Am 03.11.2011 19:30, schrieb Tony Lindgren:
> * Tony Lindgren <tony@xxxxxxxxxxx> [111102 09:41]:
>> * Thomas Weber <thomas.weber.linux@xxxxxxxxxxxxxx> [111102 04:03]:
>>> Am 27.10.2011 07:32, schrieb Nori, Sekhar:
>>>> On Wed, Oct 12, 2011 at 17:33:56, Thomas Weber wrote:
>>>>> When building for OMAP3 only I get the
>>>>> following errors:
> ...
>
>>>> I was facing the same problem and this patch helped
>>>> me get rid of it.
>>>>
>>>> Tested-by: Sekhar Nori <nsekhar@xxxxxx>
>>> Hello Tony,
>>>
>>> what is the status of this patch?
>>>
>>> There is also another patch fixing the same problem.
>>>
>>> [PATCH v2] arm: omap: Fix errors and warnings when building for one board
>> Well looks like we got the initial DT changes merged! Only two
>> minor patches needed for compile errors that I just posted.
>>
>> Will take a look at this and other fixes needed to fixes-part2
>> next.
> Considering we now have the DT branch merged, I'll apply the earlier
> patch from Sanjeev with a minor modification to avoid a build
> warning in board-generic.c.
>
> Updated patch below, Sekhar & Thomas, care to ack?
>
> Regards,
>
> Tony
>
>
> From: Sanjeev Premi <premi@xxxxxx>
> Date: Thu, 13 Oct 2011 21:44:10 +0530
> Subject: [PATCH] ARM: OMAP: Fix errors and warnings when building for one board
>
> When customizing omap2plus_defconfig to build for only
> one board (omap3evm), I came across these warnings and
> errors (filenames truncated):
>
> arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used
> arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early':
> arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x'
> arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init'
> arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init'
> arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init'
> arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init'
> arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early':
> arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x'
> arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init'
> arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init'
> arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init'
> arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init'
> arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early':
> arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x'
> arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init'
> arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init'
> arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init'
> arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init'
>
> This patch fixes them.
>
> Signed-off-by: Sanjeev Premi <premi@xxxxxx>
> [tony@xxxxxxxxxxx: updated to fix warnings for board-generic.c]
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
>
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -28,6 +28,7 @@
> * XXX: Still needed to boot until the i2c & twl driver is adapted to
> * device-tree
> */
> +#ifdef CONFIG_ARCH_OMAP4
> static struct twl4030_platform_data sdp4430_twldata = {
> .irq_base = TWL6030_IRQ_BASE,
> .irq_end = TWL6030_IRQ_END,
> @@ -37,7 +38,9 @@ static void __init omap4_i2c_init(void)
> {
> omap4_pmic_init("twl6030", &sdp4430_twldata);
> }
> +#endif
>
> +#ifdef CONFIG_ARCH_OMAP3
> static struct twl4030_platform_data beagle_twldata = {
> .irq_base = TWL4030_IRQ_BASE,
> .irq_end = TWL4030_IRQ_END,
> @@ -47,6 +50,7 @@ static void __init omap3_i2c_init(void)
> {
> omap3_pmic_init("twl4030", &beagle_twldata);
> }
> +#endif
>
> static struct of_device_id omap_dt_match_table[] __initdata = {
> { .compatible = "simple-bus", },
> @@ -72,17 +76,21 @@ static void __init omap_generic_init(void)
> of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
> }
>
> +#ifdef CONFIG_ARCH_OMAP4
> static void __init omap4_init(void)
> {
> omap4_i2c_init();
> omap_generic_init();
> }
> +#endif
>
> +#ifdef CONFIG_ARCH_OMAP3
> static void __init omap3_init(void)
> {
> omap3_i2c_init();
> omap_generic_init();
> }
> +#endif
>
> #if defined(CONFIG_SOC_OMAP2420)
> static const char *omap242x_boards_compat[] __initdata = {
> --- a/arch/arm/mach-omap2/io.c
> +++ b/arch/arm/mach-omap2/io.c
> @@ -359,6 +359,7 @@ static void __init omap_hwmod_init_postsetup(void)
> omap_pm_if_early_init();
> }
>
> +#ifdef CONFIG_ARCH_OMAP2
> void __init omap2420_init_early(void)
> {
> omap2_set_globals_242x();
> @@ -382,11 +383,13 @@ void __init omap2430_init_early(void)
> omap_hwmod_init_postsetup();
> omap2430_clk_init();
> }
> +#endif
>
> /*
> * Currently only board-omap3beagle.c should call this because of the
> * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
> */
> +#ifdef CONFIG_ARCH_OMAP3
> void __init omap3_init_early(void)
> {
> omap2_set_globals_3xxx();
> @@ -430,7 +433,9 @@ void __init ti816x_init_early(void)
> omap_hwmod_init_postsetup();
> omap3xxx_clk_init();
> }
> +#endif
>
> +#ifdef CONFIG_ARCH_OMAP4
> void __init omap4430_init_early(void)
> {
> omap2_set_globals_443x();
> @@ -442,6 +447,7 @@ void __init omap4430_init_early(void)
> omap_hwmod_init_postsetup();
> omap4xxx_clk_init();
> }
> +#endif
>
> void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
> struct omap_sdrc_params *sdrc_cs1)
Acked-by: Thomas Weber <weber@xxxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
