From: Mathieu J. Poirier <mathieu.poirier@xxxxxxxxxx>
Add hwspinlock driver for U8500's Hsem hardware.
At this point only HSem's protocol 1 is used (i.e. no interrupts).
Signed-off-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
[ohad@xxxxxxxxxx: adopt recent hwspin_lock_{un}register API changes]
[ohad@xxxxxxxxxx: set the owner member of the driver]
[ohad@xxxxxxxxxx: mark ->remove() function as __devexit]
[ohad@xxxxxxxxxx: write commit log]
[ohad@xxxxxxxxxx: small cleanups]
Signed-off-by: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
---
drivers/hwspinlock/Kconfig | 11 ++
drivers/hwspinlock/Makefile | 2 +
drivers/hwspinlock/u8500_hsem.c | 198 +++++++++++++++++++++++++++++++++++++++
3 files changed, 211 insertions(+), 0 deletions(-)
create mode 100644 drivers/hwspinlock/u8500_hsem.c
diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index c8e7bda..c7c3128 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -18,4 +18,15 @@ config HWSPINLOCK_OMAP
If unsure, say N.
+config HSEM_U8500
+ tristate "STE Hardware Semaphore functionality"
+ depends on ARCH_U8500
+ select HWSPINLOCK
+ help
+ Say y here to support the STE Hardware Semaphore functionality, which
+ provides a synchronisation mechanism for the various processor on the
+ SoC.
+
+ If unsure, say N.
+
endmenu
diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile
index 5729a3f..d1aeea7 100644
--- a/drivers/hwspinlock/Makefile
+++ b/drivers/hwspinlock/Makefile
@@ -4,3 +4,4 @@
obj-$(CONFIG_HWSPINLOCK) += hwspinlock_core.o
obj-$(CONFIG_HWSPINLOCK_OMAP) += omap_hwspinlock.o
+obj-$(CONFIG_HSEM_U8500) += u8500_hsem.o
diff --git a/drivers/hwspinlock/u8500_hsem.c b/drivers/hwspinlock/u8500_hsem.c
new file mode 100644
index 0000000..f749fcf
--- /dev/null
+++ b/drivers/hwspinlock/u8500_hsem.c
@@ -0,0 +1,198 @@
+/*
+ * u8500 HWSEM driver
+ *
+ * Copyright (C) 2010-2011 ST-Ericsson
+ *
+ * Implements u8500 semaphore handling for protocol 1, no interrupts.
+ *
+ * Author: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
+ * Heavily borrowed from the work of :
+ * Simon Que <sque@xxxxxx>
+ * Hari Kanigeri <h-kanigeri2@xxxxxx>
+ * Ohad Ben-Cohen <ohad@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/hwspinlock.h>
+#include <linux/platform_device.h>
+
+#include "hwspinlock_internal.h"
+
+/*
+ * Implementation of STE's HSem protocol 1 without interrutps.
+ * The only masterID we allow is '0x01' to force people to use
+ * HSems for synchronisation between processors rather than processes
+ * on the ARM core.
+ */
+
+#define U8500_MAX_SEMAPHORE 32 /* a total of 32 semaphore */
+#define RESET_SEMAPHORE (0) /* free */
+
+/*
+ * CPU ID for master running u8500 kernel.
+ * Hswpinlocks should only be used to synchonise operations
+ * between the Cortex A9 core and the other CPUs. Hence
+ * forcing the masterID to a preset value.
+ */
+#define HSEM_MASTER_ID 0x01
+
+#define HSEM_REGISTER_OFFSET 0x08
+
+#define HSEM_CTRL_REG 0x00
+#define HSEM_ICRALL 0x90
+#define HSEM_PROTOCOL_1 0x01
+
+static int u8500_hsem_trylock(struct hwspinlock *lock)
+{
+ void __iomem *lock_addr = lock->priv;
+
+ writel(HSEM_MASTER_ID, lock_addr);
+
+ /* get only first 4 bit and compare to masterID.
