On 2011-09-27 07:40, Deepthy Ravi wrote:
This patchset -adds support for MT9T111 sensor on omap3evm. Currently the sensor driver supports only VGA resolution. -enables MT9T111 sensor in omap2plus_defconfig. This is dependent on the following patchset http://www.spinics.net/lists/linux-media/msg37270.html which adds YUYV input support for OMAP3ISP. And is applied on top of rc1-for-3.2 of gliakhovetski/v4l-dvb.git
Why not use the same base as Lennart? The set is based on http://git.linuxtv.org/pinchartl/media.git/shortlog/refs/heads/omap3isp-omap3isp-next
--- Changes in v2: As per the discussion here, https://lkml.org/lkml/2011/9/20/280 the existing mt9t112 driver is reused for adding support for mt9t111 sensor. Deepthy Ravi (3): [media] v4l: Add support for mt9t111 sensor driver ispccdc: Configure CCDC_SYN_MODE register omap2plus_defconfig: Enable omap3isp and MT9T111 sensor drivers Vaibhav Hiremath (2): omap3evm: Enable regulators for camera interface omap3evm: Add Camera board init/hookup file arch/arm/configs/omap2plus_defconfig | 9 + arch/arm/mach-omap2/Makefile | 5 + arch/arm/mach-omap2/board-omap3evm-camera.c | 185 ++++ arch/arm/mach-omap2/board-omap3evm.c | 26 + drivers/media/video/Kconfig | 7 + drivers/media/video/Makefile | 1 + drivers/media/video/mt9t111_reg.h | 1367 +++++++++++++++++++++++++++ drivers/media/video/mt9t112.c | 320 ++++++- drivers/media/video/omap3isp/ispccdc.c | 11 +- include/media/mt9t111.h | 45 + 10 files changed, 1937 insertions(+), 39 deletions(-) create mode 100644 arch/arm/mach-omap2/board-omap3evm-camera.c create mode 100644 drivers/media/video/mt9t111_reg.h create mode 100644 include/media/mt9t111.h
-- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
