OMAP3 Stalker board has definitions for LCD, but uses the generic driver
without any information what kind of LCD it has. The board should use a
particular panel type from panel-generic-dpi driver, not the generic
one.
As I haven't gotten response the signer-off of stalker board about the
issue, this patch removes the LCD support from the board file. This will
allow us to clean up the panel-generic-dpi driver and make it support
only fixed size panels.
CC: Jason Lam <lzg@xxxxxxxxxxxx>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
---
arch/arm/mach-omap2/board-omap3stalker.c | 34 ------------------------------
1 files changed, 0 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8ab99f1..106a2ba 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -108,39 +108,6 @@ static void __init omap3_stalker_display_init(void)
return;
}
-static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
- gpio_set_value(DSS_ENABLE_GPIO, 1);
- gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1);
- lcd_enabled = 1;
- return 0;
-}
-
-static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_set_value(DSS_ENABLE_GPIO, 0);
- gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0);
- lcd_enabled = 0;
-}
-
-static struct panel_generic_dpi_data lcd_panel = {
- .name = "generic",
- .platform_enable = omap3_stalker_enable_lcd,
- .platform_disable = omap3_stalker_disable_lcd,
-};
-
-static struct omap_dss_device omap3_stalker_lcd_device = {
- .name = "lcd",
- .driver_name = "generic_dpi_panel",
- .data = &lcd_panel,
- .phy.dpi.data_lines = 24,
- .type = OMAP_DISPLAY_TYPE_DPI,
-};
-
static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
{
return 0;
@@ -194,7 +161,6 @@ static struct omap_dss_device omap3_stalker_dvi_device = {
};
static struct omap_dss_device *omap3_stalker_dss_devices[] = {
- &omap3_stalker_lcd_device,
&omap3_stalker_tv_device,
&omap3_stalker_dvi_device,
};
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