+ * if equal, we have the semaphore, otherwise
+ * someone else has it.
+ */
+ return (HSEM_MASTER_ID == (0x0F & readl(lock_addr)));
+}
+
+static void u8500_hsem_unlock(struct hwspinlock *lock)
+{
+ void __iomem *lock_addr = lock->priv;
+
+ /* release the lock by writing 0 to it */
+ writel(RESET_SEMAPHORE, lock_addr);
+}
+
+/*
+ * u8500: what value is recommended here ?
+ */
+static void u8500_hsem_relax(struct hwspinlock *lock)
+{
+ ndelay(50);
+}
+
+static const struct hwspinlock_ops u8500_hwspinlock_ops = {
+ .trylock = u8500_hsem_trylock,
+ .unlock = u8500_hsem_unlock,
+ .relax = u8500_hsem_relax,
+};
+
+static int __devinit u8500_hsem_probe(struct platform_device *pdev)
+{
+ struct hwspinlock_pdata *pdata = pdev->dev.platform_data;
+ struct hwspinlock_device *bank;
+ struct hwspinlock *hwlock;
+ struct resource *res;
+ void __iomem *io_base;
+ int i, ret, num_locks = U8500_MAX_SEMAPHORE;
+ ulong val;
+
+ if (!pdata)
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ io_base = ioremap(res->start, resource_size(res));
+ if (!io_base) {
+ ret = -ENOMEM;
+ goto free_state;
+ }
+
+ /* make sure protocol 1 is selected */
+ val = readl(io_base + HSEM_CTRL_REG);
+ writel((val & ~HSEM_PROTOCOL_1), io_base + HSEM_CTRL_REG);
+
+ /* clear all interrupts */
+ writel(0xFFFF, io_base + HSEM_ICRALL);
+
+ bank = kzalloc(sizeof(*bank) + num_locks * sizeof(*hwlock), GFP_KERNEL);
+ if (!bank) {
+ ret = -ENOMEM;
+ goto iounmap_base;
+ }
+
+ platform_set_drvdata(pdev, bank);
+
+ for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
+ hwlock->priv = io_base + HSEM_REGISTER_OFFSET + sizeof(u32) * i;
+
+ /* no pm needed for HSem but required to comply with hwspilock core */
+ pm_runtime_enable(&pdev->dev);
+
+ ret = hwspin_lock_register(bank, &pdev->dev, &u8500_hwspinlock_ops,
+ pdata->base_id, num_locks);
+ if (ret)
+ goto reg_fail;
+
+ return 0;
+
+reg_fail:
+ pm_runtime_disable(&pdev->dev);
+ kfree(bank);
+iounmap_base:
+ iounmap(io_base);
+ return ret;
+}
+
+static int __devexit u8500_hsem_remove(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank = platform_get_drvdata(pdev);
+ void __iomem *io_base = bank->lock[0].priv - HSEM_REGISTER_OFFSET;
+ int ret;
+
+ /* clear all interrupts */
+ writel(0xFFFF, io_base + HSEM_ICRALL);
+
+ ret = hwspin_lock_unregister(bank);
+ if (ret) {
+ dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
+ return ret;
+ }
+
+ pm_runtime_disable(&pdev->dev);
+ iounmap(io_base);
+ kfree(bank);
+
+ return 0;
+}
+
+static struct platform_driver u8500_hsem_driver = {
+ .probe = u8500_hsem_probe,
+ .remove = __devexit_p(u8500_hsem_remove),
+ .driver = {
+ .name = "u8500_hsem",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init u8500_hsem_init(void)
+{
+ return platform_driver_register(&u8500_hsem_driver);
+}
+/* board init code might need to reserve hwspinlocks for predefined purposes */
+postcore_initcall(u8500_hsem_init);
+
+static void __exit u8500_hsem_exit(void)
+{
+ platform_driver_unregister(&u8500_hsem_driver);
+}
+module_exit(u8500_hsem_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Hardware Spinlock driver for u8500");
+MODULE_AUTHOR("Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>");
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
