Re: [RFC PATCH 6/8] misc: emif: add interrupt and temperature handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday 16 February 2012 04:11 PM, Santosh Shilimkar wrote:
On Saturday 04 February 2012 05:46 PM, Aneesh V wrote:
Add an ISR for EMIF that:
	1. reports details of access errors
	2. takes action on thermal events

On thermal events SDRAM timing parameters are
adjusted to ensure safe operation

Also clear all interrupts on shut-down. Pending IRQs
may casue problems during warm-reset.

Add some more details like MR4, EMIF polling frequency etc
for better understanding.

Will do.




Signed-off-by: Aneesh V<aneesh@xxxxxx>
---
  drivers/misc/emif.c |  209 ++++++++++++++++++++++++++++++++++++++++++++++++++-
  1 files changed, 207 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/emif.c b/drivers/misc/emif.c
index 36ba6f4..5c2b0ae 100644
--- a/drivers/misc/emif.c
+++ b/drivers/misc/emif.c
@@ -500,6 +500,45 @@ static u32 get_pwr_mgmt_ctrl(u32 freq, struct emif_data *emif, u32 ip_rev)
  }

  /*
+ * Get the temperature level of the EMIF instance:
+ * Reads the MR4 register of attached SDRAM parts to find out the temperature
+ * level. If there are two parts attached(one on each CS), then the temperature
+ * level for the EMIF instance is the higher of the two temperatures.
+ */
+static void get_temperature_level(struct emif_data *emif)
+{
+	u32		temp, temperature_level;
+	unsigned long	irqs;
+	void __iomem	*base;
+
+	base = emif->base;
+
+	/* Read mode register 4 */
+	writel(DDR_MR4, base + EMIF_LPDDR2_MODE_REG_CONFIG);
+	temperature_level = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
+	temperature_level = (temperature_level&  MR4_SDRAM_REF_RATE_MASK)>>
+				MR4_SDRAM_REF_RATE_SHIFT;
+
+	if (emif->plat_data->device_info->cs1_used) {
+		writel(DDR_MR4 | CS_MASK, base + EMIF_LPDDR2_MODE_REG_CONFIG);
+		temp = readl(base + EMIF_LPDDR2_MODE_REG_DATA);
+		temp = (temp&  MR4_SDRAM_REF_RATE_MASK)
+				>>  MR4_SDRAM_REF_RATE_SHIFT;
+		temperature_level = max(temp, temperature_level);
+	}
+
+	spin_lock_irqsave(&emif->lock, irqs);
Add a line here.

Will do.

+	/* treat everything less than nominal(3) in MR4 as nominal */
+	if (unlikely(temperature_level<  SDRAM_TEMP_NOMINAL))
+		temperature_level = SDRAM_TEMP_NOMINAL;
+
+	/* if we get reserved value in MR4 persist with the existing value */
+	if (likely(temperature_level != SDRAM_TEMP_RESERVED_4))
+		emif->temperature_level = temperature_level;
+	spin_unlock_irqrestore(&emif->lock, irqs);
+}
+

rest of the patch looks fine to me

Thanks,
Aneesh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux