drivers/video/omap/ contains some lcd drivers which are not used by any
board. They can be removed.
Cc: Arun C <arunedarath@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
Acked-by: Steve Sakoman <steve@xxxxxxxxxxx>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
drivers/video/omap/Kconfig | 29 -----
drivers/video/omap/Makefile | 4 -
drivers/video/omap/lcd_ldp.c | 201 ----------------------------------
drivers/video/omap/lcd_omap3beagle.c | 130 ----------------------
drivers/video/omap/lcd_omap3evm.c | 193 --------------------------------
drivers/video/omap/lcd_overo.c | 180 ------------------------------
6 files changed, 0 insertions(+), 737 deletions(-)
delete mode 100644 drivers/video/omap/lcd_ldp.c
delete mode 100644 drivers/video/omap/lcd_omap3beagle.c
delete mode 100644 drivers/video/omap/lcd_omap3evm.c
delete mode 100644 drivers/video/omap/lcd_overo.c
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 196fa2e..84ff232 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -9,35 +9,6 @@ config FB_OMAP
help
Frame buffer driver for OMAP based boards.
-config FB_OMAP_LCD_VGA
- bool "Use LCD in VGA mode"
- depends on MACH_OMAP_3430SDP || MACH_OMAP_LDP
- help
- Set LCD resolution as VGA (640 X 480).
- Default resolution without this option is QVGA(320 X 240).
- Please take a look at drivers/video/omap/lcd_ldp.c file
- for lcd driver code.
-choice
- depends on FB_OMAP && MACH_OVERO
- prompt "Screen resolution"
- default FB_OMAP_079M3R
- help
- Selected desired screen resolution
-
-config FB_OMAP_031M3R
- boolean "640 x 480 @ 60 Hz Reduced blanking"
-
-config FB_OMAP_048M3R
- boolean "800 x 600 @ 60 Hz Reduced blanking"
-
-config FB_OMAP_079M3R
- boolean "1024 x 768 @ 60 Hz Reduced blanking"
-
-config FB_OMAP_092M9R
- boolean "1280 x 720 @ 60 Hz Reduced blanking"
-
-endchoice
-
config FB_OMAP_LCDC_EXTERNAL
bool "External LCD controller support"
depends on FB_OMAP
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile
index 25db556..37c03c2 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/omap/Makefile
@@ -29,11 +29,7 @@ objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o
-objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o
-objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o
-objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o
objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
-objs-y$(CONFIG_MACH_OVERO) += lcd_overo.o
objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
omapfb-objs := $(objs-yy)
diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
deleted file mode 100644
index 0f5952c..0000000
--- a/drivers/video/omap/lcd_ldp.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * LCD panel support for the TI LDP board
- *
- * Copyright (C) 2007 WindRiver
- * Author: Stanley Miao <stanley.miao@xxxxxxxxxxxxx>
- *
- * Derived from drivers/video/omap/lcd-2430sdp.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/i2c/twl.h>
-
-#include <mach/gpio.h>
-#include <plat/mux.h>
-#include <asm/mach-types.h>
-
-#include "omapfb.h"
-
-#define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES)
-#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES)
-
-#define LCD_PANEL_RESET_GPIO 55
-#define LCD_PANEL_QVGA_GPIO 56
-
-#ifdef CONFIG_FB_OMAP_LCD_VGA
-#define LCD_XRES 480
-#define LCD_YRES 640
-#define LCD_PIXCLOCK_MAX 41700
-#else
-#define LCD_XRES 240
-#define LCD_YRES 320
-#define LCD_PIXCLOCK_MAX 185186
-#endif
-
-#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER
-#define ENABLE_VAUX2_DEDICATED 0x09
-#define ENABLE_VAUX2_DEV_GRP 0x20
-#define ENABLE_VAUX3_DEDICATED 0x03
-#define ENABLE_VAUX3_DEV_GRP 0x20
-
-#define ENABLE_VPLL2_DEDICATED 0x05
-#define ENABLE_VPLL2_DEV_GRP 0xE0
-#define TWL4030_VPLL2_DEV_GRP 0x33
-#define TWL4030_VPLL2_DEDICATED 0x36
-
-#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v)
-
-
-static int ldp_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- gpio_request(LCD_PANEL_RESET_GPIO, "lcd reset");
- gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga");
- gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd panel");
- gpio_request(LCD_PANEL_BACKLIGHT_GPIO, "lcd backlight");
-
- gpio_direction_output(LCD_PANEL_QVGA_GPIO, 0);
- gpio_direction_output(LCD_PANEL_RESET_GPIO, 0);
- gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
- gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
-
-#ifdef CONFIG_FB_OMAP_LCD_VGA
- gpio_set_value(LCD_PANEL_QVGA_GPIO, 0);
-#else
- gpio_set_value(LCD_PANEL_QVGA_GPIO, 1);
-#endif
- gpio_set_value(LCD_PANEL_RESET_GPIO, 1);
-
- return 0;
-}
-
-static void ldp_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(LCD_PANEL_BACKLIGHT_GPIO);
- gpio_free(LCD_PANEL_ENABLE_GPIO);
- gpio_free(LCD_PANEL_QVGA_GPIO);
- gpio_free(LCD_PANEL_RESET_GPIO);
-}
-
-static int ldp_panel_enable(struct lcd_panel *panel)
-{
- if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
- TWL4030_VPLL2_DEDICATED))
- return -EIO;
- if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
- TWL4030_VPLL2_DEV_GRP))
- return -EIO;
-
- gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1);
- gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 1);
-
- if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEDICATED,
- TWL4030_VAUX3_DEDICATED))
- return -EIO;
- if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEV_GRP,
- TWL4030_VAUX3_DEV_GRP))
- return -EIO;
-
- return 0;
-}
-
-static void ldp_panel_disable(struct lcd_panel *panel)
-{
- gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
- gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
-
- t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
- t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
- msleep(4);
-}
-
-static unsigned long ldp_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel ldp_panel = {
- .name = "ldp",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC,
-
- .bpp = 16,
- .data_lines = 18,
- .x_res = LCD_XRES,
- .y_res = LCD_YRES,
- .hsw = 3, /* hsync_len (4) - 1 */
- .hfp = 3, /* right_margin (4) - 1 */
- .hbp = 39, /* left_margin (40) - 1 */
- .vsw = 1, /* vsync_len (2) - 1 */
- .vfp = 2, /* lower_margin */
- .vbp = 7, /* upper_margin (8) - 1 */
-
- .pixel_clock = LCD_PIXCLOCK_MAX,
-
- .init = ldp_panel_init,
- .cleanup = ldp_panel_cleanup,
- .enable = ldp_panel_enable,
- .disable = ldp_panel_disable,
- .get_caps = ldp_panel_get_caps,
-};
-
-static int ldp_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&ldp_panel);
- return 0;
-}
-
-static int ldp_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int ldp_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return 0;
-}
-
-static int ldp_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver ldp_panel_driver = {
- .probe = ldp_panel_probe,
- .remove = ldp_panel_remove,
- .suspend = ldp_panel_suspend,
- .resume = ldp_panel_resume,
- .driver = {
- .name = "ldp_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init ldp_panel_drv_init(void)
-{
- return platform_driver_register(&ldp_panel_driver);
-}
-
-static void __exit ldp_panel_drv_exit(void)
-{
- platform_driver_unregister(&ldp_panel_driver);
-}
-
-module_init(ldp_panel_drv_init);
-module_exit(ldp_panel_drv_exit);
diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c
deleted file mode 100644
index d7c6c3e..0000000
--- a/drivers/video/omap/lcd_omap3beagle.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * LCD panel support for the TI OMAP3 Beagle board
- *
- * Author: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
- *
- * Derived from drivers/video/omap/lcd-omap3evm.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-
-#include <asm/mach-types.h>
-
-#include "omapfb.h"
-
-#define LCD_PANEL_ENABLE_GPIO 170
-
-static int omap3beagle_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable");
- return 0;
-}
-
-static void omap3beagle_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(LCD_PANEL_ENABLE_GPIO);
-}
-
-static int omap3beagle_panel_enable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1);
- return 0;
-}
-
-static void omap3beagle_panel_disable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0);
-}
-
-static unsigned long omap3beagle_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel omap3beagle_panel = {
- .name = "omap3beagle",
- .config = OMAP_LCDC_PANEL_TFT,
-
- .bpp = 16,
- .data_lines = 24,
- .x_res = 1024,
- .y_res = 768,
- .hsw = 3, /* hsync_len (4) - 1 */
- .hfp = 3, /* right_margin (4) - 1 */
- .hbp = 39, /* left_margin (40) - 1 */
- .vsw = 1, /* vsync_len (2) - 1 */
- .vfp = 2, /* lower_margin */
- .vbp = 7, /* upper_margin (8) - 1 */
-
- .pixel_clock = 64000,
-
- .init = omap3beagle_panel_init,
- .cleanup = omap3beagle_panel_cleanup,
