VDD1 and VDD2 are the core voltage regulators on OMAP3. VDD1 is used
to control MPU/IVA voltage, and VDD2 is used for CORE. These regulators
are needed by DVFS.
Voltage ranges for VDD1 and VDD2 are taken from twl4030/twl5030 data manual.
Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
arch/arm/mach-omap2/twl-common.c | 36 ++++++++++++++++++++++++++++++++++++
1 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 10b20c6..5f62e51 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -126,6 +126,38 @@ static struct regulator_init_data omap3_vpll2_idata = {
.consumer_supplies = omap3_vpll2_supplies,
};
+static struct regulator_consumer_supply omap3_vdd1_supply[] = {
+ REGULATOR_SUPPLY("vcc", "mpu.0"),
+};
+
+static struct regulator_consumer_supply omap3_vdd2_supply[] = {
+ REGULATOR_SUPPLY("vcc", "l3_main.0"),
+};
+
+static struct regulator_init_data omap3_vdd1 = {
+ .constraints = {
+ .name = "VDD1",
+ .min_uV = 600000,
+ .max_uV = 1450000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3_vdd1_supply),
+ .consumer_supplies = omap3_vdd1_supply,
+};
+
+static struct regulator_init_data omap3_vdd2 = {
+ .constraints = {
+ .name = "VDD2",
+ .min_uV = 600000,
+ .max_uV = 1450000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(omap3_vdd2_supply),
+ .consumer_supplies = omap3_vdd2_supply,
+};
+
void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags)
{
@@ -133,6 +165,10 @@ void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
pmic_data->irq_base = TWL4030_IRQ_BASE;
if (!pmic_data->irq_end)
pmic_data->irq_end = TWL4030_IRQ_END;
+ if (!pmic_data->vdd1)
+ pmic_data->vdd1 = &omap3_vdd1;
+ if (!pmic_data->vdd2)
+ pmic_data->vdd2 = &omap3_vdd2;
/* Common platform data configurations */
if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
