+
+	/* control enable/disable only if there is a delta in value */
+	if (sr_info->autocomp_active != val) {
+		if (!val)
+			sr_stop_vddautocomp(sr_info);
+		else
+			sr_start_vddautocomp(sr_info);
+	}
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
+			omap_sr_autocomp_store, "%llu\n");
+
+static int __init omap_sr_probe(struct platform_device *pdev)
+{
+	struct omap_sr *sr_info;
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct resource *mem, *irq;
+	struct dentry *nvalue_dir;
+	int i, ret = 0;
+
+	sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
+	if (!sr_info) {
+		dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, sr_info);
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		ret = -EINVAL;
+		goto err_free_devinfo;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
+		ret = -ENODEV;
+		goto err_free_devinfo;
+	}
+
+	mem = request_mem_region(mem->start, resource_size(mem),
+					dev_name(&pdev->dev));
+	if (!mem) {
+		dev_err(&pdev->dev, "%s: no mem region\n", __func__);
+		ret = -EBUSY;
+		goto err_free_devinfo;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_irq_safe(&pdev->dev);
+
+	sr_info->name = kasprintf(GFP_KERNEL, "sr_%s", pdata->name);
+	if (!sr_info->name) {
+		dev_err(&pdev->dev, "%s: Unable to alloc SR instance name\n",
+			__func__);
+		ret = -ENOMEM;
+		goto err_release_region;
+	}
+
+	sr_info->pdev = pdev;
+	sr_info->srid = pdev->id;
+	sr_info->voltdm = pdata->voltdm;
+	sr_info->nvalue_table = pdata->nvalue_table;
+	sr_info->nvalue_count = pdata->nvalue_count;
+	sr_info->senn_mod = pdata->senn_mod;
+	sr_info->senp_mod = pdata->senp_mod;
+	sr_info->autocomp_active = false;
+	sr_info->ip_type = pdata->ip_type;
+	sr_info->base = ioremap(mem->start, resource_size(mem));
+	if (!sr_info->base) {
+		dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
+		ret = -ENOMEM;
+		goto err_release_region;
+	}
+
+	if (irq)
+		sr_info->irq = irq->start;
+
+	sr_set_clk_length(sr_info);
+	sr_set_regfields(sr_info);
+
+	list_add(&sr_info->node, &sr_list);
+
+	/*
+	 * Call into late init to do intializations that require
+	 * both sr driver and sr class driver to be initiallized.
+	 */
+	if (sr_class) {
+		ret = sr_late_init(sr_info);
+		if (ret) {
+			pr_warning("%s: Error in SR late init\n", __func__);
+			goto err_iounmap;
+		}
+	}
+
+	dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
+	if (!sr_dbg_dir) {
+		sr_dbg_dir = debugfs_create_dir("smartreflex", NULL);
+		if (IS_ERR_OR_NULL(sr_dbg_dir)) {
+			ret = PTR_ERR(sr_dbg_dir);
+			pr_err("%s:sr debugfs dir creation failed(%d)\n",
+				__func__, ret);
+			goto err_iounmap;
+		}
+	}
+
+	sr_info->dbg_dir = debugfs_create_dir(sr_info->name, sr_dbg_dir);
+	if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
+		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
+			__func__);
+		ret = PTR_ERR(sr_info->dbg_dir);
+		goto err_free_name;
+	}
+
+	(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
+			sr_info->dbg_dir, (void *)sr_info, &pm_sr_fops);
+	(void) debugfs_create_x32("errweight", S_IRUGO, sr_info->dbg_dir,
+			&sr_info->err_weight);
+	(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
+			&sr_info->err_maxlimit);
+
+	nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
+	if (IS_ERR_OR_NULL(nvalue_dir)) {
+		dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
+			"for n-values\n", __func__);
+		ret = PTR_ERR(nvalue_dir);
+		goto err_debugfs;
+	}
+
+	if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
+		dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
+			 __func__, sr_info->name);
+		ret = -ENODATA;
+		goto err_debugfs;
+	}
+
+	for (i = 0; i < sr_info->nvalue_count; i++) {
+		char name[NVALUE_NAME_LEN + 1];
+
+		snprintf(name, sizeof(name), "volt_%lu",
+			 sr_info->nvalue_table[i].volt_nominal);
+		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+				&(sr_info->nvalue_table[i].nvalue));
+		snprintf(name, sizeof(name), "errminlimit_%lu",
+			 sr_info->nvalue_table[i].volt_nominal);
+		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+				&(sr_info->nvalue_table[i].errminlimit));
+	}
+
+	return ret;
+
+err_debugfs:
+	debugfs_remove_recursive(sr_info->dbg_dir);
+err_free_name:
+	kfree(sr_info->name);
+err_iounmap:
+	list_del(&sr_info->node);
+	iounmap(sr_info->base);
+err_release_region:
+	release_mem_region(mem->start, resource_size(mem));
+err_free_devinfo:
+	kfree(sr_info);
+
+	return ret;
+}
+
+static int __devexit omap_sr_remove(struct platform_device *pdev)
+{
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct omap_sr *sr_info;
+	struct resource *mem;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		return -EINVAL;
