hi Kevin,
On Fri, Sep 23, 2011 at 3:05 PM, Hilman, Kevin wrote:
>
> Abhilash K V <abhilash.kv@xxxxxx> writes:
>
>> In case of AM3517 & AM3505, SmartReflex is not applicable so
>> we must not enable it.
>
> This part is fine, but...
>
>> So omap3_twl_init() is now not called when the processor does not
>> support SR.
>
> ...I don't think this is right. DVFS using the PMIC is still doable
> without SR.
>
> Are you assuming that no DVFS is done on these devices?
[Abhilash K V] yes, I just verified (in sprugr0b), that DVFS is not supported on am35xx
DPS however is supported, though I'm unsure of how or whether it needs
software control.
-Abhilash
>
> Kevin
>
>
>> Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx>
>> Signed-off-by: Abhilash K V <abhilash.kv@xxxxxx>
>> ---
>> arch/arm/mach-omap2/id.c | 2 +-
>> arch/arm/mach-omap2/pm.c | 3 ++-
>> arch/arm/plat-omap/include/plat/cpu.h | 2 ++
>> 3 files changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
>> index d27daf9..b7e3082 100644
>> --- a/arch/arm/mach-omap2/id.c
>> +++ b/arch/arm/mach-omap2/id.c
>> @@ -188,7 +188,7 @@ static void __init omap3_check_features(void)
>> if (cpu_is_omap3630())
>> omap_features |= OMAP3_HAS_192MHZ_CLK;
>> if (!cpu_is_omap3505() && !cpu_is_omap3517())
>> - omap_features |= OMAP3_HAS_IO_WAKEUP;
>> + omap_features |= (OMAP3_HAS_IO_WAKEUP | OMAP3_HAS_SR);
>>
>> omap_features |= OMAP3_HAS_SDRC;
>>
>> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
>> index d34fc52..da71abc 100644
>> --- a/arch/arm/mach-omap2/pm.c
>> +++ b/arch/arm/mach-omap2/pm.c
>> @@ -252,7 +252,8 @@ postcore_initcall(omap2_common_pm_init);
>> static int __init omap2_common_pm_late_init(void)
>> {
>> /* Init the OMAP TWL parameters */
>> - omap3_twl_init();
>> + if (omap3_has_sr())
>> + omap3_twl_init();
>> omap4_twl_init();
>>
>> /* Init the voltage layer */
>> diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
>> index 2f90269..cc6fcd3 100644
>> --- a/arch/arm/plat-omap/include/plat/cpu.h
>> +++ b/arch/arm/plat-omap/include/plat/cpu.h
>> @@ -413,6 +413,7 @@ extern u32 omap_features;
>> #define OMAP4_HAS_MPU_1GHZ BIT(8)
>> #define OMAP4_HAS_MPU_1_2GHZ BIT(9)
>> #define OMAP4_HAS_MPU_1_5GHZ BIT(10)
>> +#define OMAP3_HAS_SR BIT(11)
>>
>>
>> #define OMAP3_HAS_FEATURE(feat,flag) \
>> @@ -429,6 +430,7 @@ OMAP3_HAS_FEATURE(isp, ISP)
>> OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
>> OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
>> OMAP3_HAS_FEATURE(sdrc, SDRC)
>> +OMAP3_HAS_FEATURE(sr, SR)
>>
>> /*
>> * Runtime detection of OMAP4 features
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
