Since 3.2, the CONFIG_ARM_ATAG_DTB_COMPAT config allows
an old bootloader to still use ATAG to provide cmdline.
Remove chosen/bootargs from the DTS board files.
Signed-off-by: Benoit Cousson <b-cousson@xxxxxx>
Cc: Grant Likely <grant.likely@xxxxxxxxxxxx>
Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
---
arch/arm/boot/dts/omap3-beagle.dts | 9 ---------
arch/arm/boot/dts/omap4-panda.dts | 9 ---------
arch/arm/boot/dts/omap4-sdp.dts | 9 ---------
3 files changed, 0 insertions(+), 27 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index 9486be6..9f72cd4 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -13,15 +13,6 @@
model = "TI OMAP3 BeagleBoard";
compatible = "ti,omap3-beagle", "ti,omap3";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index c702657..9755ad5 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -13,15 +13,6 @@
model = "TI OMAP4 PandaBoard";
compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 066e28c..63c6b2b 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -13,15 +13,6 @@
model = "TI OMAP4 SDP board";
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
- /*
- * Since the initial device tree board file does not create any
- * devices (MMC, network...), the only way to boot is to provide a
- * ramdisk.
- */
- chosen {
- bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug";
- };
-
memory {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
