Create an rpmsg virtio device to allow message-based communication with the remote processor (but only if supported by its firmware). There are several advantages to provide this functionality at the remoteproc-level: - to support it, platforms only have to provide their own ->kick() handler; no need to duplicate the rest of the code. - the virtio device is created only when the remote processor is registered and ready to go. No need to depend on initcall magic. moreover, we only add the virtio device if the firmware really supports it, and only after we know the supported virtio device features. - correct device model hierarchy can be set, so we can use device-based API cleanly (e.g. power management, DMA API, ...). - when the remote processor crashes (or removed) we only need to remove the virtio device, and the driver core will take care of the rest. No need to implement any out-of-bound notifiers. - we can now easily bind the virtio device to its rproc handle, and this way we don't need any name-based remoteproc ->get() API. Currently we only support creating a single rpmsg virtio device per remote processor, but later this is going to be extended to support creating numerous virtio devices of other types too (block, net, console...). Designed with Brian Swetland <swetland@xxxxxxxxxx>. Signed-off-by: Ohad Ben-Cohen <ohad@xxxxxxxxxx> Cc: Brian Swetland <swetland@xxxxxxxxxx> Cc: Arnd Bergmann <arnd@xxxxxxxx> Cc: Grant Likely <grant.likely@xxxxxxxxxxxx> Cc: Tony Lindgren <tony@xxxxxxxxxxx> Cc: Russell King <linux@xxxxxxxxxxxxxxxx> Cc: Rusty Russell <rusty@xxxxxxxxxxxxxxx> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> Cc: Greg KH <greg@xxxxxxxxx> Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx> --- drivers/amp/remoteproc/Makefile | 3 +- drivers/amp/remoteproc/remoteproc_rpmsg.c | 297 +++++++++++++++++++++++++++++ 2 files changed, 299 insertions(+), 1 deletions(-) create mode 100644 drivers/amp/remoteproc/remoteproc_rpmsg.c diff --git a/drivers/amp/remoteproc/Makefile b/drivers/amp/remoteproc/Makefile index b888c37..0a24a3b 100644 --- a/drivers/amp/remoteproc/Makefile +++ b/drivers/amp/remoteproc/Makefile @@ -4,4 +4,5 @@ obj-$(CONFIG_REMOTEPROC) += remoteproc.o remoteproc-y := remoteproc_core.o -remoteproc-y += remoteproc_debugfs.o \ No newline at end of file +remoteproc-y += remoteproc_debugfs.o +remoteproc-y += remoteproc_rpmsg.o \ No newline at end of file diff --git a/drivers/amp/remoteproc/remoteproc_rpmsg.c b/drivers/amp/remoteproc/remoteproc_rpmsg.c new file mode 100644 index 0000000..b319e54 --- /dev/null +++ b/drivers/amp/remoteproc/remoteproc_rpmsg.c @@ -0,0 +1,297 @@ +/* + * Remote processor messaging transport (OMAP platform-specific bits) + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * Ohad Ben-Cohen <ohad@xxxxxxxxxx> + * Brian Swetland <swetland@xxxxxxxxxx> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/amp/remoteproc.h> +#include <linux/amp/rpmsg.h> +#include <linux/virtio.h> +#include <linux/virtio_config.h> +#include <linux/virtio_ids.h> +#include <linux/virtio_ring.h> +#include <linux/err.h> +#include <linux/kref.h> +#include <linux/slab.h> + +#include "remoteproc_internal.h" + +/** + * struct rproc_virtio_vq_info - virtqueue state + * @vq_id: a unique index of this virtqueue (unique for this @rproc) + * @rproc: handle to the remote processor + * + * Such a struct will be maintained for every virtqueue we're + * using to communicate with the remote processor + */ +struct rproc_virtio_vq_info { + __u16 vq_id; + struct rproc *rproc; +}; + +/* kick the remote processor, and let it know which virtqueue to poke at */ +static void rproc_virtio_notify(struct virtqueue *vq) +{ + struct rproc_virtio_vq_info *rpvq = vq->priv; + struct rproc *rproc = rpvq->rproc; + + dev_dbg(rproc->dev, "kicking vq id: %d\n", rpvq->vq_id); + + rproc->ops->kick(rproc, rpvq->vq_id); +} + +/** + * rproc_vq_interrupt() - tell remoteproc that a virtqueue is interrupted + * @rproc: handle to the remote processor + * @vq_id: index of the signalled virtqueue + * + * This function should be called by the platform-specific rproc driver, + * when the remote processor signals that a specific virtqueue has pending + * messages available. + * + * Returns IRQ_NONE if no message was found in the @vq_id virtqueue, + * and otherwise returns IRQ_HANDLED. + */ +irqreturn_t rproc_vq_interrupt(struct rproc *rproc, int vq_id) +{ + return vring_interrupt(0, rproc->rvdev->vq[vq_id]); +} +EXPORT_SYMBOL(rproc_vq_interrupt); + +static struct virtqueue *rp_find_vq(struct virtio_device *vdev, + unsigned id, + void (*callback)(struct virtqueue *vq), + const char *name) +{ + struct rproc *rproc = vdev_to_rproc(vdev); + struct rproc_vdev *rvdev = rproc->rvdev; + struct rproc_virtio_vq_info *rpvq; + struct virtqueue *vq; + void *addr; + int ret, len; + + rpvq = kmalloc(sizeof(*rpvq), GFP_KERNEL); + if (!rpvq) + return ERR_PTR(-ENOMEM); + + rpvq->rproc = rproc; + rpvq->vq_id = id; + + addr = rvdev->vring[id].va; + len = rvdev->vring[id].len; + + dev_dbg(rproc->dev, "vring%d: va %p qsz %d\n", id, addr, len); + + vq = vring_new_virtqueue(len, AMP_VRING_ALIGN, vdev, addr, + rproc_virtio_notify, callback, name); + if (!vq) { + dev_err(rproc->dev, "vring_new_virtqueue %s failed\n", name); + ret = -ENOMEM; + goto free_rpvq; + } + + rvdev->vq[id] = vq; + vq->priv = rpvq; + + return vq; + +free_rpvq: + kfree(rpvq); + return ERR_PTR(ret); +} + +static void rproc_virtio_del_vqs(struct virtio_device *vdev) +{ + struct virtqueue *vq, *n; + struct rproc *rproc = vdev_to_rproc(vdev); + + list_for_each_entry_safe(vq, n, &vdev->vqs, list) { + struct rproc_virtio_vq_info *rpvq = vq->priv; + vring_del_virtqueue(vq); + kfree(rpvq); + } + + /* power down the remote processor */ + rproc_shutdown(rproc); +} + +static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs, + struct virtqueue *vqs[], + vq_callback_t *callbacks[], + const char *names[]) +{ + struct rproc *rproc = vdev_to_rproc(vdev); + int i, ret; + + /* we maintain two virtqueues per remote processor (for RX and TX) */ + if (nvqs != 2) + return -EINVAL; + + /* boot the remote processor */ + ret = rproc_boot(rproc); + if (ret) { + dev_err(rproc->dev, "rproc_boot() failed %d\n", ret); + goto error; + } + + for (i = 0; i < nvqs; ++i) { + vqs[i] = rp_find_vq(vdev, i, callbacks[i], names[i]); + if (IS_ERR(vqs[i])) { + ret = PTR_ERR(vqs[i]); + goto error; + } + } + + return 0; + +error: + rproc_virtio_del_vqs(vdev); + return ret; +} + +/* + * We don't support yet real virtio status semantics. + * + * The plan is to provide this via the VIRTIO HDR resource entry + * which is part of the firmware: this way the remote processor + * will be able to access the status values as set by us. + */ +static u8 rproc_virtio_get_status(struct virtio_device *vdev) +{ + return 0; +} + +static void rproc_virtio_set_status(struct virtio_device *vdev, u8 status) +{ + dev_dbg(&vdev->dev, "new status: %d\n", status); +} + +static void rproc_virtio_reset(struct virtio_device *vdev) +{ + dev_dbg(&vdev->dev, "reset !