Hi,
> On Mon, Feb 13, 2012 at 04:26:19AM +0000, Gupta, Ajay Kumar wrote:
> > Hi,
> > > * Ajay Kumar Gupta <ajay.gupta@xxxxxx> [120207 19:55]:
> > > > Switch on the phy for am335x.
> > > >
> > > > Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
> > > > ---
> > > > arch/arm/mach-omap2/omap_phy_internal.c | 21 ++++++++++++++----
> ---
> > > > 1 files changed, 14 insertions(+), 7 deletions(-)
> > > >
> > > > diff --git a/arch/arm/mach-omap2/omap_phy_internal.c
> > > > b/arch/arm/mach-
> > > omap2/omap_phy_internal.c
> > > > index 4c90477..7129408 100644
> > > > --- a/arch/arm/mach-omap2/omap_phy_internal.c
> > > > +++ b/arch/arm/mach-omap2/omap_phy_internal.c
> > > > @@ -266,7 +266,11 @@ void ti81xx_musb_phy_power(u8 on)
> > > > void __iomem *scm_base = NULL;
> > > > u32 usbphycfg;
> > > >
> > > > - scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
> > > > + if (cpu_is_ti81xx())
> > > > + scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
> > > > + else if (cpu_is_am33xx())
> > > > + scm_base = ioremap(AM33XX_SCM_BASE, SZ_2K);
> > > > +
> > > > if (!scm_base) {
> > > > pr_err("system control module ioremap failed\n");
> > > > return;
> > > > @@ -278,16 +282,19 @@ void ti81xx_musb_phy_power(u8 on)
> > > > if (cpu_is_ti816x()) {
> > > > usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
> > > > usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
> > > > - } else if (cpu_is_ti814x()) {
> > > > - usbphycfg &= ~(USBPHY_CM_PWRDN |
> USBPHY_OTG_PWRDN
> > > > - | USBPHY_DPINPUT | USBPHY_DMINPUT);
> > > > - usbphycfg |= (USBPHY_OTGVDET_EN |
> USBPHY_OTGSESSEND_EN
> > > > - | USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL);
> > > > + } else if (cpu_is_ti814x() || cpu_is_am33xx()) {
> > > > + usbphycfg &= ~(USBPHY_CM_PWRDN |
> USBPHY_OTG_PWRDN);
> > > > + usbphycfg |= USBPHY_OTGVDET_EN |
> USBPHY_OTGSESSEND_EN;
> > > > + if (cpu_is_ti814x()) {
> > > > + usbphycfg &= ~(USBPHY_DPINPUT |
> > > USBPHY_DMINPUT);
> > > > + usbphycfg |= USBPHY_DPOPBUFCTL
> > > > + | USBPHY_DMOPBUFCTL;
> > > > + }
> > > > }
> > > > } else {
> > > > if (cpu_is_ti816x())
> > > > usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
> > > > - else if (cpu_is_ti814x())
> > > > + else if (cpu_is_ti814x() || cpu_is_am33xx())
> > > > usbphycfg |= USBPHY_CM_PWRDN |
> USBPHY_OTG_PWRDN;
> > > >
> > >
> > > Please remove all the cpu_is_xxxx calls from the *_phy_power
> functions.
> > > You should need those only in *_phy_init to set the right flags
> > > once, not every time you enable or disable the phy.
> >
> > Tony,
> >
> > This is a common function used by ti814x, ti816x and am335x and they
> > have mostly the same bit map but a few bits are different so we would
> > need to have cpu_is_xxxx.
> >
> > We use this *_phy_power(1) for phy on/init and *_phy_power(0) for phy
> > off and don't have separate *_phy_init(). Even in that case we would
> > require
> > cpu_is_xxxx() as phy power down bit is different for ti816x and same
> > for ti814x and am335x.
> >
> > Please let me know how should we handle this.
>
> use cpu_is_xxxx() to set a flag, and check on the flag.
Are you saying save the flags once in a local static flag and use
the same later on?
Ajay
>
> --
> balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
