Support for the HTKW mcx board (TI AM3517 based) including serial,
Ethernet, I2C, USB host, HSMMC, DSS and RTC.
Signed-off-by: Ilya Yanok <yanok@xxxxxxxxxxx>
---
arch/arm/boot/dts/mcx.dts | 29 ++
arch/arm/mach-omap2/Kconfig | 5 +
arch/arm/mach-omap2/Makefile | 3 +
arch/arm/mach-omap2/board-mcx.c | 618 ++++++++++++++++++++++++++
arch/arm/plat-omap/include/plat/uncompress.h | 1 +
5 files changed, 656 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/mcx.dts
create mode 100644 arch/arm/mach-omap2/board-mcx.c
diff --git a/arch/arm/boot/dts/mcx.dts b/arch/arm/boot/dts/mcx.dts
new file mode 100644
index 0000000..c87df59
--- /dev/null
+++ b/arch/arm/boot/dts/mcx.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "am35xx.dtsi"
+
+/ {
+ model = "HTKW mcx";
+ compatible = "htkw,mcx";
+
+ /*
+ * Since the initial device tree board file does not create any
+ * devices (MMC, network...), the only way to boot is to provide a
+ * ramdisk.
+ */
+ chosen {
+ bootargs = "root=/dev/ram0 rw console=ttyO2,115200n8 initrd=0x81600000,20M ramdisk_size=20480 no_console_suspend debug earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+};
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c3d530b..3be9cc0 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -230,6 +230,11 @@ config MACH_OMAP_3430SDP
default y
select OMAP_PACKAGE_CBB
+config MACH_MCX
+ bool "htkw mcx board"
+ depends on ARCH_OMAP3
+ select OMAP_PACKAGE_CBB
+
config MACH_NOKIA_N800
bool
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 69ab1c0..913aa43 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -232,6 +232,9 @@ obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
+obj-$(CONFIG_MACH_MCX) += board-mcx.o \
+ omap_phy_internal.o \
+ hsmmc.o
# Platform specific device init code
diff --git a/arch/arm/mach-omap2/board-mcx.c b/arch/arm/mach-omap2/board-mcx.c
new file mode 100644
index 0000000..311e1fb
--- /dev/null
+++ b/arch/arm/mach-omap2/board-mcx.c
@@ -0,0 +1,618 @@
+/*
+ * Copyright (C) 2011 Ilya Yanok, Emcraft Systems
+ *
+ * Modified from mach-omap2/board-omap3beagle.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/opp.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mmc/host.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/davinci_emac.h>
+#include <linux/i2c/edt_ts.h>
+
+#include <mach/hardware.h>
+#include <mach/am35xx.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/omap_hwmod.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/omap_device.h>
+
+#include "mux.h"
+#include "control.h"
+#include "hsmmc.h"
+#include "common-board-devices.h"
+
+#define MCX_MDIO_FREQUENCY (1000000)
+
+static struct mdio_platform_data mcx_mdio_pdata = {
+ .bus_freq = MCX_MDIO_FREQUENCY,
+};
+
+static struct resource am3517_mdio_resources[] = {
+ {
+ .start = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET,
+ .end = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET +
+ SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device am3517_mdio_device = {
+ .name = "davinci_mdio",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(am3517_mdio_resources),
+ .resource = am3517_mdio_resources,
+ .dev.platform_data = &mcx_mdio_pdata,
+};
+
+static struct emac_platform_data mcx_emac_pdata = {
+ .rmii_en = 1,
+};
+
+static struct resource am3517_emac_resources[] = {
+ {
+ .start = AM35XX_IPSS_EMAC_BASE,
+ .end = AM35XX_IPSS_EMAC_BASE + 0x2FFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+ .end = INT_35XX_EMAC_C0_RXTHRESH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+ .end = INT_35XX_EMAC_C0_RX_PULSE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+ .end = INT_35XX_EMAC_C0_TX_PULSE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+ .end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device am3517_emac_device = {
+ .name = "davinci_emac",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(am3517_emac_resources),
+ .resource = am3517_emac_resources,
+};
+
+static void am3517_enable_ethernet_int(void)
+{
+ u32 regval;
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_TX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_MISC_PULSE_CLR |
+ AM35XX_CPGMAC_C0_RX_THRESH_CLR);
+ omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am3517_disable_ethernet_int(void)
+{
+ u32 regval;
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR |
+ AM35XX_CPGMAC_C0_TX_PULSE_CLR);
+ omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void mcx_ethernet_init(struct emac_platform_data *pdata)
+{
+ unsigned int regval;
+
+ pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET;
+ pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET;
+ pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET;
+ pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE;
+ pdata->version = EMAC_VERSION_2;
+ pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR;
+ pdata->interrupt_enable = am3517_enable_ethernet_int;
+ pdata->interrupt_disable = am3517_disable_ethernet_int;
+ am3517_emac_device.dev.platform_data = pdata;
+ platform_device_register(&am3517_emac_device);
+ platform_device_register(&am3517_mdio_device);
+ clk_add_alias(NULL, dev_name(&am3517_emac_device.dev),
+ "emac_clk", &am3517_emac_device.dev);
+ clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev),
+ "phy_clk", &am3517_emac_device.dev);
+
+ regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+ regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
+ omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+ regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+ return ;
+}
+
+static struct mtd_partition mcx_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
+ .size = 1 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 32 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+#define LCD_PWR_ENn 131
+#define HDMI_TRCVR_PDn 133
+#define LCD_BKLIGHT_EN 55
+#define LCD_LVL_SFHT_BUF_ENn 43
+
+static int lcd_enabled;
+static int dvi_enabled;
+
+static int mcx_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ if (dvi_enabled) {
+ printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+ return -EINVAL;
+ }
+
+ gpio_set_value(LCD_BKLIGHT_EN, 1);
+ lcd_enabled = 1;
+
+ return 0;
+}
+
+static void mcx_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+ gpio_set_value(LCD_BKLIGHT_EN, 0);
+ lcd_enabled = 0;
+}
+
+static struct panel_generic_dpi_data lcd_panel = {
+ .name = "focaltech_etm070003dh6",
+ .platform_enable = mcx_panel_enable_lcd,
+ .platform_disable = mcx_panel_disable_lcd,
+};
+
+static struct omap_dss_device mcx_lcd_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "lcd",
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd_panel,
+ .phy.dpi.data_lines = 24,
+};
+
+/*
+ * TV Output
+ */
+
+static int mcx_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void mcx_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+static struct omap_dss_device mcx_tv_device = {
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .name = "tv",
+ .driver_name = "venc",
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .platform_enable = mcx_panel_enable_tv,
+ .platform_disable = mcx_panel_disable_tv,
+};
+
+/*
+ * DVI/HDMI Output
+ */
+
+static int mcx_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ if (lcd_enabled) {
+ printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+ return -EINVAL;
+ }
+ dvi_enabled = 1;
+ gpio_set_value(HDMI_TRCVR_PDn, 1);
+ return 0;
+}
+
+static void mcx_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+ dvi_enabled = 0;
+ gpio_set_value(HDMI_TRCVR_PDn, 0);
+}
+
+static struct panel_generic_dpi_data dvi_panel = {
