Hi Tony, This one is stand alone and can be applied to fixes. I will re spin the rest in a couple of hours. Thanks On 10/19/11 18:46, Igor Grinberg wrote: > OMAP pin mux configuration API has been used incorrectly resulting > in wrong mux mode set for several DSS pins. > > Signed-off-by: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> > --- > arch/arm/mach-omap2/board-cm-t35.c | 32 ++++++++++++++++++-------------- > 1 files changed, 18 insertions(+), 14 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c > index 3201c9e..023b768 100644 > --- a/arch/arm/mach-omap2/board-cm-t35.c > +++ b/arch/arm/mach-omap2/board-cm-t35.c > @@ -600,24 +600,28 @@ static void __init cm_t3x_common_dss_mux_init(int mux_mode) > > static void __init cm_t35_init_mux(void) > { > - omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); > - cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); > + int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT; > + > + omap_mux_init_signal("dss_data0.dss_data0", mux_mode); > + omap_mux_init_signal("dss_data1.dss_data1", mux_mode); > + omap_mux_init_signal("dss_data2.dss_data2", mux_mode); > + omap_mux_init_signal("dss_data3.dss_data3", mux_mode); > + omap_mux_init_signal("dss_data4.dss_data4", mux_mode); > + omap_mux_init_signal("dss_data5.dss_data5", mux_mode); > + cm_t3x_common_dss_mux_init(mux_mode); > } > > static void __init cm_t3730_init_mux(void) > { > - omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); > - omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); > - cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); > + int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT; > + > + omap_mux_init_signal("sys_boot0", mux_mode); > + omap_mux_init_signal("sys_boot1", mux_mode); > + omap_mux_init_signal("sys_boot3", mux_mode); > + omap_mux_init_signal("sys_boot4", mux_mode); > + omap_mux_init_signal("sys_boot5", mux_mode); > + omap_mux_init_signal("sys_boot6", mux_mode); > + cm_t3x_common_dss_mux_init(mux_mode); > } > #else > static inline void cm_t35_init_mux(void) {} -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html