From: Benoit Cousson <b-cousson@xxxxxx>
Following 2 hwmod structures are added
1. usb_host_hs
The hwmod of usbhs with uhh, ehci and ohci base addresses
functional clock and ehci, ohci irqs
2. usb_tll_hs
hwmod of usbhs with the TLL base address and irq.
Signed-off-by: Benoit Cousson <b-cousson@xxxxxx>
- rebased to kernel version 3.0
- Workarounds for hardware issues
Signed-off-by: Keshava Munegowda <keshava_mgowda@xxxxxx>
Reviewed-by: Partha Basak <parthab@xxxxxxxxxxxx>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 206 +++++++++++++++++++++++++++-
1 files changed, 205 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 6201422..e404fd6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -68,6 +68,8 @@ static struct omap_hwmod omap44xx_mmc2_hwmod;
static struct omap_hwmod omap44xx_mpu_hwmod;
static struct omap_hwmod omap44xx_mpu_private_hwmod;
static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
/*
* Interconnects omap_hwmod structures
@@ -5336,6 +5338,205 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
+ .master = &omap44xx_usb_host_hs_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+ MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
+ .name = "usb_host_hs",
+ .sysc = &omap44xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
+ &omap44xx_usb_host_hs__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
+ {
+ .name = "uhh",
+ .pa_start = 0x4a064000,
+ .pa_end = 0x4a0647ff,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "ohci",
+ .pa_start = 0x4a064800,
+ .pa_end = 0x4a064bff,
+ },
+ {
+ .name = "ehci",
+ .pa_start = 0x4a064c00,
+ .pa_end = 0x4a064fff,
+ },
+ {}
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
+ { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
+ { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_usb_host_hs_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_usb_host_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
+ &omap44xx_l4_cfg__usb_host_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
+ .name = "usb_host_hs",
+ .class = &omap44xx_usb_host_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .main_clk = "usb_host_hs_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .mpu_irqs = omap44xx_usb_host_hs_irqs,
+ .slaves = omap44xx_usb_host_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
+ .masters = omap44xx_usb_host_hs_masters,
+ .masters_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_masters),
+/*
+ * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+ * id: i660
+ *
+ * Description:
+ * In the following configuration :
+ * - USBHOST module is set to smart-idle mode
+ * - PRCM asserts idle_req to the USBHOST module ( This typically happens
+ * when the system is going to a low power mode : all ports have been
+ * suspended, the master part of the USBHOST module has entered the
+ * standby state, and SW has cut the functional clocks.)
+ * - an USBHOST interrupt occurs before the module is able to answer
+ * idle_ack, typically a remote wakeup IRQ.
+ * Then the USB HOST module will enter a deadlock situation where it is no
+ * more accessible nor functional.
+ *
+ * Workaround:
+ * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+ */
+
+/* Errata: USB host EHCI may stall when entering smart-standby mode
+ * Id: i571
+ *
+ * Description:
+ * When the USBHOST module is set to smart-standby mode, and when it is
+ * ready to enter the standby state (i.e. all ports are suspended and
+ * all attached devices are in suspend mode), then it can wrongly assert
+ * the Mstandby signal too early while there are still some residual OCP
+ * transactions ongoing. If this condition occurs, the internal state
+ * machine may go to an undefined state and the USB link may be stuck
+ * upon the next resume.
+ *
+ * Workaround:
+ * Don't use smart standby; use only force standby,
+ * hence HWMOD_SWSUP_MSTANDBY
+ */
+
+/* During system boot; If the hwmod framework resets the module
+ * the module will have smart idle settings; which can lead to deadlock
+ * (above Errata Id:i660); so, dont reset the module during boot;
+ * Use HWMOD_INIT_NO_RESET.
+ */
+
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+ HWMOD_INIT_NO_RESET,
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
+ .name = "usb_tll_hs",
+ .sysc = &omap44xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
+ { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
+ {
+ .name = "tll",
+ .pa_start = 0x4a062000,
+ .pa_end = 0x4a063fff,
+ .flags = ADDR_TYPE_RT
+ },
+ {}
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_usb_tll_hs_hwmod,
+ .addr = omap44xx_usb_tll_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
+ &omap44xx_l4_cfg__usb_tll_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
+ .name = "usb_tll_hs",
+ .class = &omap44xx_usb_tll_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .main_clk = "usb_tll_hs_ick",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
+ .mpu_irqs = omap44xx_usb_tll_hs_irqs,
+ .slaves = omap44xx_usb_tll_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
+ .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
/* dmm class */
@@ -5475,13 +5676,16 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
&omap44xx_uart3_hwmod,
&omap44xx_uart4_hwmod,
+ /* usb host class */
+ &omap44xx_usb_host_hs_hwmod,
+ &omap44xx_usb_tll_hs_hwmod,
+
/* usb_otg_hs class */
&omap44xx_usb_otg_hs_hwmod,
/* wd_timer class */
&omap44xx_wd_timer2_hwmod,
&omap44xx_wd_timer3_hwmod,
-
NULL,
};
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