+	}
+
+	sr_info = _sr_lookup(pdata->voltdm);
+	if (IS_ERR(sr_info)) {
+		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+			__func__);
+		return PTR_ERR(sr_info);
+	}
+
+	if (sr_info->autocomp_active)
+		sr_stop_vddautocomp(sr_info);
+	if (sr_info->dbg_dir)
+		debugfs_remove_recursive(sr_info->dbg_dir);
+
+	list_del(&sr_info->node);
+	iounmap(sr_info->base);
+	kfree(sr_info->name);
+	kfree(sr_info);
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem->start, resource_size(mem));
+
+	return 0;
+}
+
+static void __devexit omap_sr_shutdown(struct platform_device *pdev)
+{
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct omap_sr *sr_info;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		return;
+	}
+
+	sr_info = _sr_lookup(pdata->voltdm);
+	if (IS_ERR(sr_info)) {
+		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+			__func__);
+		return;
+	}
+
+	if (sr_info->autocomp_active)
+		sr_stop_vddautocomp(sr_info);
+
+	return;
+}
+
+static struct platform_driver smartreflex_driver = {
+	.remove         = __devexit_p(omap_sr_remove),
+	.shutdown	= __devexit_p(omap_sr_shutdown),
+	.driver		= {
+		.name	= "smartreflex",
+	},
+};
+
+static int __init sr_init(void)
+{
+	int ret = 0;
+
+	/*
+	 * sr_init is a late init. If by then a pmic specific API is not
+	 * registered either there is no need for anything to be done on
+	 * the PMIC side or somebody has forgotten to register a PMIC
+	 * handler. Warn for the second condition.
+	 */
+	if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
+		sr_pmic_data->sr_pmic_init();
+	else
+		pr_warning("%s: No PMIC hook to init smartreflex\n", __func__);
+
+	ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
+	if (ret) {
+		pr_err("%s: platform driver register failed for SR\n",
+			__func__);
+		return ret;
+	}
+
+	return 0;
+}
+late_initcall(sr_init);
+
+static void __exit sr_exit(void)
+{
+	platform_driver_unregister(&smartreflex_driver);
+}
+module_exit(sr_exit);
+
+MODULE_DESCRIPTION("OMAP Smartreflex Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/drivers/power/avs/smartreflex.h b/drivers/power/avs/smartreflex.h
new file mode 100644
index 0000000..dbfb554
--- /dev/null
+++ b/drivers/power/avs/smartreflex.h
@@ -0,0 +1,238 @@
+/*
+ * OMAP Smartreflex Defines and Routines
+ *
+ * Author: Thara Gopinath	<thara@xxxxxx>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@xxxxxx>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_POWER_AVS_SMARTREFLEX_H
+#define __DRIVERS_POWER_AVS_SMARTREFLEX_H
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <plat/smartreflex.h>
+#include <plat/voltage.h>
+
+/*
+ * Different Smartreflex IPs version. The v1 is the 65nm version used in
+ * OMAP3430. The v2 is the update for the 45nm version of the IP
+ * used in OMAP3630 and OMAP4430
+ */
+#define SR_TYPE_V1	1
+#define SR_TYPE_V2	2
+
+/* SMART REFLEX REG ADDRESS OFFSET */
+#define SRCONFIG		0x00
+#define SRSTATUS		0x04
+#define SENVAL			0x08
+#define SENMIN			0x0C
+#define SENMAX			0x10
+#define SENAVG			0x14
+#define AVGWEIGHT		0x18
+#define NVALUERECIPROCAL	0x1c
+#define SENERROR_V1		0x20
+#define ERRCONFIG_V1		0x24
+#define IRQ_EOI			0x20
+#define IRQSTATUS_RAW		0x24
+#define IRQSTATUS		0x28
+#define IRQENABLE_SET		0x2C
+#define IRQENABLE_CLR		0x30
+#define SENERROR_V2		0x34
+#define ERRCONFIG_V2		0x38
+
+/* Bit/Shift Positions */
+
+/* SRCONFIG */
+#define SRCONFIG_ACCUMDATA_SHIFT	22
+#define SRCONFIG_SRCLKLENGTH_SHIFT	12
+#define SRCONFIG_SENNENABLE_V1_SHIFT	5
+#define SRCONFIG_SENPENABLE_V1_SHIFT	3
+#define SRCONFIG_SENNENABLE_V2_SHIFT	1
+#define SRCONFIG_SENPENABLE_V2_SHIFT	0
+#define SRCONFIG_CLKCTRL_SHIFT		0
+
+#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
+
+#define SRCONFIG_SRENABLE		BIT(11)
+#define SRCONFIG_SENENABLE		BIT(10)
+#define SRCONFIG_ERRGEN_EN		BIT(9)
+#define SRCONFIG_MINMAXAVG_EN		BIT(8)
+#define SRCONFIG_DELAYCTRL		BIT(2)
+
+/* AVGWEIGHT */
+#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
+#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
+
+/* NVALUERECIPROCAL */
+#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
+#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
+#define NVALUERECIPROCAL_RNSENP_SHIFT	8
+#define NVALUERECIPROCAL_RNSENN_SHIFT	0
+
+/* ERRCONFIG */
+#define ERRCONFIG_ERRWEIGHT_SHIFT	16
+#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
+#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
+
+#define SR_ERRWEIGHT_MASK		(0x07 << 16)
+#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
+#define SR_ERRMINLIMIT_MASK		(0xff << 0)
+
+#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
