Hi, I hoped that time will solve this, but so far no luck. I just can not get the ethernet port (along with the USB host ports) working on my xM RevC. What is the trick to get it working on 3.3-rc3? There seams to be some configuration issue: [ 1.437530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.444671] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 1.451354] ehci-omap ehci-omap.0: failed to get ehci port0 regulator [ 1.458282] ehci-omap ehci-omap.0: failed to get ehci port1 regulator [ 2.465850] ehci-omap ehci-omap.0: phy reset operation timed out [ 3.473663] ehci-omap ehci-omap.0: phy reset operation timed out [ 3.479980] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3 [ 3.488769] ehci-omap ehci-omap.0: reset hcc_params 0016 thresh 1 uframes 256/512/1024 park [ 3.497589] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT [ 3.506927] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller gentoo ~ # lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub So only the root hub is working, the LAN9514 does not. Yes, I have enabled the needed configs in my kernel. Can someone send me a config file for 3.3-rc3 with working ethernet port? Thanks, Péter -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
