Hi Grant, Tony, This series is a rework of several series: [RFC PATCH 00/10] OMAP: Add DT support for early init OMAP4 devices http://www.spinics.net/lists/linux-omap/msg55977.html [PATCH 00/13] OMAP4: Add DT support for i2c and twl6030 http://www.spinics.net/lists/linux-omap/msg56524.html [PATCH 0/7] OMAP3: Add basic DT support + i2c + twl http://www.spinics.net/lists/linux-omap/msg56538.html It adds a minimal i2c and twl support to allow the removal of the static i2c init. A couple of basic i2c devices are added for panda, beagle and sdp4430 boards. Some early devices (gpio, spinlock) are added as well to remove any init previously done before the machine_init. It fixes several comments: - Simplify the twl children creation thanks to Arnd proposal - Add the twl-rtc DT support needed by the usage of regular of_platform_populate method to create twl children. - Fix hwspinlock driver that was not building correctly as module - Allow lecacy device initialization mechanism to work in case no dtb is passed by the bootloader. Patches are based on for_3.2/3_omap_devicetree and are available here: git://gitorious.org/omap-pm/linux.git for_3.2/4_omap_dt_i2c_twl Tested on PandaBoard, sdp4430 and BeagleBoard-xM with and without CONFIG_OF. Comments are welcome. Regards, Benoit Benoit Cousson (13): hwspinlock: OMAP4: Add spinlock support in DT gpio/omap: Adapt GPIO driver to DT arm/dts: OMAP4: Add gpio nodes irq: Add stub for none DT build in irqdomain.h i2c: OMAP: Add DT support for i2c controller mfd: twl-core: Add initial DT support for twl4030/twl6030 rtc: rtc-twl: Add DT support for RTC inside twl4030/twl6030 arm/dts: OMAP4: Add i2c controller nodes arm/dts: OMAP3: Add i2c controller nodes arm/dts: omap4-panda: Add twl6030 and i2c EEPROM arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devices arm/dts: omap3-beagle: Add twl4030 and i2c EEPROM OMAP2+: board-generic: Remove i2c static init .../devicetree/bindings/gpio/gpio-omap.txt | 33 ++++++ .../bindings/hwspinlock/omap-spinlock.txt | 5 + Documentation/devicetree/bindings/i2c/omap-i2c.txt | 30 ++++++ .../devicetree/bindings/mfd/twl-familly.txt | 47 +++++++++ Documentation/devicetree/bindings/rtc/twl-rtc.txt | 12 ++ arch/arm/boot/dts/omap3-beagle.dts | 38 +++++++ arch/arm/boot/dts/omap3.dtsi | 27 +++++ arch/arm/boot/dts/omap4-panda.dts | 44 ++++++++ arch/arm/boot/dts/omap4-sdp.dts | 62 +++++++++++ arch/arm/boot/dts/omap4.dtsi | 106 +++++++++++++++++++ arch/arm/mach-omap2/board-generic.c | 41 +------- arch/arm/mach-omap2/gpio.c | 8 +- arch/arm/mach-omap2/hwspinlock.c | 5 + drivers/gpio/gpio-omap.c | 108 ++++++++++++++++++-- drivers/hwspinlock/omap_hwspinlock.c | 11 ++ drivers/i2c/busses/i2c-omap.c | 26 ++++- drivers/mfd/twl-core.c | 53 +++++++++- drivers/rtc/rtc-twl.c | 10 ++- include/linux/irqdomain.h | 2 + 19 files changed, 609 insertions(+), 59 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-omap.txt create mode 100644 Documentation/devicetree/bindings/hwspinlock/omap-spinlock.txt create mode 100644 Documentation/devicetree/bindings/i2c/omap-i2c.txt create mode 100644 Documentation/devicetree/bindings/mfd/twl-familly.txt create mode 100644 Documentation/devicetree/bindings/rtc/twl-rtc.txt -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