+#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
+#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
+#define ERRCONFIG_MCUACCUMINTST		BIT(28)
+#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
+#define ERRCONFIG_MCUVALIDINTST		BIT(26)
+#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
+#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
+#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
+#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
+#define ERRCONFIG_MCUDISACKINTST	BIT(22)
+#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
+
+#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
+					ERRCONFIG_MCUACCUMINTST | \
+					ERRCONFIG_MCUVALIDINTST | \
+					ERRCONFIG_MCUBOUNDINTST | \
+					ERRCONFIG_MCUDISACKINTST)
+/* IRQSTATUS */
+#define IRQSTATUS_MCUACCUMINT		BIT(3)
+#define IRQSTATUS_MCVALIDINT		BIT(2)
+#define IRQSTATUS_MCBOUNDSINT		BIT(1)
+#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
+
+/* IRQENABLE_SET and IRQENABLE_CLEAR */
+#define IRQENABLE_MCUACCUMINT		BIT(3)
+#define IRQENABLE_MCUVALIDINT		BIT(2)
+#define IRQENABLE_MCUBOUNDSINT		BIT(1)
+#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
+
+/* Common Bit values */
+
+#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
+#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
+#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
+#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
+#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
+
+/*
+ * 3430 specific values. Maybe these should be passed from board file or
+ * pmic structures.
+ */
+#define OMAP3430_SR_ACCUMDATA		0x1f4
+
+#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
+#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
+
+#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
+#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
+
+#define OMAP3430_SR_ERRWEIGHT		0x04
+#define OMAP3430_SR_ERRMAXLIMIT		0x02
+
+/**
+ * test_cond_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ *
+ * Copied from omap_test_timeout
+ */
+#define sr_test_cond_timeout(cond, timeout, index)		\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
+/**
+ * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
+ *				pmic specific info to smartreflex driver
+ *
+ * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
+ */
+struct omap_sr_pmic_data {
+	void (*sr_pmic_init) (void);
+};
+
+
+#ifdef CONFIG_POWER_AVS_OMAP
+/*
+ * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
+ * The smartreflex class driver should pass the class type.
+ * Should be used to populate the class_type field of the
+ * omap_smartreflex_class_data structure.
+ */
+#define SR_CLASS1	0x1
+#define SR_CLASS2	0x2
+#define SR_CLASS3	0x3
+
+/**
+ * struct omap_sr_class_data - Smartreflex class driver info
+ *
+ * @enable:		API to enable a particular class smaartreflex.
+ * @disable:		API to disable a particular class smartreflex.
+ * @configure:		API to configure a particular class smartreflex.
+ * @notify:		API to notify the class driver about an event in SR.
+ *			Not needed for class3.
+ * @notify_flags:	specify the events to be notified to the class driver
+ * @class_type:		specify which smartreflex class.
+ *			Can be used by the SR driver to take any class
+ *			based decisions.
+ */
+struct omap_sr_class_data {
+	int (*enable)(struct omap_sr *sr);
+	int (*disable)(struct omap_sr *sr, int is_volt_reset);
+	int (*configure)(struct omap_sr *sr);
+	int (*notify)(struct omap_sr *sr, u32 status);
+	u8 notify_flags;
+	u8 class_type;
+};
+
+/* Smartreflex module enable/disable interface */
+void omap_sr_enable(struct voltagedomain *voltdm);
+void omap_sr_disable(struct voltagedomain *voltdm);
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
+
+/* API to register the pmic specific data with the smartreflex driver. */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
+
+/* Smartreflex driver hooks to be called from Smartreflex class driver */
+int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
+void sr_disable(struct voltagedomain *voltdm);
+int sr_configure_errgen(struct voltagedomain *voltdm);
+int sr_disable_errgen(struct voltagedomain *voltdm);
+int sr_configure_minmax(struct voltagedomain *voltdm);
+
+/* API to register the smartreflex class driver with the smartreflex driver */
+int sr_register_class(struct omap_sr_class_data *class_data);
+#else
+static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable_reset_volt(
+		struct voltagedomain *voltdm) {}
+static inline void omap_sr_register_pmic(
+		struct omap_sr_pmic_data *pmic_data) {}
+#endif
+#endif
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux