[PATCH 02/16] OMAPFB: Remove OMAP2/3 support from old omapfb driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Old omapfb driver (drivers/video/omap/) is no longer used for OMAP2+
devices, and thus we can remove OMAP2+ support from it and make it an
OMAP1 omapfb driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
 drivers/video/omap/Kconfig       |    9 +-
 drivers/video/omap/Makefile      |    5 +-
 drivers/video/omap/dispc.c       | 1547 --------------------------------------
 drivers/video/omap/dispc.h       |   46 --
 drivers/video/omap/omapfb.h      |    4 -
 drivers/video/omap/omapfb_main.c |   16 -
 drivers/video/omap/rfbi.c        |  598 ---------------
 7 files changed, 5 insertions(+), 2220 deletions(-)
 delete mode 100644 drivers/video/omap/dispc.c
 delete mode 100644 drivers/video/omap/dispc.h
 delete mode 100644 drivers/video/omap/rfbi.c

diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index ab234d5..1e7536d 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -1,11 +1,10 @@
 config FB_OMAP
 	tristate "OMAP frame buffer support (EXPERIMENTAL)"
-	depends on FB && (OMAP2_DSS = "n")
-	depends on ARCH_OMAP1 || ARCH_OMAP2 || ARCH_OMAP3
+	depends on FB
+	depends on ARCH_OMAP1
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-	select TWL4030_CORE if MACH_OMAP_2430SDP
 	help
           Frame buffer driver for OMAP based boards.
 
@@ -42,7 +41,7 @@ config FB_OMAP_LCD_MIPID
 
 config FB_OMAP_BOOTLOADER_INIT
 	bool "Check bootloader initialization"
-	depends on FB_OMAP || FB_OMAP2
+	depends on FB_OMAP
 	help
 	  Say Y here if you want to enable checking if the bootloader has
 	  already initialized the display controller. In this case the
@@ -61,7 +60,7 @@ config FB_OMAP_CONSISTENT_DMA_SIZE
 
 config FB_OMAP_DMA_TUNE
         bool "Set DMA SDRAM access priority high"
-        depends on FB_OMAP && ARCH_OMAP1
+        depends on FB_OMAP
         help
           On systems in which video memory is in system memory
           (SDRAM) this will speed up graphics DMA operations.
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 7042a4a..7965375 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -1,5 +1,5 @@
 #
-# Makefile for the new OMAP framebuffer device driver
+# Makefile for the OMAP1 framebuffer device driver
 #
 
 obj-$(CONFIG_FB_OMAP) += omapfb.o
@@ -7,11 +7,8 @@ obj-$(CONFIG_FB_OMAP) += omapfb.o
 objs-yy := omapfb_main.o
 
 objs-y$(CONFIG_ARCH_OMAP1) += lcdc.o
-objs-y$(CONFIG_ARCH_OMAP2) += dispc.o
-objs-y$(CONFIG_ARCH_OMAP3) += dispc.o
 
 objs-$(CONFIG_ARCH_OMAP1)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
-objs-$(CONFIG_ARCH_OMAP2)$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += rfbi.o
 
 objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
 
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
deleted file mode 100644
index 6f61e78..0000000
--- a/drivers/video/omap/dispc.c
+++ /dev/null
@@ -1,1547 +0,0 @@
-/*
- * OMAP2 display controller support
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Imre Deak <imre.deak@xxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <plat/sram.h>
-#include <plat/board.h>
-
-#include "omapfb.h"
-#include "dispc.h"
-
-#define MODULE_NAME			"dispc"
-
-#define DSS_BASE			0x48050000
-#define DSS_SYSCONFIG			0x0010
-
-#define DISPC_BASE			0x48050400
-
-/* DISPC common */
-#define DISPC_REVISION			0x0000
-#define DISPC_SYSCONFIG			0x0010
-#define DISPC_SYSSTATUS			0x0014
-#define DISPC_IRQSTATUS			0x0018
-#define DISPC_IRQENABLE			0x001C
-#define DISPC_CONTROL			0x0040
-#define DISPC_CONFIG			0x0044
-#define DISPC_CAPABLE			0x0048
-#define DISPC_DEFAULT_COLOR0		0x004C
-#define DISPC_DEFAULT_COLOR1		0x0050
-#define DISPC_TRANS_COLOR0		0x0054
-#define DISPC_TRANS_COLOR1		0x0058
-#define DISPC_LINE_STATUS		0x005C
-#define DISPC_LINE_NUMBER		0x0060
-#define DISPC_TIMING_H			0x0064
-#define DISPC_TIMING_V			0x0068
-#define DISPC_POL_FREQ			0x006C
-#define DISPC_DIVISOR			0x0070
-#define DISPC_SIZE_DIG			0x0078
-#define DISPC_SIZE_LCD			0x007C
-
-#define DISPC_DATA_CYCLE1		0x01D4
-#define DISPC_DATA_CYCLE2		0x01D8
-#define DISPC_DATA_CYCLE3		0x01DC
-
-/* DISPC GFX plane */
-#define DISPC_GFX_BA0			0x0080
-#define DISPC_GFX_BA1			0x0084
-#define DISPC_GFX_POSITION		0x0088
-#define DISPC_GFX_SIZE			0x008C
-#define DISPC_GFX_ATTRIBUTES		0x00A0
-#define DISPC_GFX_FIFO_THRESHOLD	0x00A4
-#define DISPC_GFX_FIFO_SIZE_STATUS	0x00A8
-#define DISPC_GFX_ROW_INC		0x00AC
-#define DISPC_GFX_PIXEL_INC		0x00B0
-#define DISPC_GFX_WINDOW_SKIP		0x00B4
-#define DISPC_GFX_TABLE_BA		0x00B8
-
-/* DISPC Video plane 1/2 */
-#define DISPC_VID1_BASE			0x00BC
-#define DISPC_VID2_BASE			0x014C
-
-/* Offsets into DISPC_VID1/2_BASE */
-#define DISPC_VID_BA0			0x0000
-#define DISPC_VID_BA1			0x0004
-#define DISPC_VID_POSITION		0x0008
-#define DISPC_VID_SIZE			0x000C
-#define DISPC_VID_ATTRIBUTES		0x0010
-#define DISPC_VID_FIFO_THRESHOLD	0x0014
-#define DISPC_VID_FIFO_SIZE_STATUS	0x0018
-#define DISPC_VID_ROW_INC		0x001C
-#define DISPC_VID_PIXEL_INC		0x0020
-#define DISPC_VID_FIR			0x0024
-#define DISPC_VID_PICTURE_SIZE		0x0028
-#define DISPC_VID_ACCU0			0x002C
-#define DISPC_VID_ACCU1			0x0030
-
-/* 8 elements in 8 byte increments */
-#define DISPC_VID_FIR_COEF_H0		0x0034
-/* 8 elements in 8 byte increments */
-#define DISPC_VID_FIR_COEF_HV0		0x0038
-/* 5 elements in 4 byte increments */
-#define DISPC_VID_CONV_COEF0		0x0074
-
-#define DISPC_IRQ_FRAMEMASK		0x0001
-#define DISPC_IRQ_VSYNC			0x0002
-#define DISPC_IRQ_EVSYNC_EVEN		0x0004
-#define DISPC_IRQ_EVSYNC_ODD		0x0008
-#define DISPC_IRQ_ACBIAS_COUNT_STAT	0x0010
-#define DISPC_IRQ_PROG_LINE_NUM		0x0020
-#define DISPC_IRQ_GFX_FIFO_UNDERFLOW	0x0040
-#define DISPC_IRQ_GFX_END_WIN		0x0080
-#define DISPC_IRQ_PAL_GAMMA_MASK	0x0100
-#define DISPC_IRQ_OCP_ERR		0x0200
-#define DISPC_IRQ_VID1_FIFO_UNDERFLOW	0x0400
-#define DISPC_IRQ_VID1_END_WIN		0x0800
-#define DISPC_IRQ_VID2_FIFO_UNDERFLOW	0x1000
-#define DISPC_IRQ_VID2_END_WIN		0x2000
-#define DISPC_IRQ_SYNC_LOST		0x4000
-
-#define DISPC_IRQ_MASK_ALL		0x7fff
-
-#define DISPC_IRQ_MASK_ERROR		(DISPC_IRQ_GFX_FIFO_UNDERFLOW |	\
-					     DISPC_IRQ_VID1_FIFO_UNDERFLOW | \
-					     DISPC_IRQ_VID2_FIFO_UNDERFLOW | \
-					     DISPC_IRQ_SYNC_LOST)
-
-#define RFBI_CONTROL			0x48050040
-
-#define MAX_PALETTE_SIZE		(256 * 16)
-
-#define FLD_MASK(pos, len)	(((1 << len) - 1) << pos)
-
-#define MOD_REG_FLD(reg, mask, val) \
-	dispc_write_reg((reg), (dispc_read_reg(reg) & ~(mask)) | (val));
-
-#define OMAP2_SRAM_START		0x40200000
-/* Maximum size, in reality this is smaller if SRAM is partially locked. */
-#define OMAP2_SRAM_SIZE			0xa0000		/* 640k */
-
-/* We support the SDRAM / SRAM types. See OMAPFB_PLANE_MEMTYPE_* in omapfb.h */
-#define DISPC_MEMTYPE_NUM		2
-
-#define RESMAP_SIZE(_page_cnt)						\
-	((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8)
-#define RESMAP_PTR(_res_map, _page_nr)					\
-	(((_res_map)->map) + (_page_nr) / (sizeof(unsigned long) * 8))
-#define RESMAP_MASK(_page_nr)						\
-	(1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1)))
-
-struct resmap {
-	unsigned long	start;
-	unsigned	page_cnt;
-	unsigned long	*map;
-};
-
-#define MAX_IRQ_HANDLERS            4
-
-static struct {
-	void __iomem	*base;
-
-	struct omapfb_mem_desc	mem_desc;
-	struct resmap		*res_map[DISPC_MEMTYPE_NUM];
-	atomic_t		map_count[OMAPFB_PLANE_NUM];
-
-	dma_addr_t	palette_paddr;
-	void		*palette_vaddr;
-
-	int		ext_mode;
-
-	struct {
-		u32	irq_mask;
-		void	(*callback)(void *);
-		void	*data;
-	} irq_handlers[MAX_IRQ_HANDLERS];
-	struct completion	frame_done;
-
-	int		fir_hinc[OMAPFB_PLANE_NUM];
-	int		fir_vinc[OMAPFB_PLANE_NUM];
-
-	struct clk	*dss_ick, *dss1_fck;
-	struct clk	*dss_54m_fck;
-
-	enum omapfb_update_mode	update_mode;
-	struct omapfb_device	*fbdev;
-
-	struct omapfb_color_key	color_key;
-} dispc;
-
-static void enable_lcd_clocks(int enable);
-
-static void inline dispc_write_reg(int idx, u32 val)
-{
-	__raw_writel(val, dispc.base + idx);
-}
-
-static u32 inline dispc_read_reg(int idx)
-{
-	u32 l = __raw_readl(dispc.base + idx);
-	return l;
-}
-
-/* Select RFBI or bypass mode */
-static void enable_rfbi_mode(int enable)
-{
-	void __iomem *rfbi_control;
-	u32 l;
-
-	l = dispc_read_reg(DISPC_CONTROL);
-	/* Enable RFBI, GPIO0/1 */
-	l &= ~((1 << 11) | (1 << 15) | (1 << 16));
-	l |= enable ? (1 << 11) : 0;
-	/* RFBI En: GPIO0/1=10  RFBI Dis: GPIO0/1=11 */
-	l |= 1 << 15;
-	l |= enable ? 0 : (1 << 16);
-	dispc_write_reg(DISPC_CONTROL, l);
-
-	/* Set bypass mode in RFBI module */
-	rfbi_control = ioremap(RFBI_CONTROL, SZ_1K);
-	if (!rfbi_control) {
-		pr_err("Unable to ioremap rfbi_control\n");
-		return;
-	}
-	l = __raw_readl(rfbi_control);
-	l |= enable ? 0 : (1 << 1);
-	__raw_writel(l, rfbi_control);
-	iounmap(rfbi_control);
-}
-
-static void set_lcd_data_lines(int data_lines)
-{
-	u32 l;
-	int code = 0;
-
-	switch (data_lines) {
-	case 12:
-		code = 0;
-		break;
-	case 16:
-		code = 1;
-		break;
-	case 18:
-		code = 2;
-		break;
-	case 24:
-		code = 3;
-		break;
-	default:
-		BUG();
-	}
-
-	l = dispc_read_reg(DISPC_CONTROL);
-	l &= ~(0x03 << 8);
-	l |= code << 8;
-	dispc_write_reg(DISPC_CONTROL, l);
-}
-
-static void set_load_mode(int mode)
-{
-	BUG_ON(mode & ~(DISPC_LOAD_CLUT_ONLY | DISPC_LOAD_FRAME_ONLY |
-			DISPC_LOAD_CLUT_ONCE_FRAME));
-	MOD_REG_FLD(DISPC_CONFIG, 0x03 << 1, mode << 1);
-}
-
-void omap_dispc_set_lcd_size(int x, int y)
-{
-	BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_SIZE_LCD, FLD_MASK(16, 11) | FLD_MASK(0, 11),
-			((y - 1) << 16) | (x - 1));
-	enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_set_lcd_size);
-
-void omap_dispc_set_digit_size(int x, int y)
-{
-	BUG_ON((x > (1 << 11)) || (y > (1 << 11)));
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_SIZE_DIG, FLD_MASK(16, 11) | FLD_MASK(0, 11),
-			((y - 1) << 16) | (x - 1));
-	enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_set_digit_size);
-
-static void setup_plane_fifo(int plane, int ext_mode)
-{
-	const u32 ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD,
-				DISPC_VID1_BASE + DISPC_VID_FIFO_THRESHOLD,
-			        DISPC_VID2_BASE + DISPC_VID_FIFO_THRESHOLD };
-	const u32 fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS,
-				DISPC_VID1_BASE + DISPC_VID_FIFO_SIZE_STATUS,
-				DISPC_VID2_BASE + DISPC_VID_FIFO_SIZE_STATUS };
-	int low, high;
-	u32 l;
-
-	BUG_ON(plane > 2);
-
-	l = dispc_read_reg(fsz_reg[plane]);
-	l &= FLD_MASK(0, 11);
-	if (ext_mode) {
-		low = l * 3 / 4;
-		high = l;
-	} else {
-		low = l / 4;
-		high = l * 3 / 4;
-	}
-	MOD_REG_FLD(ftrs_reg[plane], FLD_MASK(16, 12) | FLD_MASK(0, 12),
-			(high << 16) | low);
-}
-
-void omap_dispc_enable_lcd_out(int enable)
-{
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_CONTROL, 1, enable ? 1 : 0);
-	enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_enable_lcd_out);
-
-void omap_dispc_enable_digit_out(int enable)
-{
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_CONTROL, 1 << 1, enable ? 1 << 1 : 0);
-	enable_lcd_clocks(0);
-}
-EXPORT_SYMBOL(omap_dispc_enable_digit_out);
-
-static inline int _setup_plane(int plane, int channel_out,
-				  u32 paddr, int screen_width,
-				  int pos_x, int pos_y, int width, int height,
-				  int color_mode)
-{
-	const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
-				DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
-			        DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
-	const u32 ba_reg[] = { DISPC_GFX_BA0, DISPC_VID1_BASE + DISPC_VID_BA0,
-				DISPC_VID2_BASE + DISPC_VID_BA0 };
-	const u32 ps_reg[] = { DISPC_GFX_POSITION,
-				DISPC_VID1_BASE + DISPC_VID_POSITION,
-				DISPC_VID2_BASE + DISPC_VID_POSITION };
-	const u32 sz_reg[] = { DISPC_GFX_SIZE,
-				DISPC_VID1_BASE + DISPC_VID_PICTURE_SIZE,
-				DISPC_VID2_BASE + DISPC_VID_PICTURE_SIZE };
-	const u32 ri_reg[] = { DISPC_GFX_ROW_INC,
-				DISPC_VID1_BASE + DISPC_VID_ROW_INC,
-			        DISPC_VID2_BASE + DISPC_VID_ROW_INC };
-	const u32 vs_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
-				DISPC_VID2_BASE + DISPC_VID_SIZE };
-
-	int chout_shift, burst_shift;
-	int chout_val;
-	int color_code;
-	int bpp;
-	int cconv_en;
-	int set_vsize;
-	u32 l;
-
-#ifdef VERBOSE
-	dev_dbg(dispc.fbdev->dev, "plane %d channel %d paddr %#08x scr_width %d"
-		    " pos_x %d pos_y %d width %d height %d color_mode %d\n",
-		    plane, channel_out, paddr, screen_width, pos_x, pos_y,
-		    width, height, color_mode);
-#endif
-
-	set_vsize = 0;
-	switch (plane) {
-	case OMAPFB_PLANE_GFX:
-		burst_shift = 6;
-		chout_shift = 8;
-		break;
-	case OMAPFB_PLANE_VID1:
-	case OMAPFB_PLANE_VID2:
-		burst_shift = 14;
-		chout_shift = 16;
-		set_vsize = 1;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	switch (channel_out) {
-	case OMAPFB_CHANNEL_OUT_LCD:
-		chout_val = 0;
-		break;
-	case OMAPFB_CHANNEL_OUT_DIGIT:
-		chout_val = 1;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	cconv_en = 0;
-	switch (color_mode) {
-	case OMAPFB_COLOR_RGB565:
-		color_code = DISPC_RGB_16_BPP;
-		bpp = 16;
-		break;
-	case OMAPFB_COLOR_YUV422:
-		if (plane == 0)
-			return -EINVAL;
-		color_code = DISPC_UYVY_422;
-		cconv_en = 1;
-		bpp = 16;
-		break;
-	case OMAPFB_COLOR_YUY422:
-		if (plane == 0)
-			return -EINVAL;
-		color_code = DISPC_YUV2_422;
-		cconv_en = 1;
-		bpp = 16;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	l = dispc_read_reg(at_reg[plane]);
-
-	l &= ~(0x0f << 1);
-	l |= color_code << 1;
-	l &= ~(1 << 9);
-	l |= cconv_en << 9;
-
-	l &= ~(0x03 << burst_shift);
-	l |= DISPC_BURST_8x32 << burst_shift;
-
-	l &= ~(1 << chout_shift);
-	l |= chout_val << chout_shift;
-
-	dispc_write_reg(at_reg[plane], l);
-
-	dispc_write_reg(ba_reg[plane], paddr);
-	MOD_REG_FLD(ps_reg[plane],
-		    FLD_MASK(16, 11) | FLD_MASK(0, 11), (pos_y << 16) | pos_x);
-
-	MOD_REG_FLD(sz_reg[plane], FLD_MASK(16, 11) | FLD_MASK(0, 11),
-			((height - 1) << 16) | (width - 1));
-
-	if (set_vsize) {
-		/* Set video size if set_scale hasn't set it */
-		if (!dispc.fir_vinc[plane])
-			MOD_REG_FLD(vs_reg[plane],
-				FLD_MASK(16, 11), (height - 1) << 16);
-		if (!dispc.fir_hinc[plane])
-			MOD_REG_FLD(vs_reg[plane],
-				FLD_MASK(0, 11), width - 1);
-	}
-
-	dispc_write_reg(ri_reg[plane], (screen_width - width) * bpp / 8 + 1);
-
-	return height * screen_width * bpp / 8;
-}
-
-static int omap_dispc_setup_plane(int plane, int channel_out,
-				  unsigned long offset,
-				  int screen_width,
-				  int pos_x, int pos_y, int width, int height,
-				  int color_mode)
-{
-	u32 paddr;
-	int r;
-
-	if ((unsigned)plane > dispc.mem_desc.region_cnt)
-		return -EINVAL;
-	paddr = dispc.mem_desc.region[plane].paddr + offset;
-	enable_lcd_clocks(1);
-	r = _setup_plane(plane, channel_out, paddr,
-			screen_width,
-			pos_x, pos_y, width, height, color_mode);
-	enable_lcd_clocks(0);
-	return r;
-}
-
-static void write_firh_reg(int plane, int reg, u32 value)
-{
-	u32 base;
-
-	if (plane == 1)
-		base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_H0;
-	else
-		base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_H0;
-	dispc_write_reg(base + reg * 8,	value);
-}
-
-static void write_firhv_reg(int plane, int reg, u32 value)
-{
-	u32 base;
-
-	if (plane == 1)
-		base = DISPC_VID1_BASE + DISPC_VID_FIR_COEF_HV0;
-	else
-		base = DISPC_VID2_BASE + DISPC_VID_FIR_COEF_HV0;
-	dispc_write_reg(base + reg * 8,	value);
-}
-
-static void set_upsampling_coef_table(int plane)
-{
-	const u32 coef[][2] = {
-		{ 0x00800000, 0x00800000 },
-		{ 0x0D7CF800, 0x037B02FF },
-		{ 0x1E70F5FF, 0x0C6F05FE },
-		{ 0x335FF5FE, 0x205907FB },
-		{ 0xF74949F7, 0x00404000 },
-		{ 0xF55F33FB, 0x075920FE },
-		{ 0xF5701EFE, 0x056F0CFF },
-		{ 0xF87C0DFF, 0x027B0300 },
-	};
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		write_firh_reg(plane, i, coef[i][0]);
-		write_firhv_reg(plane, i, coef[i][1]);
-	}
-}
-
-static int omap_dispc_set_scale(int plane,
-				int orig_width, int orig_height,
-				int out_width, int out_height)
-{
-	const u32 at_reg[]  = { 0, DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
-				DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
-	const u32 vs_reg[]  = { 0, DISPC_VID1_BASE + DISPC_VID_SIZE,
-				DISPC_VID2_BASE + DISPC_VID_SIZE };
-	const u32 fir_reg[] = { 0, DISPC_VID1_BASE + DISPC_VID_FIR,
-				DISPC_VID2_BASE + DISPC_VID_FIR };
-
-	u32 l;
-	int fir_hinc;
-	int fir_vinc;
-
-	if ((unsigned)plane > OMAPFB_PLANE_NUM)
-		return -ENODEV;
-
-	if (plane == OMAPFB_PLANE_GFX &&
-	    (out_width != orig_width || out_height != orig_height))
-		return -EINVAL;
-
-	enable_lcd_clocks(1);
-	if (orig_width < out_width) {
-		/*
-		 * Upsampling.
-		 * Currently you can only scale both dimensions in one way.
-		 */
-		if (orig_height > out_height ||
-		    orig_width * 8 < out_width ||
-		    orig_height * 8 < out_height) {
-			enable_lcd_clocks(0);
-			return -EINVAL;
-		}
-		set_upsampling_coef_table(plane);
-	} else if (orig_width > out_width) {
-		/* Downsampling not yet supported
-		*/
-
-		enable_lcd_clocks(0);
-		return -EINVAL;
-	}
-	if (!orig_width || orig_width == out_width)
-		fir_hinc = 0;
-	else
-		fir_hinc = 1024 * orig_width / out_width;
-	if (!orig_height || orig_height == out_height)
-		fir_vinc = 0;
-	else
-		fir_vinc = 1024 * orig_height / out_height;
-	dispc.fir_hinc[plane] = fir_hinc;
-	dispc.fir_vinc[plane] = fir_vinc;
-
-	MOD_REG_FLD(fir_reg[plane],
-		    FLD_MASK(16, 12) | FLD_MASK(0, 12),
-		    ((fir_vinc & 4095) << 16) |
-		    (fir_hinc & 4095));
-
-	dev_dbg(dispc.fbdev->dev, "out_width %d out_height %d orig_width %d "
-		"orig_height %d fir_hinc  %d fir_vinc %d\n",
-		out_width, out_height, orig_width, orig_height,
-		fir_hinc, fir_vinc);
-
-	MOD_REG_FLD(vs_reg[plane],
-		    FLD_MASK(16, 11) | FLD_MASK(0, 11),
-		    ((out_height - 1) << 16) | (out_width - 1));
-
-	l = dispc_read_reg(at_reg[plane]);
-	l &= ~(0x03 << 5);
-	l |= fir_hinc ? (1 << 5) : 0;
-	l |= fir_vinc ? (1 << 6) : 0;
-	dispc_write_reg(at_reg[plane], l);
-
-	enable_lcd_clocks(0);
-	return 0;
-}
-
-static int omap_dispc_enable_plane(int plane, int enable)
-{
-	const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
-				DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
-				DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
-	if ((unsigned int)plane > dispc.mem_desc.region_cnt)
-		return -EINVAL;
-
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(at_reg[plane], 1, enable ? 1 : 0);
-	enable_lcd_clocks(0);
-
-	return 0;
-}
-
-static int omap_dispc_set_color_key(struct omapfb_color_key *ck)
-{
-	u32 df_reg, tr_reg;
-	int shift, val;
-
-	switch (ck->channel_out) {
-	case OMAPFB_CHANNEL_OUT_LCD:
-		df_reg = DISPC_DEFAULT_COLOR0;
-		tr_reg = DISPC_TRANS_COLOR0;
-		shift = 10;
-		break;
-	case OMAPFB_CHANNEL_OUT_DIGIT:
-		df_reg = DISPC_DEFAULT_COLOR1;
-		tr_reg = DISPC_TRANS_COLOR1;
-		shift = 12;
-		break;
-	default:
-		return -EINVAL;
-	}
-	switch (ck->key_type) {
-	case OMAPFB_COLOR_KEY_DISABLED:
-		val = 0;
-		break;
-	case OMAPFB_COLOR_KEY_GFX_DST:
-		val = 1;
-		break;
-	case OMAPFB_COLOR_KEY_VID_SRC:
-		val = 3;
-		break;
-	default:
-		return -EINVAL;
-	}
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_CONFIG, FLD_MASK(shift, 2), val << shift);
-
-	if (val != 0)
-		dispc_write_reg(tr_reg, ck->trans_key);
-	dispc_write_reg(df_reg, ck->background);
-	enable_lcd_clocks(0);
-
-	dispc.color_key = *ck;
-
-	return 0;
-}
-
-static int omap_dispc_get_color_key(struct omapfb_color_key *ck)
-{
-	*ck = dispc.color_key;
-	return 0;
-}
-
-static void load_palette(void)
-{
-}
-
-static int omap_dispc_set_update_mode(enum omapfb_update_mode mode)
-{
-	int r = 0;
-
-	if (mode != dispc.update_mode) {
-		switch (mode) {
-		case OMAPFB_AUTO_UPDATE:
-		case OMAPFB_MANUAL_UPDATE:
-			enable_lcd_clocks(1);
-			omap_dispc_enable_lcd_out(1);
-			dispc.update_mode = mode;
-			break;
-		case OMAPFB_UPDATE_DISABLED:
-			init_completion(&dispc.frame_done);
-			omap_dispc_enable_lcd_out(0);
-			if (!wait_for_completion_timeout(&dispc.frame_done,
-					msecs_to_jiffies(500))) {
-				dev_err(dispc.fbdev->dev,
-					 "timeout waiting for FRAME DONE\n");
-			}
-			dispc.update_mode = mode;
-			enable_lcd_clocks(0);
-			break;
-		default:
-			r = -EINVAL;
-		}
-	}
-
-	return r;
-}
-
-static void omap_dispc_get_caps(int plane, struct omapfb_caps *caps)
-{
-	caps->ctrl |= OMAPFB_CAPS_PLANE_RELOCATE_MEM;
-	if (plane > 0)
-		caps->ctrl |= OMAPFB_CAPS_PLANE_SCALE;
-	caps->plane_color |= (1 << OMAPFB_COLOR_RGB565) |
-			     (1 << OMAPFB_COLOR_YUV422) |
-			     (1 << OMAPFB_COLOR_YUY422);
-	if (plane == 0)
-		caps->plane_color |= (1 << OMAPFB_COLOR_CLUT_8BPP) |
-				     (1 << OMAPFB_COLOR_CLUT_4BPP) |
-				     (1 << OMAPFB_COLOR_CLUT_2BPP) |
-				     (1 << OMAPFB_COLOR_CLUT_1BPP) |
-				     (1 << OMAPFB_COLOR_RGB444);
-}
-
-static enum omapfb_update_mode omap_dispc_get_update_mode(void)
-{
-	return dispc.update_mode;
-}
-
-static void setup_color_conv_coef(void)
-{
-	u32 mask = FLD_MASK(16, 11) | FLD_MASK(0, 11);
-	int cf1_reg = DISPC_VID1_BASE + DISPC_VID_CONV_COEF0;
-	int cf2_reg = DISPC_VID2_BASE + DISPC_VID_CONV_COEF0;
-	int at1_reg = DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES;
-	int at2_reg = DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES;
-	const struct color_conv_coef {
-		int  ry,  rcr,  rcb,   gy,  gcr,  gcb,   by,  bcr,  bcb;
-		int  full_range;
-	}  ctbl_bt601_5 = {
-		    298,  409,    0,  298, -208, -100,  298,    0,  517, 0,
-	};
-	const struct color_conv_coef *ct;
-#define CVAL(x, y)	(((x & 2047) << 16) | (y & 2047))
-
-	ct = &ctbl_bt601_5;
-
-	MOD_REG_FLD(cf1_reg,		mask,	CVAL(ct->rcr, ct->ry));
-	MOD_REG_FLD(cf1_reg + 4,	mask,	CVAL(ct->gy,  ct->rcb));
-	MOD_REG_FLD(cf1_reg + 8,	mask,	CVAL(ct->gcb, ct->gcr));
-	MOD_REG_FLD(cf1_reg + 12,	mask,	CVAL(ct->bcr, ct->by));
-	MOD_REG_FLD(cf1_reg + 16,	mask,	CVAL(0,	      ct->bcb));
-
-	MOD_REG_FLD(cf2_reg,		mask,	CVAL(ct->rcr, ct->ry));
-	MOD_REG_FLD(cf2_reg + 4,	mask,	CVAL(ct->gy,  ct->rcb));
-	MOD_REG_FLD(cf2_reg + 8,	mask,	CVAL(ct->gcb, ct->gcr));
-	MOD_REG_FLD(cf2_reg + 12,	mask,	CVAL(ct->bcr, ct->by));
-	MOD_REG_FLD(cf2_reg + 16,	mask,	CVAL(0,	      ct->bcb));
-#undef CVAL
-
-	MOD_REG_FLD(at1_reg, (1 << 11), ct->full_range);
-	MOD_REG_FLD(at2_reg, (1 << 11), ct->full_range);
-}
-
-static void calc_ck_div(int is_tft, int pck, int *lck_div, int *pck_div)
-{
-	unsigned long fck, lck;
-
-	*lck_div = 1;
-	pck = max(1, pck);
-	fck = clk_get_rate(dispc.dss1_fck);
-	lck = fck;
-	*pck_div = (lck + pck - 1) / pck;
-	if (is_tft)
-		*pck_div = max(2, *pck_div);
-	else
-		*pck_div = max(3, *pck_div);
-	if (*pck_div > 255) {
-		*pck_div = 255;
-		lck = pck * *pck_div;
-		*lck_div = fck / lck;
-		BUG_ON(*lck_div < 1);
-		if (*lck_div > 255) {
-			*lck_div = 255;
-			dev_warn(dispc.fbdev->dev, "pixclock %d kHz too low.\n",
-				 pck / 1000);
-		}
-	}
-}
-
-static void set_lcd_tft_mode(int enable)
-{
-	u32 mask;
-
-	mask = 1 << 3;
-	MOD_REG_FLD(DISPC_CONTROL, mask, enable ? mask : 0);
-}
-
-static void set_lcd_timings(void)
-{
-	u32 l;
-	int lck_div, pck_div;
-	struct lcd_panel *panel = dispc.fbdev->panel;
-	int is_tft = panel->config & OMAP_LCDC_PANEL_TFT;
-	unsigned long fck;
-
-	l = dispc_read_reg(DISPC_TIMING_H);
-	l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
-	l |= ( max(1, (min(64,  panel->hsw))) - 1 ) << 0;
-	l |= ( max(1, (min(256, panel->hfp))) - 1 ) << 8;
-	l |= ( max(1, (min(256, panel->hbp))) - 1 ) << 20;
-	dispc_write_reg(DISPC_TIMING_H, l);
-
-	l = dispc_read_reg(DISPC_TIMING_V);
-	l &= ~(FLD_MASK(0, 6) | FLD_MASK(8, 8) | FLD_MASK(20, 8));
-	l |= ( max(1, (min(64,  panel->vsw))) - 1 ) << 0;
-	l |= ( max(0, (min(255, panel->vfp))) - 0 ) << 8;
-	l |= ( max(0, (min(255, panel->vbp))) - 0 ) << 20;
-	dispc_write_reg(DISPC_TIMING_V, l);
-
-	l = dispc_read_reg(DISPC_POL_FREQ);
-	l &= ~FLD_MASK(12, 6);
-	l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 12;
-	l |= panel->acb & 0xff;
-	dispc_write_reg(DISPC_POL_FREQ, l);
-
-	calc_ck_div(is_tft, panel->pixel_clock * 1000, &lck_div, &pck_div);
-
-	l = dispc_read_reg(DISPC_DIVISOR);
-	l &= ~(FLD_MASK(16, 8) | FLD_MASK(0, 8));
-	l |= (lck_div << 16) | (pck_div << 0);
-	dispc_write_reg(DISPC_DIVISOR, l);
-
-	/* update panel info with the exact clock */
-	fck = clk_get_rate(dispc.dss1_fck);
-	panel->pixel_clock = fck / lck_div / pck_div / 1000;
-}
-
-static void recalc_irq_mask(void)
-{
-	int i;
-	unsigned long irq_mask = DISPC_IRQ_MASK_ERROR;
-
-	for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
-		if (!dispc.irq_handlers[i].callback)
-			continue;
-
-		irq_mask |= dispc.irq_handlers[i].irq_mask;
-	}
-
-	enable_lcd_clocks(1);
-	MOD_REG_FLD(DISPC_IRQENABLE, 0x7fff, irq_mask);
-	enable_lcd_clocks(0);
-}
-
-int omap_dispc_request_irq(unsigned long irq_mask, void (*callback)(void *data),
-			   void *data)
-{
-	int i;
-
-	BUG_ON(callback == NULL);
-
-	for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
-		if (dispc.irq_handlers[i].callback)
-			continue;
-
-		dispc.irq_handlers[i].irq_mask = irq_mask;
-		dispc.irq_handlers[i].callback = callback;
-		dispc.irq_handlers[i].data = data;
-		recalc_irq_mask();
-
-		return 0;
-	}
-
-	return -EBUSY;
-}
-EXPORT_SYMBOL(omap_dispc_request_irq);
-
-void omap_dispc_free_irq(unsigned long irq_mask, void (*callback)(void *data),
-			 void *data)
-{
-	int i;
-
-	for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
-		if (dispc.irq_handlers[i].callback == callback &&
-		    dispc.irq_handlers[i].data == data) {
-			dispc.irq_handlers[i].irq_mask = 0;
-			dispc.irq_handlers[i].callback = NULL;
-			dispc.irq_handlers[i].data = NULL;
-			recalc_irq_mask();
-			return;
-		}
-	}
-
-	BUG();
-}
-EXPORT_SYMBOL(omap_dispc_free_irq);
-
-static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
-{
-	u32 stat;
-	int i = 0;
-
-	enable_lcd_clocks(1);
-
-	stat = dispc_read_reg(DISPC_IRQSTATUS);
-	if (stat & DISPC_IRQ_FRAMEMASK)
-		complete(&dispc.frame_done);
-
-	if (stat & DISPC_IRQ_MASK_ERROR) {
-		if (printk_ratelimit()) {
-			dev_err(dispc.fbdev->dev, "irq error status %04x\n",
-				stat & 0x7fff);
-		}
-	}
-
-	for (i = 0; i < MAX_IRQ_HANDLERS; i++) {
-		if (unlikely(dispc.irq_handlers[i].callback &&
-			     (stat & dispc.irq_handlers[i].irq_mask)))
-			dispc.irq_handlers[i].callback(
-						dispc.irq_handlers[i].data);
-	}
-
-	dispc_write_reg(DISPC_IRQSTATUS, stat);
-
-	enable_lcd_clocks(0);
-
-	return IRQ_HANDLED;
-}
-
-static int get_dss_clocks(void)
-{
-	dispc.dss_ick = clk_get(&dispc.fbdev->dssdev->dev, "ick");
-	if (IS_ERR(dispc.dss_ick)) {
-		dev_err(dispc.fbdev->dev, "can't get ick\n");
-		return PTR_ERR(dispc.dss_ick);
-	}
-
-	dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "fck");
-	if (IS_ERR(dispc.dss1_fck)) {
-		dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
-		clk_put(dispc.dss_ick);
-		return PTR_ERR(dispc.dss1_fck);
-	}
-
-	dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_clk");
-	if (IS_ERR(dispc.dss_54m_fck)) {
-		dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
-		clk_put(dispc.dss_ick);
-		clk_put(dispc.dss1_fck);
-		return PTR_ERR(dispc.dss_54m_fck);
-	}
-
-	return 0;
-}
-
-static void put_dss_clocks(void)
-{
-	clk_put(dispc.dss_54m_fck);
-	clk_put(dispc.dss1_fck);
-	clk_put(dispc.dss_ick);
-}
-
-static void enable_lcd_clocks(int enable)
-{
-	if (enable) {
-		clk_enable(dispc.dss_ick);
-		clk_enable(dispc.dss1_fck);
-	} else {
-		clk_disable(dispc.dss1_fck);
-		clk_disable(dispc.dss_ick);
-	}
-}
-
-static void enable_digit_clocks(int enable)
-{
-	if (enable)
-		clk_enable(dispc.dss_54m_fck);
-	else
-		clk_disable(dispc.dss_54m_fck);
-}
-
-static void omap_dispc_suspend(void)
-{
-	if (dispc.update_mode == OMAPFB_AUTO_UPDATE) {
-		init_completion(&dispc.frame_done);
-		omap_dispc_enable_lcd_out(0);
-		if (!wait_for_completion_timeout(&dispc.frame_done,
-				msecs_to_jiffies(500))) {
-			dev_err(dispc.fbdev->dev,
-				"timeout waiting for FRAME DONE\n");
-		}
-		enable_lcd_clocks(0);
-	}
-}
-
-static void omap_dispc_resume(void)
-{
-	if (dispc.update_mode == OMAPFB_AUTO_UPDATE) {
-		enable_lcd_clocks(1);
-		if (!dispc.ext_mode) {
-			set_lcd_timings();
-			load_palette();
-		}
-		omap_dispc_enable_lcd_out(1);
-	}
-}
-
-
-static int omap_dispc_update_window(struct fb_info *fbi,
-				 struct omapfb_update_window *win,
-				 void (*complete_callback)(void *arg),
-				 void *complete_callback_data)
-{
-	return dispc.update_mode == OMAPFB_UPDATE_DISABLED ? -ENODEV : 0;
-}
-
-static int mmap_kern(struct omapfb_mem_region *region)
-{
-	struct vm_struct	*kvma;
-	struct vm_area_struct	vma;
-	pgprot_t		pgprot;
-	unsigned long		vaddr;
-
-	kvma = get_vm_area(region->size, VM_IOREMAP);
-	if (kvma == NULL) {
-		dev_err(dispc.fbdev->dev, "can't get kernel vm area\n");
-		return -ENOMEM;
-	}
-	vma.vm_mm = &init_mm;
-
-	vaddr = (unsigned long)kvma->addr;
-
-	pgprot = pgprot_writecombine(pgprot_kernel);
-	vma.vm_start = vaddr;
-	vma.vm_end = vaddr + region->size;
-	if (io_remap_pfn_range(&vma, vaddr, region->paddr >> PAGE_SHIFT,
-			   region->size, pgprot) < 0) {
-		dev_err(dispc.fbdev->dev, "kernel mmap for FBMEM failed\n");
-		return -EAGAIN;
-	}
-	region->vaddr = (void *)vaddr;
-
-	return 0;
-}
-
-static void mmap_user_open(struct vm_area_struct *vma)
-{
-	int plane = (int)vma->vm_private_data;
-
-	atomic_inc(&dispc.map_count[plane]);
-}
-
-static void mmap_user_close(struct vm_area_struct *vma)
-{
-	int plane = (int)vma->vm_private_data;
-
-	atomic_dec(&dispc.map_count[plane]);
-}
-
-static const struct vm_operations_struct mmap_user_ops = {
-	.open = mmap_user_open,
-	.close = mmap_user_close,
-};
-
-static int omap_dispc_mmap_user(struct fb_info *info,
-				struct vm_area_struct *vma)
-{
-	struct omapfb_plane_struct *plane = info->par;
-	unsigned long off;
-	unsigned long start;
-	u32 len;
-
-	if (vma->vm_end - vma->vm_start == 0)
-		return 0;
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
-		return -EINVAL;
-	off = vma->vm_pgoff << PAGE_SHIFT;
-
-	start = info->fix.smem_start;
-	len = info->fix.smem_len;
-	if (off >= len)
-		return -EINVAL;
-	if ((vma->vm_end - vma->vm_start + off) > len)
-		return -EINVAL;
-	off += start;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-	vma->vm_flags |= VM_IO | VM_RESERVED;
-	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	vma->vm_ops = &mmap_user_ops;
-	vma->vm_private_data = (void *)plane->idx;
-	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-			     vma->vm_end - vma->vm_start, vma->vm_page_prot))
-		return -EAGAIN;
-	/* vm_ops.open won't be called for mmap itself. */
-	atomic_inc(&dispc.map_count[plane->idx]);
-	return 0;
-}
-
-static void unmap_kern(struct omapfb_mem_region *region)
-{
-	vunmap(region->vaddr);
-}
-
-static int alloc_palette_ram(void)
-{
-	dispc.palette_vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
-		MAX_PALETTE_SIZE, &dispc.palette_paddr, GFP_KERNEL);
-	if (dispc.palette_vaddr == NULL) {
-		dev_err(dispc.fbdev->dev, "failed to alloc palette memory\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static void free_palette_ram(void)
-{
-	dma_free_writecombine(dispc.fbdev->dev, MAX_PALETTE_SIZE,
-			dispc.palette_vaddr, dispc.palette_paddr);
-}
-
-static int alloc_fbmem(struct omapfb_mem_region *region)
-{
-	region->vaddr = dma_alloc_writecombine(dispc.fbdev->dev,
-			region->size, &region->paddr, GFP_KERNEL);
-
-	if (region->vaddr == NULL) {
-		dev_err(dispc.fbdev->dev, "unable to allocate FB DMA memory\n");
-		return -ENOMEM;
-	}
-
-	return 0;
-}
-
-static void free_fbmem(struct omapfb_mem_region *region)
-{
-	dma_free_writecombine(dispc.fbdev->dev, region->size,
-			      region->vaddr, region->paddr);
-}
-
-static struct resmap *init_resmap(unsigned long start, size_t size)
-{
-	unsigned page_cnt;
-	struct resmap *res_map;
-
-	page_cnt = PAGE_ALIGN(size) / PAGE_SIZE;
-	res_map =
-	    kzalloc(sizeof(struct resmap) + RESMAP_SIZE(page_cnt), GFP_KERNEL);
-	if (res_map == NULL)
-		return NULL;
-	res_map->start = start;
-	res_map->page_cnt = page_cnt;
-	res_map->map = (unsigned long *)(res_map + 1);
-	return res_map;
-}
-
-static void cleanup_resmap(struct resmap *res_map)
-{
-	kfree(res_map);
-}
-
-static inline int resmap_mem_type(unsigned long start)
-{
-	if (start >= OMAP2_SRAM_START &&
-	    start < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
-		return OMAPFB_MEMTYPE_SRAM;
-	else
-		return OMAPFB_MEMTYPE_SDRAM;
-}
-
-static inline int resmap_page_reserved(struct resmap *res_map, unsigned page_nr)
-{
-	return *RESMAP_PTR(res_map, page_nr) & RESMAP_MASK(page_nr) ? 1 : 0;
-}
-
-static inline void resmap_reserve_page(struct resmap *res_map, unsigned page_nr)
-{
-	BUG_ON(resmap_page_reserved(res_map, page_nr));
-	*RESMAP_PTR(res_map, page_nr) |= RESMAP_MASK(page_nr);
-}
-
-static inline void resmap_free_page(struct resmap *res_map, unsigned page_nr)
-{
-	BUG_ON(!resmap_page_reserved(res_map, page_nr));
-	*RESMAP_PTR(res_map, page_nr) &= ~RESMAP_MASK(page_nr);
-}
-
-static void resmap_reserve_region(unsigned long start, size_t size)
-{
-
-	struct resmap	*res_map;
-	unsigned	start_page;
-	unsigned	end_page;
-	int		mtype;
-	unsigned	i;
-
-	mtype = resmap_mem_type(start);
-	res_map = dispc.res_map[mtype];
-	dev_dbg(dispc.fbdev->dev, "reserve mem type %d start %08lx size %d\n",
-		mtype, start, size);
-	start_page = (start - res_map->start) / PAGE_SIZE;
-	end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
-	for (i = start_page; i < end_page; i++)
-		resmap_reserve_page(res_map, i);
-}
-
-static void resmap_free_region(unsigned long start, size_t size)
-{
-	struct resmap	*res_map;
-	unsigned	start_page;
-	unsigned	end_page;
-	unsigned	i;
-	int		mtype;
-
-	mtype = resmap_mem_type(start);
-	res_map = dispc.res_map[mtype];
-	dev_dbg(dispc.fbdev->dev, "free mem type %d start %08lx size %d\n",
-		mtype, start, size);
-	start_page = (start - res_map->start) / PAGE_SIZE;
-	end_page = start_page + PAGE_ALIGN(size) / PAGE_SIZE;
-	for (i = start_page; i < end_page; i++)
-		resmap_free_page(res_map, i);
-}
-
-static unsigned long resmap_alloc_region(int mtype, size_t size)
-{
-	unsigned i;
-	unsigned total;
-	unsigned start_page;
-	unsigned long start;
-	struct resmap *res_map = dispc.res_map[mtype];
-
-	BUG_ON(mtype >= DISPC_MEMTYPE_NUM || res_map == NULL || !size);
-
-	size = PAGE_ALIGN(size) / PAGE_SIZE;
-	start_page = 0;
-	total = 0;
-	for (i = 0; i < res_map->page_cnt; i++) {
-		if (resmap_page_reserved(res_map, i)) {
-			start_page = i + 1;
-			total = 0;
-		} else if (++total == size)
-			break;
-	}
-	if (total < size)
-		return 0;
-
-	start = res_map->start + start_page * PAGE_SIZE;
-	resmap_reserve_region(start, size * PAGE_SIZE);
-
-	return start;
-}
-
-/* Note that this will only work for user mappings, we don't deal with
- * kernel mappings here, so fbcon will keep using the old region.
- */
-static int omap_dispc_setup_mem(int plane, size_t size, int mem_type,
-				unsigned long *paddr)
-{
-	struct omapfb_mem_region *rg;
-	unsigned long new_addr = 0;
-
-	if ((unsigned)plane > dispc.mem_desc.region_cnt)
-		return -EINVAL;
-	if (mem_type >= DISPC_MEMTYPE_NUM)
-		return -EINVAL;
-	if (dispc.res_map[mem_type] == NULL)
-		return -ENOMEM;
-	rg = &dispc.mem_desc.region[plane];
-	if (size == rg->size && mem_type == rg->type)
-		return 0;
-	if (atomic_read(&dispc.map_count[plane]))
-		return -EBUSY;
-	if (rg->size != 0)
-		resmap_free_region(rg->paddr, rg->size);
-	if (size != 0) {
-		new_addr = resmap_alloc_region(mem_type, size);
-		if (!new_addr) {
-			/* Reallocate old region. */
-			resmap_reserve_region(rg->paddr, rg->size);
-			return -ENOMEM;
-		}
-	}
-	rg->paddr = new_addr;
-	rg->size = size;
-	rg->type = mem_type;
-
-	*paddr = new_addr;
-
-	return 0;
-}
-
-static int setup_fbmem(struct omapfb_mem_desc *req_md)
-{
-	struct omapfb_mem_region	*rg;
-	int i;
-	int r;
-	unsigned long			mem_start[DISPC_MEMTYPE_NUM];
-	unsigned long			mem_end[DISPC_MEMTYPE_NUM];
-
-	if (!req_md->region_cnt) {
-		dev_err(dispc.fbdev->dev, "no memory regions defined\n");
-		return -ENOENT;
-	}
-
-	rg = &req_md->region[0];
-	memset(mem_start, 0xff, sizeof(mem_start));
-	memset(mem_end, 0, sizeof(mem_end));
-
-	for (i = 0; i < req_md->region_cnt; i++, rg++) {
-		int mtype;
-		if (rg->paddr) {
-			rg->alloc = 0;
-			if (rg->vaddr == NULL) {
-				rg->map = 1;
-				if ((r = mmap_kern(rg)) < 0)
-					return r;
-			}
-		} else {
-			if (rg->type != OMAPFB_MEMTYPE_SDRAM) {
-				dev_err(dispc.fbdev->dev,
-					"unsupported memory type\n");
-				return -EINVAL;
-			}
-			rg->alloc = rg->map = 1;
-			if ((r = alloc_fbmem(rg)) < 0)
-				return r;
-		}
-		mtype = rg->type;
-
-		if (rg->paddr < mem_start[mtype])
-			mem_start[mtype] = rg->paddr;
-		if (rg->paddr + rg->size > mem_end[mtype])
-			mem_end[mtype] = rg->paddr + rg->size;
-	}
-
-	for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
-		unsigned long start;
-		size_t size;
-		if (mem_end[i] == 0)
-			continue;
-		start = mem_start[i];
-		size = mem_end[i] - start;
-		dispc.res_map[i] = init_resmap(start, size);
-		r = -ENOMEM;
-		if (dispc.res_map[i] == NULL)
-			goto fail;
-		/* Initial state is that everything is reserved. This
-		 * includes possible holes as well, which will never be
-		 * freed.
-		 */
-		resmap_reserve_region(start, size);
-	}
-
-	dispc.mem_desc = *req_md;
-
-	return 0;
-fail:
-	for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
-		if (dispc.res_map[i] != NULL)
-			cleanup_resmap(dispc.res_map[i]);
-	}
-	return r;
-}
-
-static void cleanup_fbmem(void)
-{
-	struct omapfb_mem_region *rg;
-	int i;
-
-	for (i = 0; i < DISPC_MEMTYPE_NUM; i++) {
-		if (dispc.res_map[i] != NULL)
-			cleanup_resmap(dispc.res_map[i]);
-	}
-	rg = &dispc.mem_desc.region[0];
-	for (i = 0; i < dispc.mem_desc.region_cnt; i++, rg++) {
-		if (rg->alloc)
-			free_fbmem(rg);
-		else {
-			if (rg->map)
-				unmap_kern(rg);
-		}
-	}
-}
-
-static int omap_dispc_init(struct omapfb_device *fbdev, int ext_mode,
-			   struct omapfb_mem_desc *req_vram)
-{
-	int r;
-	u32 l;
-	struct lcd_panel *panel = fbdev->panel;
-	void __iomem *ram_fw_base;
-	int tmo = 10000;
-	int skip_init = 0;
-	int i;
-
-	memset(&dispc, 0, sizeof(dispc));
-
-	dispc.base = ioremap(DISPC_BASE, SZ_1K);
-	if (!dispc.base) {
-		dev_err(fbdev->dev, "can't ioremap DISPC\n");
-		return -ENOMEM;
-	}
-
-	dispc.fbdev = fbdev;
-	dispc.ext_mode = ext_mode;
-
-	init_completion(&dispc.frame_done);
-
-	if ((r = get_dss_clocks()) < 0)
-		goto fail0;
-
-	enable_lcd_clocks(1);
-
-#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
-	l = dispc_read_reg(DISPC_CONTROL);
-	/* LCD enabled ? */
-	if (l & 1) {
-		pr_info("omapfb: skipping hardware initialization\n");
-		skip_init = 1;
-	}
-#endif
-
-	if (!skip_init) {
-		/* Reset monitoring works only w/ the 54M clk */
-		enable_digit_clocks(1);
-
-		/* Soft reset */
-		MOD_REG_FLD(DISPC_SYSCONFIG, 1 << 1, 1 << 1);
-
-		while (!(dispc_read_reg(DISPC_SYSSTATUS) & 1)) {
-			if (!--tmo) {
-				dev_err(dispc.fbdev->dev, "soft reset failed\n");
-				r = -ENODEV;
-				enable_digit_clocks(0);
-				goto fail1;
-			}
-		}
-
-		enable_digit_clocks(0);
-	}
-
-	/* Enable smart standby/idle, autoidle and wakeup */
-	l = dispc_read_reg(DISPC_SYSCONFIG);
-	l &= ~((3 << 12) | (3 << 3));
-	l |= (2 << 12) | (2 << 3) | (1 << 2) | (1 << 0);
-	dispc_write_reg(DISPC_SYSCONFIG, l);
-	omap_writel(1 << 0, DSS_BASE + DSS_SYSCONFIG);
-
-	/* Set functional clock autogating */
-	l = dispc_read_reg(DISPC_CONFIG);
-	l |= 1 << 9;
-	dispc_write_reg(DISPC_CONFIG, l);
-
-	l = dispc_read_reg(DISPC_IRQSTATUS);
-	dispc_write_reg(DISPC_IRQSTATUS, l);
-
-	recalc_irq_mask();
-
-	if ((r = request_irq(INT_24XX_DSS_IRQ, omap_dispc_irq_handler,
-			   0, MODULE_NAME, fbdev)) < 0) {
-		dev_err(dispc.fbdev->dev, "can't get DSS IRQ\n");
-		goto fail1;
-	}
-
-	/* L3 firewall setting: enable access to OCM RAM */
-	ram_fw_base = ioremap(0x68005000, SZ_1K);
-	if (!ram_fw_base) {
-		dev_err(dispc.fbdev->dev, "Cannot ioremap to enable OCM RAM\n");
-		goto fail1;
-	}
-	__raw_writel(0x402000b0, ram_fw_base + 0xa0);
-	iounmap(ram_fw_base);
-
-	if ((r = alloc_palette_ram()) < 0)
-		goto fail2;
-
-	if ((r = setup_fbmem(req_vram)) < 0)
-		goto fail3;
-
-	if (!skip_init) {
-		for (i = 0; i < dispc.mem_desc.region_cnt; i++) {
-			memset(dispc.mem_desc.region[i].vaddr, 0,
-				dispc.mem_desc.region[i].size);
-		}
-
-		/* Set logic clock to fck, pixel clock to fck/2 for now */
-		MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(16, 8), 1 << 16);
-		MOD_REG_FLD(DISPC_DIVISOR, FLD_MASK(0, 8), 2 << 0);
-
-		setup_plane_fifo(0, ext_mode);
-		setup_plane_fifo(1, ext_mode);
-		setup_plane_fifo(2, ext_mode);
-
-		setup_color_conv_coef();
-
-		set_lcd_tft_mode(panel->config & OMAP_LCDC_PANEL_TFT);
-		set_load_mode(DISPC_LOAD_FRAME_ONLY);
-
-		if (!ext_mode) {
-			set_lcd_data_lines(panel->data_lines);
-			omap_dispc_set_lcd_size(panel->x_res, panel->y_res);
-			set_lcd_timings();
-		} else
-			set_lcd_data_lines(panel->bpp);
-		enable_rfbi_mode(ext_mode);
-	}
-
-	l = dispc_read_reg(DISPC_REVISION);
-	pr_info("omapfb: DISPC version %d.%d initialized\n",
-		 l >> 4 & 0x0f, l & 0x0f);
-	enable_lcd_clocks(0);
-
-	return 0;
-fail3:
-	free_palette_ram();
-fail2:
-	free_irq(INT_24XX_DSS_IRQ, fbdev);
-fail1:
-	enable_lcd_clocks(0);
-	put_dss_clocks();
-fail0:
-	iounmap(dispc.base);
-	return r;
-}
-
-static void omap_dispc_cleanup(void)
-{
-	int i;
-
-	omap_dispc_set_update_mode(OMAPFB_UPDATE_DISABLED);
-	/* This will also disable clocks that are on */
-	for (i = 0; i < dispc.mem_desc.region_cnt; i++)
-		omap_dispc_enable_plane(i, 0);
-	cleanup_fbmem();
-	free_palette_ram();
-	free_irq(INT_24XX_DSS_IRQ, dispc.fbdev);
-	put_dss_clocks();
-	iounmap(dispc.base);
-}
-
-const struct lcd_ctrl omap2_int_ctrl = {
-	.name			= "internal",
-	.init			= omap_dispc_init,
-	.cleanup		= omap_dispc_cleanup,
-	.get_caps		= omap_dispc_get_caps,
-	.set_update_mode	= omap_dispc_set_update_mode,
-	.get_update_mode	= omap_dispc_get_update_mode,
-	.update_window		= omap_dispc_update_window,
-	.suspend		= omap_dispc_suspend,
-	.resume			= omap_dispc_resume,
-	.setup_plane		= omap_dispc_setup_plane,
-	.setup_mem		= omap_dispc_setup_mem,
-	.set_scale		= omap_dispc_set_scale,
-	.enable_plane		= omap_dispc_enable_plane,
-	.set_color_key		= omap_dispc_set_color_key,
-	.get_color_key		= omap_dispc_get_color_key,
-	.mmap			= omap_dispc_mmap_user,
-};
diff --git a/drivers/video/omap/dispc.h b/drivers/video/omap/dispc.h
deleted file mode 100644
index c15ea77..0000000
--- a/drivers/video/omap/dispc.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#ifndef _DISPC_H
-#define _DISPC_H
-
-#include <linux/interrupt.h>
-
-#define DISPC_PLANE_GFX			0
-#define DISPC_PLANE_VID1		1
-#define DISPC_PLANE_VID2		2
-
-#define DISPC_RGB_1_BPP			0x00
-#define DISPC_RGB_2_BPP			0x01
-#define DISPC_RGB_4_BPP			0x02
-#define DISPC_RGB_8_BPP			0x03
-#define DISPC_RGB_12_BPP		0x04
-#define DISPC_RGB_16_BPP		0x06
-#define DISPC_RGB_24_BPP		0x08
-#define DISPC_RGB_24_BPP_UNPACK_32	0x09
-#define DISPC_YUV2_422			0x0a
-#define DISPC_UYVY_422			0x0b
-
-#define DISPC_BURST_4x32		0
-#define DISPC_BURST_8x32		1
-#define DISPC_BURST_16x32		2
-
-#define DISPC_LOAD_CLUT_AND_FRAME	0x00
-#define DISPC_LOAD_CLUT_ONLY		0x01
-#define DISPC_LOAD_FRAME_ONLY		0x02
-#define DISPC_LOAD_CLUT_ONCE_FRAME	0x03
-
-#define DISPC_TFT_DATA_LINES_12		0
-#define DISPC_TFT_DATA_LINES_16		1
-#define DISPC_TFT_DATA_LINES_18		2
-#define DISPC_TFT_DATA_LINES_24		3
-
-extern void omap_dispc_set_lcd_size(int width, int height);
-
-extern void omap_dispc_enable_lcd_out(int enable);
-extern void omap_dispc_enable_digit_out(int enable);
-
-extern int omap_dispc_request_irq(unsigned long irq_mask,
-				   void (*callback)(void *data), void *data);
-extern void omap_dispc_free_irq(unsigned long irq_mask,
-				 void (*callback)(void *data), void *data);
-
-extern const struct lcd_ctrl omap2_int_ctrl;
-#endif
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/omap/omapfb.h
index af3c9e5..3a5ab13 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/omap/omapfb.h
@@ -207,11 +207,7 @@ struct omapfb_device {
 	struct platform_device	*dssdev;	/* dummy dev for clocks */
 };
 
-#ifdef CONFIG_ARCH_OMAP1
 extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
 
 extern void omapfb_register_panel(struct lcd_panel *panel);
 extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
index 440a5dd..73924bc 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/omap/omapfb_main.c
@@ -34,7 +34,6 @@
 
 #include "omapfb.h"
 #include "lcdc.h"
-#include "dispc.h"
 
 #define MODULE_NAME	"omapfb"
 
@@ -106,11 +105,7 @@ static struct platform_device omapdss_device = {
 extern struct lcd_ctrl hwa742_ctrl;
 
 static const struct lcd_ctrl *ctrls[] = {
-#ifdef CONFIG_ARCH_OMAP1
 	&omap1_int_ctrl,
-#else
-	&omap2_int_ctrl,
-#endif
 
 #ifdef CONFIG_FB_OMAP_LCDC_HWA742
 	&hwa742_ctrl,
@@ -118,11 +113,7 @@ static const struct lcd_ctrl *ctrls[] = {
 };
 
 #ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
-#ifdef CONFIG_ARCH_OMAP1
 extern struct lcd_ctrl_extif omap1_ext_if;
-#else
-extern struct lcd_ctrl_extif omap2_ext_if;
-#endif
 #endif
 
 static void omapfb_rqueue_lock(struct omapfb_device *fbdev)
@@ -1717,17 +1708,10 @@ static int omapfb_do_probe(struct platform_device *pdev,
 
 	mutex_init(&fbdev->rqueue_mutex);
 
-#ifdef CONFIG_ARCH_OMAP1
 	fbdev->int_ctrl = &omap1_int_ctrl;
 #ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
 	fbdev->ext_if = &omap1_ext_if;
 #endif
-#else	/* OMAP2 */
-	fbdev->int_ctrl = &omap2_int_ctrl;
-#ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
-	fbdev->ext_if = &omap2_ext_if;
-#endif
-#endif
 	if (omapfb_find_ctrl(fbdev) < 0) {
 		dev_err(fbdev->dev,
 			"LCD controller not found, board not supported\n");
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
deleted file mode 100644
index 2c1a340..0000000
--- a/drivers/video/omap/rfbi.c
+++ /dev/null
@@ -1,598 +0,0 @@
-/*
- * OMAP2 Remote Frame Buffer Interface support
- *
- * Copyright (C) 2005 Nokia Corporation
- * Author: Juha Yrjölä <juha.yrjola@xxxxxxxxx>
- *	   Imre Deak <imre.deak@xxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include "omapfb.h"
-#include "dispc.h"
-
-/* To work around an RFBI transfer rate limitation */
-#define OMAP_RFBI_RATE_LIMIT	1
-
-#define RFBI_BASE		0x48050800
-#define RFBI_REVISION		0x0000
-#define RFBI_SYSCONFIG		0x0010
-#define RFBI_SYSSTATUS		0x0014
-#define RFBI_CONTROL		0x0040
-#define RFBI_PIXEL_CNT		0x0044
-#define RFBI_LINE_NUMBER	0x0048
-#define RFBI_CMD		0x004c
-#define RFBI_PARAM		0x0050
-#define RFBI_DATA		0x0054
-#define RFBI_READ		0x0058
-#define RFBI_STATUS		0x005c
-#define RFBI_CONFIG0		0x0060
-#define RFBI_ONOFF_TIME0	0x0064
-#define RFBI_CYCLE_TIME0	0x0068
-#define RFBI_DATA_CYCLE1_0	0x006c
-#define RFBI_DATA_CYCLE2_0	0x0070
-#define RFBI_DATA_CYCLE3_0	0x0074
-#define RFBI_VSYNC_WIDTH	0x0090
-#define RFBI_HSYNC_WIDTH	0x0094
-
-#define DISPC_BASE		0x48050400
-#define DISPC_CONTROL		0x0040
-#define DISPC_IRQ_FRAMEMASK     0x0001
-
-static struct {
-	void __iomem	*base;
-	void		(*lcdc_callback)(void *data);
-	void		*lcdc_callback_data;
-	unsigned long	l4_khz;
-	int		bits_per_cycle;
-	struct omapfb_device *fbdev;
-	struct clk	*dss_ick;
-	struct clk	*dss1_fck;
-	unsigned	tearsync_pin_cnt;
-	unsigned	tearsync_mode;
-} rfbi;
-
-static inline void rfbi_write_reg(int idx, u32 val)
-{
-	__raw_writel(val, rfbi.base + idx);
-}
-
-static inline u32 rfbi_read_reg(int idx)
-{
-	return __raw_readl(rfbi.base + idx);
-}
-
-static int rfbi_get_clocks(void)
-{
-	rfbi.dss_ick = clk_get(&rfbi.fbdev->dssdev->dev, "ick");
-	if (IS_ERR(rfbi.dss_ick)) {
-		dev_err(rfbi.fbdev->dev, "can't get ick\n");
-		return PTR_ERR(rfbi.dss_ick);
-	}
-
-	rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "fck");
-	if (IS_ERR(rfbi.dss1_fck)) {
-		dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
-		clk_put(rfbi.dss_ick);
-		return PTR_ERR(rfbi.dss1_fck);
-	}
-
-	return 0;
-}
-
-static void rfbi_put_clocks(void)
-{
-	clk_put(rfbi.dss1_fck);
-	clk_put(rfbi.dss_ick);
-}
-
-static void rfbi_enable_clocks(int enable)
-{
-	if (enable) {
-		clk_enable(rfbi.dss_ick);
-		clk_enable(rfbi.dss1_fck);
-	} else {
-		clk_disable(rfbi.dss1_fck);
-		clk_disable(rfbi.dss_ick);
-	}
-}
-
-
-#ifdef VERBOSE
-static void rfbi_print_timings(void)
-{
-	u32 l;
-	u32 time;
-
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	time = 1000000000 / rfbi.l4_khz;
-	if (l & (1 << 4))
-		time *= 2;
-
-	dev_dbg(rfbi.fbdev->dev, "Tick time %u ps\n", time);
-	l = rfbi_read_reg(RFBI_ONOFF_TIME0);
-	dev_dbg(rfbi.fbdev->dev,
-		"CSONTIME %d, CSOFFTIME %d, WEONTIME %d, WEOFFTIME %d, "
-		"REONTIME %d, REOFFTIME %d\n",
-		l & 0x0f, (l >> 4) & 0x3f, (l >> 10) & 0x0f, (l >> 14) & 0x3f,
-		(l >> 20) & 0x0f, (l >> 24) & 0x3f);
-
-	l = rfbi_read_reg(RFBI_CYCLE_TIME0);
-	dev_dbg(rfbi.fbdev->dev,
-		"WECYCLETIME %d, RECYCLETIME %d, CSPULSEWIDTH %d, "
-		"ACCESSTIME %d\n",
-		(l & 0x3f), (l >> 6) & 0x3f, (l >> 12) & 0x3f,
-		(l >> 22) & 0x3f);
-}
-#else
-static void rfbi_print_timings(void) {}
-#endif
-
-static void rfbi_set_timings(const struct extif_timings *t)
-{
-	u32 l;
-
-	BUG_ON(!t->converted);
-
-	rfbi_enable_clocks(1);
-	rfbi_write_reg(RFBI_ONOFF_TIME0, t->tim[0]);
-	rfbi_write_reg(RFBI_CYCLE_TIME0, t->tim[1]);
-
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	l &= ~(1 << 4);
-	l |= (t->tim[2] ? 1 : 0) << 4;
-	rfbi_write_reg(RFBI_CONFIG0, l);
-
-	rfbi_print_timings();
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
-{
-	*clk_period = 1000000000 / rfbi.l4_khz;
-	*max_clk_div = 2;
-}
-
-static int ps_to_rfbi_ticks(int time, int div)
-{
-	unsigned long tick_ps;
-	int ret;
-
-	/* Calculate in picosecs to yield more exact results */
-	tick_ps = 1000000000 / (rfbi.l4_khz) * div;
-
-	ret = (time + tick_ps - 1) / tick_ps;
-
-	return ret;
-}
-
-#ifdef OMAP_RFBI_RATE_LIMIT
-static unsigned long rfbi_get_max_tx_rate(void)
-{
-	unsigned long	l4_rate, dss1_rate;
-	int		min_l4_ticks = 0;
-	int		i;
-
-	/* According to TI this can't be calculated so make the
-	 * adjustments for a couple of known frequencies and warn for
-	 * others.
-	 */
-	static const struct {
-		unsigned long l4_clk;		/* HZ */
-		unsigned long dss1_clk;		/* HZ */
-		unsigned long min_l4_ticks;
-	} ftab[] = {
-		{ 55,	132,	7, },		/* 7.86 MPix/s */
-		{ 110,	110,	12, },		/* 9.16 MPix/s */
-		{ 110,	132,	10, },		/* 11   Mpix/s */
-		{ 120,	120,	10, },		/* 12   Mpix/s */
-		{ 133,	133,	10, },		/* 13.3 Mpix/s */
-	};
-
-	l4_rate = rfbi.l4_khz / 1000;
-	dss1_rate = clk_get_rate(rfbi.dss1_fck) / 1000000;
-
-	for (i = 0; i < ARRAY_SIZE(ftab); i++) {
-		/* Use a window instead of an exact match, to account
-		 * for different DPLL multiplier / divider pairs.
-		 */
-		if (abs(ftab[i].l4_clk - l4_rate) < 3 &&
-		    abs(ftab[i].dss1_clk - dss1_rate) < 3) {
-			min_l4_ticks = ftab[i].min_l4_ticks;
-			break;
-		}
-	}
-	if (i == ARRAY_SIZE(ftab)) {
-		/* Can't be sure, return anyway the maximum not
-		 * rate-limited. This might cause a problem only for the
-		 * tearing synchronisation.
-		 */
-		dev_err(rfbi.fbdev->dev,
-			"can't determine maximum RFBI transfer rate\n");
-		return rfbi.l4_khz * 1000;
-	}
-	return rfbi.l4_khz * 1000 / min_l4_ticks;
-}
-#else
-static int rfbi_get_max_tx_rate(void)
-{
-	return rfbi.l4_khz * 1000;
-}
-#endif
-
-
-static int rfbi_convert_timings(struct extif_timings *t)
-{
-	u32 l;
-	int reon, reoff, weon, weoff, cson, csoff, cs_pulse;
-	int actim, recyc, wecyc;
-	int div = t->clk_div;
-
-	if (div <= 0 || div > 2)
-		return -1;
-
-	/* Make sure that after conversion it still holds that:
-	 * weoff > weon, reoff > reon, recyc >= reoff, wecyc >= weoff,
-	 * csoff > cson, csoff >= max(weoff, reoff), actim > reon
-	 */
-	weon = ps_to_rfbi_ticks(t->we_on_time, div);
-	weoff = ps_to_rfbi_ticks(t->we_off_time, div);
-	if (weoff <= weon)
-		weoff = weon + 1;
-	if (weon > 0x0f)
-		return -1;
-	if (weoff > 0x3f)
-		return -1;
-
-	reon = ps_to_rfbi_ticks(t->re_on_time, div);
-	reoff = ps_to_rfbi_ticks(t->re_off_time, div);
-	if (reoff <= reon)
-		reoff = reon + 1;
-	if (reon > 0x0f)
-		return -1;
-	if (reoff > 0x3f)
-		return -1;
-
-	cson = ps_to_rfbi_ticks(t->cs_on_time, div);
-	csoff = ps_to_rfbi_ticks(t->cs_off_time, div);
-	if (csoff <= cson)
-		csoff = cson + 1;
-	if (csoff < max(weoff, reoff))
-		csoff = max(weoff, reoff);
-	if (cson > 0x0f)
-		return -1;
-	if (csoff > 0x3f)
-		return -1;
-
-	l =  cson;
-	l |= csoff << 4;
-	l |= weon  << 10;
-	l |= weoff << 14;
-	l |= reon  << 20;
-	l |= reoff << 24;
-
-	t->tim[0] = l;
-
-	actim = ps_to_rfbi_ticks(t->access_time, div);
-	if (actim <= reon)
-		actim = reon + 1;
-	if (actim > 0x3f)
-		return -1;
-
-	wecyc = ps_to_rfbi_ticks(t->we_cycle_time, div);
-	if (wecyc < weoff)
-		wecyc = weoff;
-	if (wecyc > 0x3f)
-		return -1;
-
-	recyc = ps_to_rfbi_ticks(t->re_cycle_time, div);
-	if (recyc < reoff)
-		recyc = reoff;
-	if (recyc > 0x3f)
-		return -1;
-
-	cs_pulse = ps_to_rfbi_ticks(t->cs_pulse_width, div);
-	if (cs_pulse > 0x3f)
-		return -1;
-
-	l =  wecyc;
-	l |= recyc    << 6;
-	l |= cs_pulse << 12;
-	l |= actim    << 22;
-
-	t->tim[1] = l;
-
-	t->tim[2] = div - 1;
-
-	t->converted = 1;
-
-	return 0;
-}
-
-static int rfbi_setup_tearsync(unsigned pin_cnt,
-			       unsigned hs_pulse_time, unsigned vs_pulse_time,
-			       int hs_pol_inv, int vs_pol_inv, int extif_div)
-{
-	int hs, vs;
-	int min;
-	u32 l;
-
-	if (pin_cnt != 1 && pin_cnt != 2)
-		return -EINVAL;
-
-	hs = ps_to_rfbi_ticks(hs_pulse_time, 1);
-	vs = ps_to_rfbi_ticks(vs_pulse_time, 1);
-	if (hs < 2)
-		return -EDOM;
-	if (pin_cnt == 2)
-		min = 2;
-	else
-		min = 4;
-	if (vs < min)
-		return -EDOM;
-	if (vs == hs)
-		return -EINVAL;
-	rfbi.tearsync_pin_cnt = pin_cnt;
-	dev_dbg(rfbi.fbdev->dev,
-		"setup_tearsync: pins %d hs %d vs %d hs_inv %d vs_inv %d\n",
-		pin_cnt, hs, vs, hs_pol_inv, vs_pol_inv);
-
-	rfbi_enable_clocks(1);
-	rfbi_write_reg(RFBI_HSYNC_WIDTH, hs);
-	rfbi_write_reg(RFBI_VSYNC_WIDTH, vs);
-
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	if (hs_pol_inv)
-		l &= ~(1 << 21);
-	else
-		l |= 1 << 21;
-	if (vs_pol_inv)
-		l &= ~(1 << 20);
-	else
-		l |= 1 << 20;
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-static int rfbi_enable_tearsync(int enable, unsigned line)
-{
-	u32 l;
-
-	dev_dbg(rfbi.fbdev->dev, "tearsync %d line %d mode %d\n",
-		enable, line, rfbi.tearsync_mode);
-	if (line > (1 << 11) - 1)
-		return -EINVAL;
-
-	rfbi_enable_clocks(1);
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	l &= ~(0x3 << 2);
-	if (enable) {
-		rfbi.tearsync_mode = rfbi.tearsync_pin_cnt;
-		l |= rfbi.tearsync_mode << 2;
-	} else
-		rfbi.tearsync_mode = 0;
-	rfbi_write_reg(RFBI_CONFIG0, l);
-	rfbi_write_reg(RFBI_LINE_NUMBER, line);
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-static void rfbi_write_command(const void *buf, unsigned int len)
-{
-	rfbi_enable_clocks(1);
-	if (rfbi.bits_per_cycle == 16) {
-		const u16 *w = buf;
-		BUG_ON(len & 1);
-		for (; len; len -= 2)
-			rfbi_write_reg(RFBI_CMD, *w++);
-	} else {
-		const u8 *b = buf;
-		BUG_ON(rfbi.bits_per_cycle != 8);
-		for (; len; len--)
-			rfbi_write_reg(RFBI_CMD, *b++);
-	}
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_read_data(void *buf, unsigned int len)
-{
-	rfbi_enable_clocks(1);
-	if (rfbi.bits_per_cycle == 16) {
-		u16 *w = buf;
-		BUG_ON(len & ~1);
-		for (; len; len -= 2) {
-			rfbi_write_reg(RFBI_READ, 0);
-			*w++ = rfbi_read_reg(RFBI_READ);
-		}
-	} else {
-		u8 *b = buf;
-		BUG_ON(rfbi.bits_per_cycle != 8);
-		for (; len; len--) {
-			rfbi_write_reg(RFBI_READ, 0);
-			*b++ = rfbi_read_reg(RFBI_READ);
-		}
-	}
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_write_data(const void *buf, unsigned int len)
-{
-	rfbi_enable_clocks(1);
-	if (rfbi.bits_per_cycle == 16) {
-		const u16 *w = buf;
-		BUG_ON(len & 1);
-		for (; len; len -= 2)
-			rfbi_write_reg(RFBI_PARAM, *w++);
-	} else {
-		const u8 *b = buf;
-		BUG_ON(rfbi.bits_per_cycle != 8);
-		for (; len; len--)
-			rfbi_write_reg(RFBI_PARAM, *b++);
-	}
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_transfer_area(int width, int height,
-				void (callback)(void * data), void *data)
-{
-	u32 w;
-
-	BUG_ON(callback == NULL);
-
-	rfbi_enable_clocks(1);
-	omap_dispc_set_lcd_size(width, height);
-
-	rfbi.lcdc_callback = callback;
-	rfbi.lcdc_callback_data = data;
-
-	rfbi_write_reg(RFBI_PIXEL_CNT, width * height);
-
-	w = rfbi_read_reg(RFBI_CONTROL);
-	w |= 1;				/* enable */
-	if (!rfbi.tearsync_mode)
-		w |= 1 << 4;		/* internal trigger, reset by HW */
-	rfbi_write_reg(RFBI_CONTROL, w);
-
-	omap_dispc_enable_lcd_out(1);
-}
-
-static inline void _stop_transfer(void)
-{
-	u32 w;
-
-	w = rfbi_read_reg(RFBI_CONTROL);
-	rfbi_write_reg(RFBI_CONTROL, w & ~(1 << 0));
-	rfbi_enable_clocks(0);
-}
-
-static void rfbi_dma_callback(void *data)
-{
-	_stop_transfer();
-	rfbi.lcdc_callback(rfbi.lcdc_callback_data);
-}
-
-static void rfbi_set_bits_per_cycle(int bpc)
-{
-	u32 l;
-
-	rfbi_enable_clocks(1);
-	l = rfbi_read_reg(RFBI_CONFIG0);
-	l &= ~(0x03 << 0);
-
-	switch (bpc) {
-	case 8:
-		break;
-	case 16:
-		l |= 3;
-		break;
-	default:
-		BUG();
-	}
-	rfbi_write_reg(RFBI_CONFIG0, l);
-	rfbi.bits_per_cycle = bpc;
-	rfbi_enable_clocks(0);
-}
-
-static int rfbi_init(struct omapfb_device *fbdev)
-{
-	u32 l;
-	int r;
-
-	rfbi.fbdev = fbdev;
-	rfbi.base = ioremap(RFBI_BASE, SZ_1K);
-	if (!rfbi.base) {
-		dev_err(fbdev->dev, "can't ioremap RFBI\n");
-		return -ENOMEM;
-	}
-
-	if ((r = rfbi_get_clocks()) < 0)
-		return r;
-	rfbi_enable_clocks(1);
-
-	rfbi.l4_khz = clk_get_rate(rfbi.dss_ick) / 1000;
-
-	/* Reset */
-	rfbi_write_reg(RFBI_SYSCONFIG, 1 << 1);
-	while (!(rfbi_read_reg(RFBI_SYSSTATUS) & (1 << 0)));
-
-	l = rfbi_read_reg(RFBI_SYSCONFIG);
-	/* Enable autoidle and smart-idle */
-	l |= (1 << 0) | (2 << 3);
-	rfbi_write_reg(RFBI_SYSCONFIG, l);
-
-	/* 16-bit interface, ITE trigger mode, 16-bit data */
-	l = (0x03 << 0) | (0x00 << 2) | (0x01 << 5) | (0x02 << 7);
-	l |= (0 << 9) | (1 << 20) | (1 << 21);
-	rfbi_write_reg(RFBI_CONFIG0, l);
-
-	rfbi_write_reg(RFBI_DATA_CYCLE1_0, 0x00000010);
-
-	l = rfbi_read_reg(RFBI_CONTROL);
-	/* Select CS0, clear bypass mode */
-	l = (0x01 << 2);
-	rfbi_write_reg(RFBI_CONTROL, l);
-
-	r = omap_dispc_request_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback,
-				   NULL);
-	if (r < 0) {
-		dev_err(fbdev->dev, "can't get DISPC irq\n");
-		rfbi_enable_clocks(0);
-		return r;
-	}
-
-	l = rfbi_read_reg(RFBI_REVISION);
-	pr_info("omapfb: RFBI version %d.%d initialized\n",
-		(l >> 4) & 0x0f, l & 0x0f);
-
-	rfbi_enable_clocks(0);
-
-	return 0;
-}
-
-static void rfbi_cleanup(void)
-{
-	omap_dispc_free_irq(DISPC_IRQ_FRAMEMASK, rfbi_dma_callback, NULL);
-	rfbi_put_clocks();
-	iounmap(rfbi.base);
-}
-
-const struct lcd_ctrl_extif omap2_ext_if = {
-	.init			= rfbi_init,
-	.cleanup		= rfbi_cleanup,
-	.get_clk_info		= rfbi_get_clk_info,
-	.get_max_tx_rate	= rfbi_get_max_tx_rate,
-	.set_bits_per_cycle	= rfbi_set_bits_per_cycle,
-	.convert_timings	= rfbi_convert_timings,
-	.set_timings		= rfbi_set_timings,
-	.write_command		= rfbi_write_command,
-	.read_data		= rfbi_read_data,
-	.write_data		= rfbi_write_data,
-	.transfer_area		= rfbi_transfer_area,
-	.setup_tearsync		= rfbi_setup_tearsync,
-	.enable_tearsync	= rfbi_enable_tearsync,
-
-	.max_transmit_size	= (u32) ~0,
-};
-
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux