* Gary Thomas <gary@xxxxxxxxxxxx> [120206 09:14]: > I have an OMAP3530 (DM3730) board which uses a very simple > power controller (TPS65910A1). This controller does not > support many of the power supplies, etc, that are common > on the TWL4030 and similar devices. > > I'm using Linux 3.0. How can I remove the reliance on the > TWL devices? Simply disabling PM in my configuration isn't > enough - that generates a bunch of undefined references. > Also, there are many places where power supply stuff is > accessed, outside of PM, in particular DSS2 which has a > terrible time. Here's what I get when I disabled PM and > REGULATOR support: Yes it should be possible to support other PMIC other than TWL chips too.. What you're seeing is a bug. > arch/arm/mach-omap2/built-in.o: In function `omap_set_pwrdm_state': > /local/linux-3.0/arch/arm/mach-omap2/pm.c:122: undefined reference to `pwrdm_read_next_pwrst' > /local/linux-3.0/arch/arm/mach-omap2/pm.c:126: undefined reference to `pwrdm_read_pwrst' > /local/linux-3.0/arch/arm/mach-omap2/pm.c:127: undefined reference to `pwrdm_read_pwrst' > /local/linux-3.0/arch/arm/mach-omap2/pm.c:133: undefined reference to `pwrdm_wait_transition' > /local/linux-3.0/arch/arm/mach-omap2/pm.c:138: undefined reference to `pwrdm_set_next_pwrst' > /local/linux-3.0/arch/arm/mach-omap2/pm.c:153: undefined reference to `pwrdm_set_lowpwrstchange' > /local/linux-3.0/arch/arm/mach-omap2/pm.c:159: undefined reference to `pwrdm_wait_transition' > /local/linux-3.0/arch/arm/mach-omap2/pm.c:160: undefined reference to `pwrdm_state_switch' > arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count': > /local/linux-3.0/arch/arm/mach-omap2/omap_hwmod.c:2638: undefined reference to `pwrdm_get_context_loss_count' > arch/arm/mach-omap2/built-in.o: In function `_clkdm_clk_hwmod_disable': > /local/linux-3.0/arch/arm/mach-omap2/clockdomain.c:895: undefined reference to `pwrdm_clkdm_state_switch' > arch/arm/mach-omap2/built-in.o: In function `clkdm_allow_idle': > /local/linux-3.0/arch/arm/mach-omap2/clockdomain.c:786: undefined reference to `pwrdm_clkdm_state_switch' > arch/arm/mach-omap2/built-in.o: In function `_clkdm_clk_hwmod_enable': > /local/linux-3.0/arch/arm/mach-omap2/clockdomain.c:869: undefined reference to `pwrdm_wait_transition' > /local/linux-3.0/arch/arm/mach-omap2/clockdomain.c:870: undefined reference to `pwrdm_clkdm_state_switch' > arch/arm/mach-omap2/built-in.o: In function `_clkdm_register': > /local/linux-3.0/arch/arm/mach-omap2/clockdomain.c:79: undefined reference to `pwrdm_lookup' > /local/linux-3.0/arch/arm/mach-omap2/clockdomain.c:93: undefined reference to `pwrdm_add_clkdm' > arch/arm/mach-omap2/built-in.o: In function `omap2_clk_disable_unused': > /local/linux-3.0/arch/arm/mach-omap2/clock.c:442: undefined reference to `pwrdm_clkdm_state_switch' > arch/arm/mach-omap2/built-in.o: In function `omap2_init_common_infrastructure': > /local/linux-3.0/arch/arm/mach-omap2/io.c:355: undefined reference to `omap3xxx_voltagedomains_init' > /local/linux-3.0/arch/arm/mach-omap2/io.c:356: undefined reference to `omap3xxx_powerdomains_init' > > > Any ideas? I'd like to keep my changes to the kernel to > a minimum, Sounds like there should be empty functions for the prdm_* functions in this case. Kevin might have some patches to fix this already. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
