Hello, This series depends on the V3 of MFD: twl6040: Conversion to i2c driver set. In order to have proper regulator support for twl6040 on SDP4430, and PandaBoards I needed to add support for the V1V8, and V2V1 SMPS supplies from twl6030. The configuration on both boards (and the TRM recommendations) are the same, so it make sens to have the V1V8, V2V1 supply configured in the twl-common to avoid duplicated code in board files. The last patch in this series was part of the V2 of MFD: twl6040: Conversion to i2c driver set. I have added Mark's Reviewd-by tag, and also addressed his comment regarding to the supplies member of the twl6040 struct (no need to allocate it separately). Regards, Peter --- Peter Ujfalusi (7): OMAP: 4430SDP: Correct fixed regulator device ID regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply MFD: twl-core: regulator configuration for twl6030 V1V8, V2V1 SMPS OMAP4: twl-common: Add twl6030 V1V8, V2V1 SMPS common configuration OMAP: 4430SDP: Use common configuration for V1V8, V2V1 supplies OMAP: omap4panda: Use common configuration for V1V8, V2V1 supplies MFD: TWL6040: Add regulator support for VIO, V2V1 supplies arch/arm/mach-omap2/board-4430sdp.c | 11 ++++++-- arch/arm/mach-omap2/board-omap4panda.c | 4 ++- arch/arm/mach-omap2/twl-common.c | 43 ++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/twl-common.h | 2 + drivers/mfd/twl-core.c | 10 +++++++ drivers/mfd/twl6040-core.c | 33 +++++++++++++++++++++--- drivers/regulator/twl-regulator.c | 2 + include/linux/i2c/twl.h | 2 + include/linux/mfd/twl6040.h | 2 + 9 files changed, 101 insertions(+), 8 deletions(-) -- 1.7.8.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
