On OMAP2/3 McBSP1 port has 6 pin setup, while on OMAP4 the port is McBSP4.
Implement the CLKR/FSR clock mux selection for OMAP4, and make sure that
we add the correct callback for the correct port across supported OMAP
versions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxx>
---
arch/arm/mach-omap2/mcbsp.c | 46 +++++++++++++++++++++++++++++++++++++++++-
1 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 49ff5b8..ecc039e 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -34,7 +34,7 @@
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
-/* McBSP internal signal muxing function */
+/* McBSP1 internal signal muxing function for OMAP2/3 */
static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
const char *src)
{
@@ -65,6 +65,42 @@ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
return 0;
}
+/* McBSP4 internal signal muxing function for OMAP4 */
+#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31)
+#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30)
+static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
+ const char *src)
+{
+ u32 v;
+
+ /*
+ * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
+ * mux) is used */
+ v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
+
+ if (!strcmp(signal, "clkr")) {
+ if (!strcmp(src, "clkr"))
+ v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
+ else if (!strcmp(src, "clkx"))
+ v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
+ else
+ return -EINVAL;
+ } else if (!strcmp(signal, "fsr")) {
+ if (!strcmp(src, "fsr"))
+ v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
+ else if (!strcmp(src, "fsx"))
+ v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
+ else
+ return -EINVAL;
+ } else {
+ return -EINVAL;
+ }
+
+ omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
+
+ return 0;
+}
+
/* McBSP CLKS source switching function */
static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
const char *src)
@@ -146,9 +182,15 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
pdata->has_ccr = true;
}
pdata->set_clk_src = omap2_mcbsp_set_clk_src;
- if (id == 1)
+
+ /* On OMAP2/3 the McBSP1 port has 6 pin configuration */
+ if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
+ /* On OMAP4 the McBSP4 port has 6 pin configuration */
+ if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
+ pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
+
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
/* The FIFO has 1024 + 256 locations */
--
1.7.8.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
