Currently in probe
pm_runtime_put(dev->dev);
...
/* i2c device drivers may be active on return from add_adapter() */
adap->nr = pdev->id;
r = i2c_add_numbered_adapter(adap);
if (r) {
dev_err(dev->dev, "failure adding adapter\n");
goto err_free_irq;
}
...
return 0;
err_free_irq:
free_irq(dev->irq, dev);
err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
pm_runtime_put(dev->dev);
This may access the i2c registers without the clocks.
Attempting to fix the same by moving the pm_rintime_put after the error check.
Signed-off-by: Shubhrajyoti D <shubhrajyoti@xxxxxx>
---
drivers/i2c/busses/i2c-omap.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index dd4e296..e12144e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -1095,8 +1095,6 @@ omap_i2c_probe(struct platform_device *pdev)
dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
- pm_runtime_put(dev->dev);
-
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
@@ -1116,6 +1114,8 @@ omap_i2c_probe(struct platform_device *pdev)
of_i2c_register_devices(adap);
+ pm_runtime_put(dev->dev);
+
return 0;
err_free_irq:
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