+ .platform_enable = mcx_panel_enable_dvi,
+ .platform_disable = mcx_panel_disable_dvi,
+};
+static struct omap_dss_device mcx_dvi_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "dvi",
+ .driver_name = "dvi",
+ .data = &dvi_panel,
+ .phy.dpi.data_lines = 24,
+};
+
+static struct omap_dss_device *mcx_dss_devices[] = {
+ &mcx_lcd_device,
+ &mcx_tv_device,
+ &mcx_dvi_device,
+};
+
+static struct omap_dss_board_info mcx_dss_data = {
+ .num_devices = ARRAY_SIZE(mcx_dss_devices),
+ .devices = mcx_dss_devices,
+ .default_device = &mcx_lcd_device,
+};
+
+static void __init mcx_display_init(void)
+{
+ int r;
+
+ /* disable LCD backlight */
+ r = gpio_request(LCD_BKLIGHT_EN, "LCD_BKLIGHT_EN");
+ if (r) {
+ printk(KERN_ERR "failed to get LCD_BKLIGHT_EN gpio\n");
+ goto err_1;
+ }
+ omap_mux_init_gpio(LCD_BKLIGHT_EN, OMAP_PIN_OUTPUT);
+ gpio_direction_output(LCD_BKLIGHT_EN, 0);
+
+ /* Enable VIO-> 3.3v level shifter */
+ r = gpio_request(LCD_LVL_SFHT_BUF_ENn, "LCD_LVL_SFHT_BUF_ENn");
+ if (r) {
+ printk(KERN_ERR "failed to get LCD_LVL_SFHT_BUF_ENn gpio\n");
+ goto err_2;
+ }
+ omap_mux_init_gpio(LCD_LVL_SFHT_BUF_ENn, OMAP_PIN_OUTPUT);
+ gpio_direction_output(LCD_LVL_SFHT_BUF_ENn, 0);
+
+ /* Enable LCD panel VCC */
+
+ r = gpio_request(LCD_PWR_ENn, "LCD_PWR_ENn");
+ if (r) {
+ printk(KERN_ERR "failed to get LCD_PWR_ENn\n");
+ goto err_3;
+ }
+ omap_mux_init_gpio(LCD_PWR_ENn, OMAP_PIN_OUTPUT);
+
+ gpio_direction_output(LCD_PWR_ENn, 0);
+
+ /* Disable HDMI transceiver */
+ r = gpio_request(HDMI_TRCVR_PDn, "HDMI_TRCVR_PDn");
+ if (r) {
+ printk(KERN_ERR "failed to get HDMI_TRCVR_PDn\n");
+ goto err_4;
+ }
+ omap_mux_init_gpio(HDMI_TRCVR_PDn, OMAP_PIN_OUTPUT);
+ gpio_direction_output(HDMI_TRCVR_PDn, 0);
+
+ omap_display_init(&mcx_dss_data);
+
+ return;
+
+err_4:
+ gpio_free(HDMI_TRCVR_PDn);
+err_3:
+ gpio_free(LCD_LVL_SFHT_BUF_ENn);
+err_2:
+ gpio_free(LCD_LVL_SFHT_BUF_ENn);
+err_1:
+ gpio_free(LCD_BKLIGHT_EN);
+}
+
+/* TPS65023 specific initialization */
+/* VDCDC1 -> VDD_CORE */
+static struct regulator_consumer_supply am3517_vdcdc1_supplies[] = {
+ {
+ .supply = "vdd_core",
+ },
+};
+
+/* VDCDC2 -> VDDSHV */
+static struct regulator_consumer_supply am3517_vdcdc2_supplies[] = {
+ {
+ .supply = "vddshv",
+ },
+};
+
+/*
+ * VDCDC2 |-> VDDS
+ * |-> VDDS_SRAM_CORE_BG
+ * |-> VDDS_SRAM_MPU
+ */
+static struct regulator_consumer_supply am3517_vdcdc3_supplies[] = {
+ {
+ .supply = "vdds",
+ },
+ {
+ .supply = "vdds_sram_core_bg",
+ },
+ {
+ .supply = "vdds_sram_mpu",
+ },
+};
+
+/*
+ * LDO1 |-> VDDA1P8V_USBPHY
+ * |-> VDDA_DAC
+ */
+static struct regulator_consumer_supply am3517_ldo1_supplies[] = {
+ {
+ .supply = "vdda1p8v_usbphy",
+ },
+ {
+ .supply = "vdda_dac",
+ },
+};
+
+/* LDO2 -> VDDA3P3V_USBPHY */
+static struct regulator_consumer_supply am3517_ldo2_supplies[] = {
+ {
+ .supply = "vdda3p3v_usbphy",
+ },
+};
+
+static struct regulator_init_data mcx_regulator_data[] = {
+ /* DCDC1 */
+ {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .always_on = true,
+ .apply_uV = false,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc1_supplies),
+ .consumer_supplies = am3517_vdcdc1_supplies,
+ },
+ /* DCDC2 */
+ {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .always_on = true,
+ .apply_uV = false,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc2_supplies),
+ .consumer_supplies = am3517_vdcdc2_supplies,
+ },
+ /* DCDC3 */
+ {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .always_on = true,
+ .apply_uV = false,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(am3517_vdcdc3_supplies),
+ .consumer_supplies = am3517_vdcdc3_supplies,
+ },
+ /* LDO1 */
+ {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .always_on = false,
+ .apply_uV = false,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(am3517_ldo1_supplies),
+ .consumer_supplies = am3517_ldo1_supplies,
+ },
+ /* LDO2 */
+ {
+ .constraints = {
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .always_on = false,
+ .apply_uV = false,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(am3517_ldo2_supplies),
+ .consumer_supplies = am3517_ldo2_supplies,
+ },
+};
+
+static struct i2c_board_info __initdata mcx_i2c1_devices[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+ {
+ I2C_BOARD_INFO("tps65023", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .platform_data = &mcx_regulator_data[0],
+ },
+};
+
+#define TOUCH_INT_GPIO 170
+
+static struct edt_platform_data edt_ts_data = {
+ .irq_gpio = TOUCH_INT_GPIO,
+};
+
+static int __init mcx_ts_init(void)
+{
+ struct i2c_board_info mcx_edt_ts[] = {
+ {
+ I2C_BOARD_INFO("edt_ts", 0x38),
+ .platform_data = &edt_ts_data,
+ },
+ };
+
+ if (gpio_request(TOUCH_INT_GPIO, "TOUCH_INT")) {
+ printk(KERN_ERR "failed to get TOUCH_INT gpio\n");
+ return 1;
+ }
+
+ gpio_direction_input(TOUCH_INT_GPIO);
+
+ i2c_register_board_info(3, mcx_edt_ts, 1);
+
+ return 0;
+}
+
+static int __init mcx_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 400, mcx_i2c1_devices,
+ ARRAY_SIZE(mcx_i2c1_devices));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ mcx_ts_init();
+ return 0;
+}
+
+#define USB_HOST_PWR_EN 132
+#define USB_PHY1_RESET 154
+#define USB_PHY2_RESET 152
+
+static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+
+ .phy_reset = true,
+ .reset_gpio_port[0] = USB_PHY1_RESET,
+ .reset_gpio_port[1] = USB_PHY2_RESET,
+ .reset_gpio_port[2] = -EINVAL
+};
+
+#define SD_CARD_WP 65
+
+static struct omap2_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = SD_CARD_WP,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34 |
+ MMC_VDD_165_195,
+ },
+ {} /* Terminator */
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ OMAP3_MUX(CHASSIS_DMAREQ3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA | OMAP_PULL_UP),
+ OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(UART1_RTS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP3_MUX(UART1_CTS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA | OMAP_PULL_UP),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+static void __init mcx_init(void)
+{
+ omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+ mcx_i2c_init();
+ omap_serial_init();
+
+ mcx_display_init();
+
+ /* Configure EHCI ports */
+ gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN");
+ omap_mux_init_gpio(USB_HOST_PWR_EN, OMAP_PIN_OUTPUT);
+ gpio_direction_output(USB_HOST_PWR_EN, 1);
+
+ omap_mux_init_gpio(USB_PHY1_RESET, OMAP_PIN_OUTPUT);
+ omap_mux_init_gpio(USB_PHY2_RESET, OMAP_PIN_OUTPUT);
+ usbhs_init(&usbhs_bdata);
+ omap_nand_flash_init(NAND_BUSWIDTH_16, mcx_nand_partitions,
+ ARRAY_SIZE(mcx_nand_partitions));
+ /*Ethernet*/
+ mcx_ethernet_init(&mcx_emac_pdata);
+
+ /* MMC init */
+ omap_mux_init_gpio(SD_CARD_WP, OMAP_PIN_INPUT);
+ omap2_hsmmc_init(mmc);
+}
+
+static const char *mcx_dt_match[] __initdata = {
+ "htkw,mcx",
+ NULL
+};
+
+MACHINE_START(MCX, "htkw mcx")
+ /* Maintainer: Ilya Yanok */
+ .atag_offset = 0x100,
+ .reserve = omap_reserve,
+ .map_io = omap3_map_io,
+ .init_early = am35xx_init_early,
+ .init_irq = omap3_init_irq,
+ .init_machine = mcx_init,
+ .timer = &omap3_timer,
+ .dt_compat = mcx_dt_match,
+MACHINE_END
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 2d45ea3..5a1bb62 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -168,6 +168,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_OMAP3(3, omap_ldp);
DEBUG_LL_OMAP3(3, overo);
DEBUG_LL_OMAP3(3, touchbook);
+ DEBUG_LL_OMAP3(3, mcx);
/* omap4 based boards using UART3 */
DEBUG_LL_OMAP4(3, omap_4430sdp);
--
1.7.6.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