\n"); +} + +/* provide the vdev features as retrieved from the firmware */ +static u32 rproc_virtio_get_features(struct virtio_device *vdev) +{ + struct rproc *rproc = vdev_to_rproc(vdev); + + /* we only support a single vdev device for now */ + return rproc->rvdev->dfeatures; +} + +static void rproc_virtio_finalize_features(struct virtio_device *vdev) +{ + struct rproc *rproc = vdev_to_rproc(vdev); + + /* Give virtio_ring a chance to accept features */ + vring_transport_features(vdev); + + /* + * Remember the finalized features of our vdev, and provide it + * to the remote processor once it is powered on. + * + * Similarly to the status field, we don't expose yet the negotiated + * features to the remote processors at this point. This will be + * fixed as part of a small resource table overhaul and then an + * extension of the virtio resource entries. + */ + rproc->rvdev->gfeatures = vdev->features[0]; +} + +static struct virtio_config_ops rproc_virtio_config_ops = { + .get_features = rproc_virtio_get_features, + .finalize_features = rproc_virtio_finalize_features, + .find_vqs = rproc_virtio_find_vqs, + .del_vqs = rproc_virtio_del_vqs, + .reset = rproc_virtio_reset, + .set_status = rproc_virtio_set_status, + .get_status = rproc_virtio_get_status, +}; + +/* + * This function is called whenever vdev is released, and is responsible + * to decrement the remote processor's refcount taken when vdev was + * added. + * + * Never call this function directly; it will be called by the driver + * core when needed. + */ +static void rproc_vdev_release(struct device *dev) +{ + struct virtio_device *vdev = dev_to_virtio(dev); + struct rproc *rproc = vdev_to_rproc(vdev); + + kref_put(&rproc->refcount, rproc_release); +} + +/** + * rproc_add_rpmsg_vdev() - create an rpmsg virtio device + * @rproc: the rproc handle + * + * This function is called if virtio rpmsg support was found in the + * firmware of the remote processor. + * + * Today we only support creating a single rpmsg vdev (virtio device), + * but the plan is to remove this limitation. At that point this interface + * will be revised/extended. + */ +int rproc_add_rpmsg_vdev(struct rproc *rproc) +{ + struct device *dev = rproc->dev; + struct rproc_vdev *rvdev = rproc->rvdev; + int ret; + + rvdev->vdev.id.device = VIRTIO_ID_RPMSG, + rvdev->vdev.config = &rproc_virtio_config_ops, + rvdev->vdev.dev.parent = dev; + rvdev->vdev.dev.release = rproc_vdev_release; + + /* + * We're indirectly making a non-temporary copy of the rproc pointer + * here, because drivers probed with this vdev will indirectly + * access the wrapping rproc. + * + * Therefore we must increment the rproc refcount here, and decrement + * it _only_ when the vdev is released. + */ + kref_get(&rproc->refcount); + + ret = register_virtio_device(&rvdev->vdev); + if (ret) { + kref_put(&rproc->refcount, rproc_release); + dev_err(dev, "failed to register vdev: %d\n", ret); + } + + return ret; +} + +/** + * rproc_remove_rpmsg_vdev() - remove an rpmsg vdev device + * @rproc: the rproc handle + * + * This function is called whenever @rproc is removed _iff_ an rpmsg + * vdev was created beforehand. + */ +void rproc_remove_rpmsg_vdev(struct rproc *rproc) +{ + struct rproc_vdev *rvdev = rproc->rvdev; + + unregister_virtio_device(&rvdev->vdev); +} + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("OMAP Remote processor messaging virtio device"); -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html