Re: [PATCH v2 3/4] omap-serial: Add minimal device tree support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/22/2011 07:44 AM, Rajendra Nayak wrote:
> Adapt the driver to device tree and pass minimal platform
> data from device tree needed for console boot.
> No power management features will be suppported for now
> since it requires more tweaks around OCP settings
> to toggle forceidle/noidle/smaridle bits and handling

typo: smartidle

> remote wakeup and dynamic muxing.
> 
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>

Acked-by: Rob Herring <rob.herring@xxxxxxxxxxx>

Rob

> ---
>  .../devicetree/bindings/serial/omap_serial.txt     |   10 ++++
>  drivers/tty/serial/omap-serial.c                   |   45 ++++++++++++++++++-
>  2 files changed, 52 insertions(+), 3 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/serial/omap_serial.txt
> 
> diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
> new file mode 100644
> index 0000000..342eedd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
> @@ -0,0 +1,10 @@
> +OMAP UART controller
> +
> +Required properties:
> +- compatible : should be "ti,omap2-uart" for OMAP2 controllers
> +- compatible : should be "ti,omap3-uart" for OMAP3 controllers
> +- compatible : should be "ti,omap4-uart" for OMAP4 controllers
> +- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
> +
> +Optional properties:
> +- clock-frequency : frequency of the clock input to the UART
> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
> index f14b9c5..5aa524e 100644
> --- a/drivers/tty/serial/omap-serial.c
> +++ b/drivers/tty/serial/omap-serial.c
> @@ -38,6 +38,7 @@
>  #include <linux/serial_core.h>
>  #include <linux/irq.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/of.h>
>  
>  #include <plat/dma.h>
>  #include <plat/dmtimer.h>
> @@ -1324,6 +1325,19 @@ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
>  	return;
>  }
>  
> +static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev)
> +{
> +	struct omap_uart_port_info *omap_up_info;
> +
> +	omap_up_info = devm_kzalloc(dev, sizeof(*omap_up_info), GFP_KERNEL);
> +	if (!omap_up_info)
> +		return NULL; /* out of memory */
> +
> +	of_property_read_u32(dev->of_node, "clock-frequency",
> +					 &omap_up_info->uartclk);
> +	return omap_up_info;
> +}
> +
>  static int serial_omap_probe(struct platform_device *pdev)
>  {
>  	struct uart_omap_port	*up;
> @@ -1331,6 +1345,9 @@ static int serial_omap_probe(struct platform_device *pdev)
>  	struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
>  	int ret = -ENOSPC;
>  
> +	if (pdev->dev.of_node)
> +		omap_up_info = of_get_uart_port_info(&pdev->dev);
> +
>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	if (!mem) {
>  		dev_err(&pdev->dev, "no mem resource?\n");
> @@ -1375,9 +1392,20 @@ static int serial_omap_probe(struct platform_device *pdev)
>  	up->port.regshift = 2;
>  	up->port.fifosize = 64;
>  	up->port.ops = &serial_omap_pops;
> -	up->port.line = pdev->id;
> -	sprintf(up->name, "OMAP UART%d", up->port.line);
>  
> +	if (pdev->dev.of_node)
> +		up->port.line = of_alias_get_id(pdev->dev.of_node, "serial");
> +	else
> +		up->port.line = pdev->id;
> +
> +	if (up->port.line < 0) {
> +		dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n",
> +								up->port.line);
> +		ret = -ENODEV;
> +		goto err;
> +	}
> +
> +	sprintf(up->name, "OMAP UART%d", up->port.line);
>  	up->port.mapbase = mem->start;
>  	up->port.membase = ioremap(mem->start, resource_size(mem));
>  	if (!up->port.membase) {
> @@ -1530,7 +1558,7 @@ static int serial_omap_runtime_suspend(struct device *dev)
>  	if (!up)
>  		return -EINVAL;
>  
> -	if (!pdata->enable_wakeup)
> +	if (!pdata || !pdata->enable_wakeup)
>  		return 0;
>  
>  	if (pdata->get_context_loss_count)
> @@ -1591,12 +1619,23 @@ static const struct dev_pm_ops serial_omap_dev_pm_ops = {
>  				serial_omap_runtime_resume, NULL)
>  };
>  
> +#if defined(CONFIG_OF)
> +static const struct of_device_id omap_serial_of_match[] = {
> +	{ .compatible = "ti,omap2-uart" },
> +	{ .compatible = "ti,omap3-uart" },
> +	{ .compatible = "ti,omap4-uart" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, omap_serial_of_match);
> +#endif
> +
>  static struct platform_driver serial_omap_driver = {
>  	.probe          = serial_omap_probe,
>  	.remove         = serial_omap_remove,
>  	.driver		= {
>  		.name	= DRIVER_NAME,
>  		.pm	= &serial_omap_dev_pm_ops,
> +		.of_match_table = of_match_ptr(omap_serial_of_match),
>  	},
>  };
>  

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux