When runtime_pm was originally added, it was done in rather confusing
way: omap2430_musb_init() (called from musb_init_controller) would do
runtime_pm_get_sync() and musb_init_controller() itself would do
runtime_pm_put to balance it out. This is not only confusing but also
wrong if non-omap2430 glue layer is used.
This confusion resulted in commit 772aed45b604 "usb: musb: fix
pm_runtime mismatch", that removed runtime_pm_put() from
musb_init_controller as that looked unbalanced, and also happened to
fix unrelated isp1704_charger crash. However this broke runtime PM
functionality (musb is now always powered, even without gadget active).
Avoid these confusing runtime pm dependences by making
musb_init_controller() and omap2430_musb_init() do their own runtime
get/put pairs; also cover error paths. Remove unneeded runtime_pm_put
in omap2430_remove too. isp1704_charger crash that motivated
772aed45b604 will be fixed by following patch.
Cc: Felipe Contreras <felipe.contreras@xxxxxxxxx>
Signed-off-by: Grazvydas Ignotas <notasas@xxxxxxxxx>
---
drivers/usb/musb/musb_core.c | 9 ++++++++-
drivers/usb/musb/omap2430.c | 2 +-
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 3d11cf6..19543c9 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1904,7 +1904,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
if (!musb->isr) {
status = -ENODEV;
- goto fail3;
+ goto fail2;
}
if (!musb->xceiv->io_ops) {
@@ -1912,6 +1912,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb->xceiv->io_ops = &musb_ulpi_access;
}
+ pm_runtime_get_sync(musb->controller);
+
#ifndef CONFIG_MUSB_PIO_ONLY
if (use_dma && dev->dma_mask) {
struct dma_controller *c;
@@ -2023,6 +2025,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
goto fail5;
#endif
+ pm_runtime_put(musb->controller);
+
dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
({char *s;
switch (musb->board_mode) {
@@ -2047,6 +2051,9 @@ fail4:
musb_gadget_cleanup(musb);
fail3:
+ pm_runtime_put_sync(musb->controller);
+
+fail2:
if (musb->irq_wake)
device_init_wakeup(dev, 0);
musb_platform_exit(musb);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index df719ea..b105d46 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -332,6 +332,7 @@ static int omap2430_musb_init(struct musb *musb)
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
+ pm_runtime_put_noidle(musb->controller);
return 0;
err1:
@@ -477,7 +478,6 @@ static int __exit omap2430_remove(struct platform_device *pdev)
platform_device_del(glue->musb);
platform_device_put(glue->musb);
- pm_runtime_put(&pdev->dev);
kfree(glue);
return 0;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