- .enable = omap3beagle_panel_enable,
- .disable = omap3beagle_panel_disable,
- .get_caps = omap3beagle_panel_get_caps,
-};
-
-static int omap3beagle_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&omap3beagle_panel);
- return 0;
-}
-
-static int omap3beagle_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int omap3beagle_panel_suspend(struct platform_device *pdev,
- pm_message_t mesg)
-{
- return 0;
-}
-
-static int omap3beagle_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver omap3beagle_panel_driver = {
- .probe = omap3beagle_panel_probe,
- .remove = omap3beagle_panel_remove,
- .suspend = omap3beagle_panel_suspend,
- .resume = omap3beagle_panel_resume,
- .driver = {
- .name = "omap3beagle_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init omap3beagle_panel_drv_init(void)
-{
- return platform_driver_register(&omap3beagle_panel_driver);
-}
-
-static void __exit omap3beagle_panel_drv_exit(void)
-{
- platform_driver_unregister(&omap3beagle_panel_driver);
-}
-
-module_init(omap3beagle_panel_drv_init);
-module_exit(omap3beagle_panel_drv_exit);
diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c
deleted file mode 100644
index 06840da..0000000
--- a/drivers/video/omap/lcd_omap3evm.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * LCD panel support for the TI OMAP3 EVM board
- *
- * Author: Steve Sakoman <steve@xxxxxxxxxxx>
- *
- * Derived from drivers/video/omap/lcd-apollon.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-
-#include <plat/mux.h>
-#include <asm/mach-types.h>
-
-#include "omapfb.h"
-
-#define LCD_PANEL_ENABLE_GPIO 153
-#define LCD_PANEL_LR 2
-#define LCD_PANEL_UD 3
-#define LCD_PANEL_INI 152
-#define LCD_PANEL_QVGA 154
-#define LCD_PANEL_RESB 155
-
-#define ENABLE_VDAC_DEDICATED 0x03
-#define ENABLE_VDAC_DEV_GRP 0x20
-#define ENABLE_VPLL2_DEDICATED 0x05
-#define ENABLE_VPLL2_DEV_GRP 0xE0
-
-#define TWL_LED_LEDEN 0x00
-#define TWL_PWMA_PWMAON 0x00
-#define TWL_PWMA_PWMAOFF 0x01
-
-static unsigned int bklight_level;
-
-static int omap3evm_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- gpio_request(LCD_PANEL_LR, "LCD lr");
- gpio_request(LCD_PANEL_UD, "LCD ud");
- gpio_request(LCD_PANEL_INI, "LCD ini");
- gpio_request(LCD_PANEL_RESB, "LCD resb");
- gpio_request(LCD_PANEL_QVGA, "LCD qvga");
-
- gpio_direction_output(LCD_PANEL_RESB, 1);
- gpio_direction_output(LCD_PANEL_INI, 1);
- gpio_direction_output(LCD_PANEL_QVGA, 0);
- gpio_direction_output(LCD_PANEL_LR, 1);
- gpio_direction_output(LCD_PANEL_UD, 1);
-
- twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
- twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
- twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
- bklight_level = 100;
-
- return 0;
-}
-
-static void omap3evm_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(LCD_PANEL_QVGA);
- gpio_free(LCD_PANEL_RESB);
- gpio_free(LCD_PANEL_INI);
- gpio_free(LCD_PANEL_UD);
- gpio_free(LCD_PANEL_LR);
-}
-
-static int omap3evm_panel_enable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0);
- return 0;
-}
-
-static void omap3evm_panel_disable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1);
-}
-
-static unsigned long omap3evm_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-static int omap3evm_bklight_setlevel(struct lcd_panel *panel,
- unsigned int level)
-{
- u8 c;
- if ((level >= 0) && (level <= 100)) {
- c = (125 * (100 - level)) / 100 + 2;
- twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
- bklight_level = level;
- }
- return 0;
-}
-
-static unsigned int omap3evm_bklight_getlevel(struct lcd_panel *panel)
-{
- return bklight_level;
-}
-
-static unsigned int omap3evm_bklight_getmaxlevel(struct lcd_panel *panel)
-{
- return 100;
-}
-
-struct lcd_panel omap3evm_panel = {
- .name = "omap3evm",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC,
-
- .bpp = 16,
- .data_lines = 18,
- .x_res = 480,
- .y_res = 640,
- .hsw = 3, /* hsync_len (4) - 1 */
- .hfp = 3, /* right_margin (4) - 1 */
- .hbp = 39, /* left_margin (40) - 1 */
- .vsw = 1, /* vsync_len (2) - 1 */
- .vfp = 2, /* lower_margin */
- .vbp = 7, /* upper_margin (8) - 1 */
-
- .pixel_clock = 26000,
-
- .init = omap3evm_panel_init,
- .cleanup = omap3evm_panel_cleanup,
- .enable = omap3evm_panel_enable,
- .disable = omap3evm_panel_disable,
- .get_caps = omap3evm_panel_get_caps,
- .set_bklight_level = omap3evm_bklight_setlevel,
