* Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> [111126 19:06]: > DPLL1 reprogramming to a different rate is actually blocked inside > omap1_select_table_rate(), resulting in the defalut rate of 60 MHz > always used instead of the one selected in .config. Fix it. > > Created against linux-3.2-rc2, tested on Amstrad Delta on top of > linux-omap/fixes. This too first requires something for boards to pass the supported rates. Tony > Signed-off-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx> > --- > arch/arm/mach-omap1/clock.c | 4 ---- > 1 files changed, 0 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c > index 3899176..962adbc 100644 > --- a/arch/arm/mach-omap1/clock.c > +++ b/arch/arm/mach-omap1/clock.c > @@ -200,10 +200,6 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) > if (ptr->xtal != ref_rate) > continue; > > - /* DPLL1 cannot be reprogrammed without risking system crash */ > - if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate) > - continue; > - > /* Can check only after xtal frequency check */ > if (ptr->rate <= rate) > break; > -- > 1.7.3.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
