Current code registers voltage layer details for TWL PMIC even when a TWL
has not been registered. Fix this to only register the TWL with voltage
layer when the TWL PMIC is initialized by board-level code.
Signed-off-by: Kevin Hilman <khilman@xxxxxx>
---
arch/arm/mach-omap2/pm.c | 6 ++----
arch/arm/mach-omap2/twl-common.c | 11 +++++++++++
arch/arm/mach-omap2/twl-common.h | 3 +++
3 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 1e79bdf..00bff46 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -24,6 +24,7 @@
#include "powerdomain.h"
#include "clockdomain.h"
#include "pm.h"
+#include "twl-common.h"
static struct omap_device_pm_latency *pm_lats;
@@ -226,11 +227,8 @@ postcore_initcall(omap2_common_pm_init);
static int __init omap2_common_pm_late_init(void)
{
- /* Init the OMAP TWL parameters */
- omap3_twl_init();
- omap4_twl_init();
-
/* Init the voltage layer */
+ omap_pmic_late_init();
omap_voltage_late_init();
/* Initialize the voltages */
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 52243577..10b20c6 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -30,6 +30,7 @@
#include <plat/usb.h>
#include "twl-common.h"
+#include "pm.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
@@ -48,6 +49,16 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
+void __init omap_pmic_late_init(void)
+{
+ /* Init the OMAP TWL parameters (if PMIC has been registerd) */
+ if (!pmic_i2c_board_info.irq)
+ return;
+
+ omap3_twl_init();
+ omap4_twl_init();
+}
+
#if defined(CONFIG_ARCH_OMAP3)
static struct twl4030_usb_data omap3_usb_pdata = {
.usb_mode = T2_USB_MODE_ULPI,
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 5e83a5b..275dde8 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -1,6 +1,8 @@
#ifndef __OMAP_PMIC_COMMON__
#define __OMAP_PMIC_COMMON__
+#include <plat/irqs.h>
+
#define TWL_COMMON_PDATA_USB (1 << 0)
#define TWL_COMMON_PDATA_BCI (1 << 1)
#define TWL_COMMON_PDATA_MADC (1 << 2)
@@ -30,6 +32,7 @@ struct twl4030_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
+void omap_pmic_late_init(void);
static inline void omap2_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
