Hi,
On Sunday 05 February 2012 08:08 PM, Russell King - ARM Linux wrote:
On Sun, Feb 05, 2012 at 12:56:26PM +0000, Russell King - ARM Linux wrote:
And here's another (set of) problem(s) on the 4430SDP board once the
previous have been worked around:
omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
omap_hwmod: ipu: failed to hardreset
omap_hwmod: mcpdm: cannot be enabled (3)
...
machine_constraints_voltage: VUSB: failed to apply 3300000uV constraint
...
twl_reg twl_reg.46: can't register VUSB, -22
twl_reg: probe of twl_reg.46 failed with error -22
...
omap_vc_i2c_init: I2C config for all channels must match.
omap_vc_i2c_init: I2C config for all channels must match.
Fixing this error message to provide something useful allows this problem
to be diagnosed.
omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0).
omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0).
Let's look at the PMIC data for OMAP4:
static struct omap_voltdm_pmic omap3_mpu_pmic = {
.i2c_high_speed = true,
static struct omap_voltdm_pmic omap3_core_pmic = {
.i2c_high_speed = true,
static struct omap_voltdm_pmic omap4_mpu_pmic = {
.i2c_high_speed = true,
static struct omap_voltdm_pmic omap4_iva_pmic = {
.i2c_high_speed = true,
static struct omap_voltdm_pmic omap4_core_pmic = {
So, OMAP4's PMIC information for the core domain does not have I2C high
speed set, yet the others do. So if this is an illegal configuration
then the TWL data is plainly wrong. If it's a legal configuration, the
voltage domain code is talking utter crap about requiring all these to
match. They can't both be right.
Has this code been tested on OMAP4 platforms? I think not (or if it
was, it was done blindly without regard for the messages the kernel
was spitting out - again, that's a failing of people to properly test
their code _before_ sending it upstream.)
Power Management for TI OMAP4.
clock: disabling unused clocks to save power
omapfb omapfb: no driver for display: lcd
omapfb omapfb: no driver for display: lcd2
Okay, so this requires backlight support, and TAAL selected, so that sorts
that error, but causes others:
taal display0: taal panel revision e3.83.7d
omapdss DSI error: DSI CIO error, cio irqstatus 200000
DSI CIO IRQ 0x200000: ERRCONTENTIONLP1_1
omapdss DSI error: DSI CIO error, cio irqstatus 200000
DSI CIO IRQ 0x200000: ERRCONTENTIONLP1_1
omapdss DSI error: DSI CIO error, cio irqstatus 200000
DSI CIO IRQ 0x200000: ERRCONTENTIONLP1_1
omapdss DSI error: DSI CIO error, cio irqstatus 200000
DSI CIO IRQ 0x200000: ERRCONTENTIONLP1_1
omapdss DSI error: DSI CIO error, cio irqstatus 200000
DSI CIO IRQ 0x200000: ERRCONTENTIONLP1_1
omapdss DSI error: DSI CIO error, cio irqstatus 200000
DSI CIO IRQ 0x200000: ERRCONTENTIONLP1_1
This happens when the flex cable connected to the display is faulty or
loose.
Failed to set PHY power mode to 1
omapdss HDMI error: failed to power on device
For some reason, enabling TAAL fixes this HDMI error. Why I don't
understand but it's very very counter intuitive.
This was an issue with our driver. I've posted a fix for this.
Thanks,
Archit
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-omap/arch/arm/mach-omap2/omap_hwmod.c:1604 _idle+0x34/0xc8()
omap_hwmod: dss_hdmi: idle state can only be entered from enabled state
This message doesn't exist in the kernel source as far as I can find.
Ah, yes it does, someone well wrapped the message.
WARN(1, "omap_hwmod: %s: idle state can only be entered from "
"enabled state\n", oh->name);
So that goes into my patch of omap fixes. There's others in that file
which will get the same treatment.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