- .get_bklight_level = omap3evm_bklight_getlevel,
- .get_bklight_max = omap3evm_bklight_getmaxlevel,
-};
-
-static int omap3evm_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&omap3evm_panel);
- return 0;
-}
-
-static int omap3evm_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int omap3evm_panel_suspend(struct platform_device *pdev,
- pm_message_t mesg)
-{
- return 0;
-}
-
-static int omap3evm_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver omap3evm_panel_driver = {
- .probe = omap3evm_panel_probe,
- .remove = omap3evm_panel_remove,
- .suspend = omap3evm_panel_suspend,
- .resume = omap3evm_panel_resume,
- .driver = {
- .name = "omap3evm_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init omap3evm_panel_drv_init(void)
-{
- return platform_driver_register(&omap3evm_panel_driver);
-}
-
-static void __exit omap3evm_panel_drv_exit(void)
-{
- platform_driver_unregister(&omap3evm_panel_driver);
-}
-
-module_init(omap3evm_panel_drv_init);
-module_exit(omap3evm_panel_drv_exit);
diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
deleted file mode 100644
index 564933f..0000000
--- a/drivers/video/omap/lcd_overo.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * LCD panel support for the Gumstix Overo
- *
- * Author: Steve Sakoman <steve@xxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-
-#include <mach/gpio.h>
-#include <plat/mux.h>
-#include <asm/mach-types.h>
-
-#include "omapfb.h"
-
-#define LCD_ENABLE 144
-
-static int overo_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- if ((gpio_request(LCD_ENABLE, "LCD_ENABLE") == 0) &&
- (gpio_direction_output(LCD_ENABLE, 1) == 0))
- gpio_export(LCD_ENABLE, 0);
- else
- printk(KERN_ERR "could not obtain gpio for LCD_ENABLE\n");
-
- return 0;
-}
-
-static void overo_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(LCD_ENABLE);
-}
-
-static int overo_panel_enable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_ENABLE, 1);
- return 0;
-}
-
-static void overo_panel_disable(struct lcd_panel *panel)
-{
- gpio_set_value(LCD_ENABLE, 0);
-}
-
-static unsigned long overo_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel overo_panel = {
- .name = "overo",
- .config = OMAP_LCDC_PANEL_TFT,
- .bpp = 16,
- .data_lines = 24,
-
-#if defined CONFIG_FB_OMAP_031M3R
-
- /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
- .x_res = 640,
- .y_res = 480,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 4,
- .vbp = 7,
- .pixel_clock = 23500,
-
-#elif defined CONFIG_FB_OMAP_048M3R
-
- /* 800 x 600 @ 60 Hz Reduced blanking VESA CVT 0.48M3-R */
- .x_res = 800,
- .y_res = 600,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 4,
- .vbp = 11,
- .pixel_clock = 35500,
-
-#elif defined CONFIG_FB_OMAP_079M3R
-
- /* 1024 x 768 @ 60 Hz Reduced blanking VESA CVT 0.79M3-R */
- .x_res = 1024,
- .y_res = 768,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 4,
- .vbp = 15,
- .pixel_clock = 56000,
-
-#elif defined CONFIG_FB_OMAP_092M9R
-
- /* 1280 x 720 @ 60 Hz Reduced blanking VESA CVT 0.92M9-R */
- .x_res = 1280,
- .y_res = 720,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 5,
- .vbp = 13,
- .pixel_clock = 64000,
-
-#else
-
- /* use 640 x 480 if no config option */
- /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
- .x_res = 640,
- .y_res = 480,
- .hfp = 48,
- .hsw = 32,
- .hbp = 80,
- .vfp = 3,
- .vsw = 4,
- .vbp = 7,
- .pixel_clock = 23500,
-
-#endif
-
- .init = overo_panel_init,
- .cleanup = overo_panel_cleanup,
- .enable = overo_panel_enable,
- .disable = overo_panel_disable,
- .get_caps = overo_panel_get_caps,
-};
-
-static int overo_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&overo_panel);
- return 0;
-}
-
-static int overo_panel_remove(struct platform_device *pdev)
-{
- /* omapfb does not have unregister_panel */
- return 0;
-}
-
-static struct platform_driver overo_panel_driver = {
- .probe = overo_panel_probe,
- .remove = overo_panel_remove,
- .driver = {
- .name = "overo_lcd",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init overo_panel_drv_init(void)
-{
- return platform_driver_register(&overo_panel_driver);
-}
-
-static void __exit overo_panel_drv_exit(void)
-{
- platform_driver_unregister(&overo_panel_driver);
-}
-
-module_init(overo_panel_drv_init);
-module_exit(overo_panel_drv_exit);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
