Currently, there is a lot of redundant code is between DPI and VENC panels, this
can be made common by moving out field/interlace specific code to a separate
function called omapvid_handle_interlace_display(). There is no functional
change made.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
drivers/media/video/omap/omap_vout.c | 172 ++++++++++++++++------------------
1 files changed, 82 insertions(+), 90 deletions(-)
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 16ebff6..01c24a4 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -524,10 +524,50 @@ static int omapvid_apply_changes(struct omap_vout_device *vout)
return 0;
}
+static int omapvid_handle_interlace_display(struct omap_vout_device *vout,
+ unsigned int irqstatus, struct timeval timevalue)
+{
+ u32 fid;
+
+ if (vout->first_int) {
+ vout->first_int = 0;
+ goto err;
+ }
+
+ if (irqstatus & DISPC_IRQ_EVSYNC_ODD)
+ fid = 1;
+ else if (irqstatus & DISPC_IRQ_EVSYNC_EVEN)
+ fid = 0;
+ else
+ goto err;
+
+ vout->field_id ^= 1;
+ if (fid != vout->field_id) {
+ if (fid == 0)
+ vout->field_id = fid;
+ } else if (0 == fid) {
+ if (vout->cur_frm == vout->next_frm)
+ goto err;
+
+ vout->cur_frm->ts = timevalue;
+ vout->cur_frm->state = VIDEOBUF_DONE;
+ wake_up_interruptible(&vout->cur_frm->done);
+ vout->cur_frm = vout->next_frm;
+ } else {
+ if (list_empty(&vout->dma_queue) ||
+ (vout->cur_frm != vout->next_frm))
+ goto err;
+ }
+
+ return vout->field_id;
+err:
+ return 0;
+}
+
static void omap_vout_isr(void *arg, unsigned int irqstatus)
{
- int ret;
- u32 addr, fid;
+ int ret, fid;
+ u32 addr;
struct omap_overlay *ovl;
struct timeval timevalue;
struct omapvideo_info *ovid;
@@ -548,107 +588,59 @@ static void omap_vout_isr(void *arg, unsigned int irqstatus)
spin_lock(&vout->vbq_lock);
do_gettimeofday(&timevalue);
- if (cur_display->type != OMAP_DISPLAY_TYPE_VENC) {
- switch (cur_display->type) {
- case OMAP_DISPLAY_TYPE_DPI:
- if (!(irqstatus & (DISPC_IRQ_VSYNC | DISPC_IRQ_VSYNC2)))
- goto vout_isr_err;
- break;
- case OMAP_DISPLAY_TYPE_HDMI:
- if (!(irqstatus & DISPC_IRQ_EVSYNC_EVEN))
- goto vout_isr_err;
- break;
- default:
+ switch (cur_display->type) {
+ case OMAP_DISPLAY_TYPE_DPI:
+ if (!(irqstatus & (DISPC_IRQ_VSYNC | DISPC_IRQ_VSYNC2)))
goto vout_isr_err;
- }
- if (!vout->first_int && (vout->cur_frm != vout->next_frm)) {
- vout->cur_frm->ts = timevalue;
- vout->cur_frm->state = VIDEOBUF_DONE;
- wake_up_interruptible(&vout->cur_frm->done);
- vout->cur_frm = vout->next_frm;
- }
- vout->first_int = 0;
- if (list_empty(&vout->dma_queue))
+ break;
+ case OMAP_DISPLAY_TYPE_VENC:
+ fid = omapvid_handle_interlace_display(vout, irqstatus,
+ timevalue);
+ if (!fid)
goto vout_isr_err;
+ break;
+ case OMAP_DISPLAY_TYPE_HDMI:
+ if (!(irqstatus & DISPC_IRQ_EVSYNC_EVEN))
+ goto vout_isr_err;
+ break;
+ default:
+ goto vout_isr_err;
+ }
- vout->next_frm = list_entry(vout->dma_queue.next,
- struct videobuf_buffer, queue);
- list_del(&vout->next_frm->queue);
-
- vout->next_frm->state = VIDEOBUF_ACTIVE;
-
- addr = (unsigned long) vout->queued_buf_addr[vout->next_frm->i]
- + vout->cropped_offset;
+ if (!vout->first_int && (vout->cur_frm != vout->next_frm)) {
+ vout->cur_frm->ts = timevalue;
+ vout->cur_frm->state = VIDEOBUF_DONE;
+ wake_up_interruptible(&vout->cur_frm->done);
+ vout->cur_frm = vout->next_frm;
+ }
- /* First save the configuration in ovelray structure */
- ret = omapvid_init(vout, addr);
- if (ret)
- printk(KERN_ERR VOUT_NAME
- "failed to set overlay info\n");
- /* Enable the pipeline and set the Go bit */
- ret = omapvid_apply_changes(vout);
- if (ret)
- printk(KERN_ERR VOUT_NAME "failed to change mode\n");
- } else {
+ vout->first_int = 0;
+ if (list_empty(&vout->dma_queue))
+ goto vout_isr_err;
- if (vout->first_int) {
- vout->first_int = 0;
- goto vout_isr_err;
- }
- if (irqstatus & DISPC_IRQ_EVSYNC_ODD)
- fid = 1;
- else if (irqstatus & DISPC_IRQ_EVSYNC_EVEN)
- fid = 0;
- else
- goto vout_isr_err;
+ vout->next_frm = list_entry(vout->dma_queue.next,
+ struct videobuf_buffer, queue);
+ list_del(&vout->next_frm->queue);
- vout->field_id ^= 1;
- if (fid != vout->field_id) {
- if (0 == fid)
- vout->field_id = fid;
+ vout->next_frm->state = VIDEOBUF_ACTIVE;
- goto vout_isr_err;
- }
- if (0 == fid) {
- if (vout->cur_frm == vout->next_frm)
- goto vout_isr_err;
-
- vout->cur_frm->ts = timevalue;
- vout->cur_frm->state = VIDEOBUF_DONE;
- wake_up_interruptible(&vout->cur_frm->done);
- vout->cur_frm = vout->next_frm;
- } else if (1 == fid) {
- if (list_empty(&vout->dma_queue) ||
- (vout->cur_frm != vout->next_frm))
- goto vout_isr_err;
-
- vout->next_frm = list_entry(vout->dma_queue.next,
- struct videobuf_buffer, queue);
- list_del(&vout->next_frm->queue);
-
- vout->next_frm->state = VIDEOBUF_ACTIVE;
- addr = (unsigned long)
- vout->queued_buf_addr[vout->next_frm->i] +
- vout->cropped_offset;
- /* First save the configuration in ovelray structure */
- ret = omapvid_init(vout, addr);
- if (ret)
- printk(KERN_ERR VOUT_NAME
- "failed to set overlay info\n");
- /* Enable the pipeline and set the Go bit */
- ret = omapvid_apply_changes(vout);
- if (ret)
- printk(KERN_ERR VOUT_NAME
- "failed to change mode\n");
- }
+ addr = (unsigned long) vout->queued_buf_addr[vout->next_frm->i]
+ + vout->cropped_offset;
- }
+ /* First save the configuration in ovelray structure */
+ ret = omapvid_init(vout, addr);
+ if (ret)
+ printk(KERN_ERR VOUT_NAME
+ "failed to set overlay info\n");
+ /* Enable the pipeline and set the Go bit */
+ ret = omapvid_apply_changes(vout);
+ if (ret)
+ printk(KERN_ERR VOUT_NAME "failed to change mode\n");
vout_isr_err:
spin_unlock(&vout->vbq_lock);
}
-
/* Video buffer call backs */
/*
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
